» Articles » PMID: 38731786

Enhancing Cutin Extraction Efficiency from Industrially Derived Tomato Processing Residues by High-Pressure Homogenization

Overview
Journal Foods
Specialty Biotechnology
Date 2024 May 11
PMID 38731786
Authors
Affiliations
Soon will be listed here.
Abstract

This study primarily aimed to enhance the extraction of cutin from industrial tomato peel residues. Initially, the conventional extraction process was optimized using response surface methodology (RSM). Subsequently, high-pressure homogenization (HPH) was introduced to improve extraction efficiency and sustainability. The optimization process focused on determining the optimal conditions for conventional extraction via chemical hydrolysis, including temperature (100-130 °C), time (15-120 min), and NaOH concentration (1-3%). The optimized conditions, determined as 130 °C, 120 min, and 3% NaOH solution, yielded a maximum cutin extraction of 32.5%. Furthermore, the results indicated that applying HPH pre-treatment to tomato peels before alkaline hydrolysis significantly increased the cutin extraction yield, reaching 46.1%. This represents an approximately 42% increase compared to the conventional process. Importantly, HPH pre-treatment enabled cutin extraction under milder conditions using a 2% NaOH solution, reducing NaOH usage by 33%, while still achieving a substantial cutin yield of 45.6%. FT-IR analysis confirmed that cutin obtained via both conventional and HPH-assisted extraction exhibited similar chemical structures, indicating that the main chemical groups and structure of cutin remained unaltered by HPH treatment. Furthermore, cutin extracts from both conventional and HPH-assisted extraction demonstrated thermal stability up to approximately 200 °C, with less than 5% weight loss according to TGA analysis. These findings underscore the potential of HPH technology to significantly enhance cutin extraction yield from tomato peel residues while utilizing milder chemical hydrolysis conditions, thereby promoting a more sustainable and efficient cutin extraction process.

References
1.
Benitez J, Gonzalez Moreno A, Guzman-Puyol S, Heredia-Guerrero J, Heredia A, Dominguez E . The Response of Tomato Fruit Cuticle Membranes Against Heat and Light. Front Plant Sci. 2022; 12:807723. PMC: 8777011. DOI: 10.3389/fpls.2021.807723. View

2.
Mellinas C, Solaberrieta I, Pelegrin C, Jimenez A, Garrigos M . Valorization of Agro-Industrial Wastes by Ultrasound-Assisted Extraction as a Source of Proteins, Antioxidants and Cutin: A Cascade Approach. Antioxidants (Basel). 2022; 11(9). PMC: 9495669. DOI: 10.3390/antiox11091739. View

3.
Fich E, Segerson N, Rose J . The Plant Polyester Cutin: Biosynthesis, Structure, and Biological Roles. Annu Rev Plant Biol. 2016; 67:207-33. DOI: 10.1146/annurev-arplant-043015-111929. View

4.
Van Audenhove J, Bernaerts T, De Smet V, Delbaere S, Van Loey A, Hendrickx M . The Structure and Composition of Extracted Pectin and Residual Cell Wall Material from Processing Tomato: The Role of a Stepwise Approach versus High-Pressure Homogenization-Facilitated Acid Extraction. Foods. 2021; 10(5). PMC: 8150267. DOI: 10.3390/foods10051064. View

5.
Benitez J, Castillo P, Del Rio J, Leon-Camacho M, Dominguez E, Heredia A . Valorization of Tomato Processing by-Products: Fatty Acid Extraction and Production of Bio-Based Materials. Materials (Basel). 2018; 11(11). PMC: 6266337. DOI: 10.3390/ma11112211. View