» Articles » PMID: 35909359

10 Years of Research on Toughness Enhancement of Structural Ceramics by Graphene

Overview
Authors
Affiliations
Soon will be listed here.
Abstract

Over the past decade, a new family of ceramic matrix composites has been developed from the incorporation of homogeneously dispersed graphene-based fillers (graphene nanoplatelets/GNP, graphene oxide sheets/rGO or graphene nanoribbons/GNR) into the ceramic matrices. These composites have shown a significant increment of their fracture toughness accompanied by other electrical and thermal functionalities, which make them potentially attractive for a wide range of applications. Here, the main methods for testing the fracture toughness of these composites are described, then the principal observations on the reinforcing mechanisms responsible for this improvement are briefly reviewed, and we discuss the relation with graphene platelets type, morphology and alignment. This article is part of the theme issue 'Nanocracks in nature and industry'.

Citing Articles

An Armour Structure to Suppress the Brittle Failure of Ceramic Coatings.

Liu W, Bao F, Zhang Y, Wang J, Liang X Materials (Basel). 2023; 16(14).

PMID: 37512215 PMC: 10381692. DOI: 10.3390/ma16144941.


Integrated Intelligent Method Based on Fuzzy Logic for Optimizing Laser Microfabrication Processing of GnPs-Improved Alumina Nanocomposites.

Alqahtani K, Nasr M, Anwar S, Al-Samhan A, Alhaag M, Kaid H Micromachines (Basel). 2023; 14(4).

PMID: 37420983 PMC: 10141361. DOI: 10.3390/mi14040750.


Nanocracks in nature and industry.

Kendall K Philos Trans A Math Phys Eng Sci. 2022; 380(2232):20210350.

PMID: 35909360 PMC: 9340276. DOI: 10.1098/rsta.2021.0350.

References
1.
Walker L, Marotto V, Rafiee M, Koratkar N, Corral E . Toughening in graphene ceramic composites. ACS Nano. 2011; 5(4):3182-90. DOI: 10.1021/nn200319d. View

2.
Zhang Z, Zhang X, Wang Y, Wang Y, Zhang Y, Xu C . Crack Propagation and Fracture Toughness of Graphene Probed by Raman Spectroscopy. ACS Nano. 2019; 13(9):10327-10332. DOI: 10.1021/acsnano.9b03999. View

3.
Cheng Y, An Y, Liu Y, Wei Q, Han W, Zhang X . ZrB-Based "Brick-and-Mortar" Composites Achieving the Synergy of Superior Damage Tolerance and Ablation Resistance. ACS Appl Mater Interfaces. 2020; 12(29):33246-33255. DOI: 10.1021/acsami.0c08206. View

4.
Garcia-Tunon E, Feilden E, Zheng H, DElia E, Leong A, Saiz E . Graphene Oxide: An All-in-One Processing Additive for 3D Printing. ACS Appl Mater Interfaces. 2017; 9(38):32977-32989. DOI: 10.1021/acsami.7b07717. View

5.
Sun Z, Zhao J, Wang X, Cui E, Yu H . Reinforcing Mechanisms of Graphene and Nano-TiC in AlO-Based Ceramic-Tool Materials. Nanomaterials (Basel). 2020; 10(9). PMC: 7558386. DOI: 10.3390/nano10091815. View