» Articles » PMID: 39005826

PH-Responsive Biocompatible Fluorescent Hydrogel for Selective Sensing and Adsorptive Recovery of Dysprosium

Overview
Journal ACS Omega
Specialty Chemistry
Date 2024 Jul 15
PMID 39005826
Authors
Affiliations
Soon will be listed here.
Abstract

The elevated accumulation of electronic wastes, especially containing Dysprosium ion [i.e., Dy(III)], is emerging as a potential environmental threat. To overcome the deleterious effects of Dy(III), detection and removal of Dy(III) is crucial. Moreover, recovery of high-value Dy(III) is economically beneficial. However, the availability of a single material, capable of sensing Dy(III) in nanomolar concentration and simultaneously adsorbing it with high adsorption capacity (AC), is rare. Therefore, to solve this problem, a pH-responsive fluorescent amino graphene oxide-impregnated-engineered polymer hydrogel () has been synthesized, suitable for selective sensing of Dy(III) in nanomolar concentration and adsorbing it from wastewater at ambient temperature. This terpolymeric hydrogel is synthesized from two nonfluorescent monomers, propenoic acid (PNA) and prop-2-enamide (PEAM), along with an in situ generated comonomer (3-acrylamidopropanoic acid/AAPPA) through N- activation during polymerization. Surface properties and structural details of are established using NMR, FTIR, XRD, TEM, SEM, EDX, Raman, MALDI-mass, and DLS studies. The exhibits blue fluorescence with turn-off sensing of Dy(III) with the detection limit of 1.88 × 10 (M). The maximum AC of is 41.97 ± 0.39 mg g. The developed shows consistent adsorption-desorption property over five cycles, with more than 90% desorption efficiency per cycle, confirming significant recovery of the valuable Dy(III). From Logic gate calculations, complexation of Dy(III) and may be the reason behind fluorescence quenching. The also shows antibacterial action against ∼3 × 10 cells mL of solution. Overall, the developed pH-responsive engineered hydrogel can be used as a potential low-cost sensing device and reusable adsorbent for Dy(III).

References
1.
Swift T, Swanson L, Geoghegan M, Rimmer S . The pH-responsive behaviour of poly(acrylic acid) in aqueous solution is dependent on molar mass. Soft Matter. 2016; 12(9):2542-9. DOI: 10.1039/c5sm02693h. View

2.
Mondal H, Datta B . Banana Peel Derived Chitosan-Grafted Biocomposite for Recovery of NH and PO. ACS Omega. 2023; 8(46):43674-43689. PMC: 10666154. DOI: 10.1021/acsomega.3c05229. View

3.
Mondal H, Karmakar M, Dutta A, Mahapatra M, Deb M, Mitra M . Tetrapolymer Network Hydrogels via Gum Ghatti-Grafted and N-H/C-H-Activated Allocation of Monomers for Composition-Dependent Superadsorption of Metal Ions. ACS Omega. 2019; 3(9):10692-10708. PMC: 6644869. DOI: 10.1021/acsomega.8b01218. View

4.
Mondal H, Karmakar M, Chattopadhyay P, Singha N . New property-performance optimization of scalable alginate-g-terpolymer for Ce(IV), Mo(VI), and W(VI) exclusions. Carbohydr Polym. 2020; 245:116370. DOI: 10.1016/j.carbpol.2020.116370. View

5.
Mondal H, Karmakar M, Datta B . An MXene-Grafted Terpolymer Hydrogel for Adsorptive Immobilization of Toxic Pb(II) and Post-Adsorption Application of Metal Ion Hydrogel. Gels. 2023; 9(10). PMC: 10606399. DOI: 10.3390/gels9100827. View