» Articles » PMID: 9771387

Contribution of the Cortical Shell of Vertebrae to Mechanical Behaviour of the Lumbar Vertebrae with Implications for Predicting Fracture Risk

Overview
Journal Br J Radiol
Specialty Radiology
Date 1998 Oct 15
PMID 9771387
Citations 17
Authors
Affiliations
Soon will be listed here.
Abstract

In the diagnosis of osteoporosis using single energy quantitative CT (SE-QCT) on the axial skeleton, only spongy bone mineral density (BMD) is used at present. Although the density of cortical bone is also determined by most QCT methods, it is not used for evaluation. The objective of this study was to determine the extent to which the cortical bone of the lumbar vertebral bodies accounts for their load-bearing capacity and failure behaviour, and to use this information to suggest improvements in the differential diagnosis of osteoporosis. Investigations were conducted in a clinical, theoretical-numerical and biomechanical-experimental context. Cortical (BMDC) and spongy (BMDS) bone mineral density was measured by SE-QCT/85 kV on 179 patients (68 males, 111 females). These bone densities were matched with the vertebral body fractures previously determined from conventional X-rays. A finite element model was used to study the variation in structural and material parameters of the vertebral body. 19 vertebral bodies that had been removed post-mortem were available for the biomechanical-experimental investigations. Spongy and cortical bone densities were also determined by SE-QCT on these vertebral bodies. Their failure load was then measured in the axial compression test. These investigations show that, in addition to the spongiosa, the cortical shell plays an important role in the load-bearing capacity of the vertebral body. If the spongiosa is weakened due to a loss of BMD, the residual load-bearing capacity of the vertebral bodies is increasingly shouldered by the cortical bone. The lower susceptibility to fracture in men compared with women when spongy bone mineral density is reduced can thus be attributed to the lack of a reduction in cortical bone mineral density. It is recommended that the BMDC also be evaluated in future, especially in the diagnosis of bone mass losses in women, to improve the estimation of the individual fracture risk.

Citing Articles

Biomechanical Analysis of Diffuse Idiopathic Skeletal Hyperostosis and Osteoporosis: Vertebral Fracture Risk Evaluation Using Finite Element Modeling with Clinical and Micro-CT Data in an Elderly Donor.

Schroder G, Mittlmeier T, Falk S, Gotz A, Kruse J, Akl E Biomedicines. 2024; 12(11).

PMID: 39595062 PMC: 11592239. DOI: 10.3390/biomedicines12112496.


Persistent changes in calcium-regulating hormones and bone turnover markers in living kidney donors more than 20 years after donation.

Grossardt B, Kremers H, Miller A, Kasiske B, Matas A, Khosla S JBMR Plus. 2024; 8(7):ziae067.

PMID: 38868597 PMC: 11166890. DOI: 10.1093/jbmrpl/ziae067.


Breaking strength and bone microarchitecture in osteoporosis: a biomechanical approximation based on load tests in 104 human vertebrae from the cervical, thoracic, and lumbar spines of 13 body donors.

Schroder G, Reichel M, Spiegel S, Schulze M, Gotz A, Bugaichuk S J Orthop Surg Res. 2022; 17(1):228.

PMID: 35410435 PMC: 8996654. DOI: 10.1186/s13018-022-03105-5.


Extended compilation of autopsy-material measurements on lumbar ultimate compressive strength for deriving reference values in ergonomic work design: The Revised Dortmund Recommendations.

Jager M EXCLI J. 2018; 17:362-385.

PMID: 29805345 PMC: 5962898. DOI: 10.17179/excli2018-1206.


Specimen-specific vertebral fracture modeling: a feasibility study using the extended finite element method.

Giambini H, Qin X, Dragomir-Daescu D, An K, Nassr A Med Biol Eng Comput. 2015; 54(4):583-93.

PMID: 26239163 PMC: 4852468. DOI: 10.1007/s11517-015-1348-x.