3D Printing for Patient-specific Implants in Musculoskeletal Oncology

Overview

Journal EFORT Open Rev

Specialty Orthopedics

Date 2023 May 9

PMID 37158428

Authors

Daniel Kotrych

Andrea Angelini

Andrzej Bohatyrewicz

Pietro Ruggieri

Affiliations

Soon will be listed here.

Abstract

Satisfactory results in terms of functional and oncological outcomes can be obtained in sacral and pelvic malignant bone tumors. Preoperative planning, adequate imaging, and a multidisciplinary approach are needed. 3D-printed prostheses have to fulfill several requirements: (i) mechanical stability, (ii) biocompatibility, (iii) implantability, and (iv) diagnostic compatibility. In this review, we highlight current standards in the use of 3D-printed technology for sacropelvic reconstruction.

Citing Articles

Insights into geometric deviations of medical 3d-printing: a phantom study utilizing error propagation analysis.

Juergensen L, Rischen R, Hasselmann J, Toennemann M, Pollmanns A, Gosheger G 3D Print Med. 2024; 10(1):38.

PMID: 39576468 PMC: 11583775. DOI: 10.1186/s41205-024-00242-x.

Patient-specific 3D-Printed PEEK implants for spinal tumor surgery.

Zaborovskii N, Masevnin S, Smekalenkov O, Murakhovsky V, Ptashnikov D J Orthop. 2024; 62:99-105.

PMID: 39512487 PMC: 11539085. DOI: 10.1016/j.jor.2024.10.024.

Accuracy of pelvic bone segmentation for 3d printing: a study of segmentation accuracy based on anatomic landmarks to evaluate the influence of the observer.

Juergensen L, Rischen R, Toennemann M, Gosheger G, Gehweiler D, Schulze M 3D Print Med. 2024; 10(1):33.

PMID: 39377850 PMC: 11460233. DOI: 10.1186/s41205-024-00237-8.

Bilateral pelvic osteotomy for malunion of a vertical shear fracture with 3D-printed patient-specific cutting guides: a case report.

Casiraghi A, Fratus A, Oransky M, Sancineto C, Galante C, Milano G Eur J Orthop Surg Traumatol. 2024; 34(7):3627-3635.

PMID: 39331135 DOI: 10.1007/s00590-024-04109-z.

Emerging Innovations in Preoperative Planning and Motion Analysis in Orthopedic Surgery.

Berhouet J, Samargandi R Diagnostics (Basel). 2024; 14(13).

PMID: 39001212 PMC: 11240316. DOI: 10.3390/diagnostics14131321.

References

Citak M, Kochsiek L, Gehrke T, Haasper C, Suero E, Mau H . Preliminary results of a 3D-printed acetabular component in the management of extensive defects. Hip Int. 2017; 28(3):266-271. DOI: 10.5301/hipint.5000561. View

Young P, Bell S, Mahendra A . The evolving role of computer-assisted navigation in musculoskeletal oncology. Bone Joint J. 2015; 97-B(2):258-64. DOI: 10.1302/0301-620X.97B2.34461. View

Qadir I, Umer M, Baloch N . Functional outcome of limb salvage surgery with mega-endoprosthetic reconstruction for bone tumors. Arch Orthop Trauma Surg. 2012; 132(9):1227-32. DOI: 10.1007/s00402-012-1542-3. View

Trovarelli G, Cappellari A, Angelini A, Pala E, Ruggieri P . What Is the Survival and Function of Modular Reverse Total Shoulder Prostheses in Patients Undergoing Tumor Resections in Whom an Innervated Deltoid Muscle Can Be Preserved?. Clin Orthop Relat Res. 2019; 477(11):2495-2507. PMC: 6903840. DOI: 10.1097/CORR.0000000000000899. View

Berasi 4th C, Berend K, Adams J, Ruh E, Lombardi Jr A . Are custom triflange acetabular components effective for reconstruction of catastrophic bone loss?. Clin Orthop Relat Res. 2014; 473(2):528-35. PMC: 4294939. DOI: 10.1007/s11999-014-3969-z. View

Puchner S, Funovics P, Bohler C, Kaider A, Stihsen C, Hobusch G . Oncological and surgical outcome after treatment of pelvic sarcomas. PLoS One. 2017; 12(2):e0172203. PMC: 5310872. DOI: 10.1371/journal.pone.0172203. View

Bus M, Boerhout E, Bramer J, Dijkstra P . Clinical outcome of pedestal cup endoprosthetic reconstruction after resection of a peri-acetabular tumour. Bone Joint J. 2014; 96-B(12):1706-12. DOI: 10.1302/0301-620X.96B12.34622. View

Wei R, Guo W, Yang R, Tang X, Yang Y, Ji T . Reconstruction of the pelvic ring after total sacrectomy using a 3D-printed sacral endoprosthesis with re-establishment of spinopelvic stability: a retrospective comparative study. Bone Joint J. 2019; 101-B(7):880-888. DOI: 10.1302/0301-620X.101B7.BJJ-2018-1010.R2. View

ENNEKING W, Dunham W . Resection and reconstruction for primary neoplasms involving the innominate bone. J Bone Joint Surg Am. 1978; 60(6):731-46. View

10.

Ayvaz M, Bekmez S, Mermerkaya M, Caglar O, Acaroglu E, Tokgozoglu A . Long-term results of reconstruction with pelvic allografts after wide resection of pelvic sarcomas. ScientificWorldJournal. 2014; 2014:605019. PMC: 3925599. DOI: 10.1155/2014/605019. View

11.

Kermavnar T, Shannon A, OSullivan K, McCarthy C, Dunne C, OSullivan L . Three-Dimensional Printing of Medical Devices Used Directly to Treat Patients: A Systematic Review. 3D Print Addit Manuf. 2023; 8(6):366-408. PMC: 9828627. DOI: 10.1089/3dp.2020.0324. View

12.

Cheong D, Letson G . Computer-assisted navigation and musculoskeletal sarcoma surgery. Cancer Control. 2011; 18(3):171-6. DOI: 10.1177/107327481101800304. View

13.

Palmquist A, Shah F, Emanuelsson L, Omar O, Suska F . A technique for evaluating bone ingrowth into 3D printed, porous Ti6Al4V implants accurately using X-ray micro-computed tomography and histomorphometry. Micron. 2016; 94:1-8. DOI: 10.1016/j.micron.2016.11.009. View

14.

Caracciolo J, Letson G . Radiologic Approach to Bone and Soft Tissue Sarcomas. Surg Clin North Am. 2016; 96(5):963-76. DOI: 10.1016/j.suc.2016.05.007. View

15.

Fang C, Cai H, Kuong E, Chui E, Siu Y, Ji T . Surgical applications of three-dimensional printing in the pelvis and acetabulum: from models and tools to implants. Unfallchirurg. 2019; 122(4):278-285. PMC: 6447520. DOI: 10.1007/s00113-019-0626-8. View

16.

Albergo J, Farfalli G, Ayerza M, Ritacco L, Aponte-Tinao L . Computer-assisted surgery (CAS) in orthopedic oncology. Which were the indications, problems and results in our first consecutive 203 patients?. Eur J Surg Oncol. 2020; 47(2):424-428. DOI: 10.1016/j.ejso.2020.06.008. View

17.

Ahlmann E, Menendez L, Kermani C, Gotha H . Survivorship and clinical outcome of modular endoprosthetic reconstruction for neoplastic disease of the lower limb. J Bone Joint Surg Br. 2006; 88(6):790-5. DOI: 10.1302/0301-620X.88B6.17519. View

18.

Mavrogenis A, Angelini A, Errani C, Rimondi E . How should musculoskeletal biopsies be performed?. Orthopedics. 2014; 37(9):585-8. DOI: 10.3928/01477447-20140825-03. View

19.

Zhang Q, Zhou J, Zhi P, Liu L, Liu C, Fang A . 3D printing method for bone tissue engineering scaffold. Med Nov Technol Devices. 2023; 17:None. PMC: 9995276. DOI: 10.1016/j.medntd.2022.100205. View

20.

Angelini A, Calabro T, Pala E, Trovarelli G, Maraldi M, Ruggieri P . Resection and reconstruction of pelvic bone tumors. Orthopedics. 2015; 38(2):87-93. DOI: 10.3928/01477447-20150204-51. View