Material Extrusion Additive Manufacturing of Dense Pastes Consisting of Macroscopic Particles

Overview

Journal MRS Commun

Publisher Cambridge University Press

Date 2022 Oct 31

PMID 36312900

Authors

Alexandra Marnot

Alexandra Dobbs

Blair Brettmann

Affiliations

Soon will be listed here.

Abstract

Graphical Abstract:

Citing Articles

Design of Shape Forming Elements for Architected Composites via Bayesian Optimization and Genetic Algorithms: A Concept Evaluation.

Kazmer D, Olanrewaju R, Elbert D, Nguyen T Materials (Basel). 2024; 17(21).

PMID: 39517609 PMC: 11547659. DOI: 10.3390/ma17215339.

Polydiolcitrate-MoS Composite for 3D Printing Radio-Opaque, Bioresorbable Vascular Scaffolds.

Szydlowska B, Ding Y, Moore C, Cai Z, Torres-Castanedo C, Collins C ACS Appl Mater Interfaces. 2024; 16(34):45422-45432.

PMID: 39102678 PMC: 11368090. DOI: 10.1021/acsami.4c07364.

Cold Temperature Direct Air CO Capture with Amine-Loaded Metal-Organic Framework Monoliths.

Wang Y, Rim G, Song M, Holmes H, Jones C, Lively R ACS Appl Mater Interfaces. 2023; 16(1):1404-1415.

PMID: 38109480 PMC: 10788822. DOI: 10.1021/acsami.3c13528.

A polydiolcitrate-MoS composite for 3D printing Radio-opaque, Bioresorbable Vascular Scaffolds.

Szydlowska B, Ding Y, Moore C, Cai Z, Torres-Castanedo C, Jones E bioRxiv. 2023; .

PMID: 37961681 PMC: 10634906. DOI: 10.1101/2023.10.27.564364.

Applicability of UV-Curable Binders in High Solid Suspensions for Direct-Ink-Write 3D Printing in Extremely Cold Temperatures.

Marnot A, Konzelman L, Jones J, Hill C, Brettmann B ACS Appl Mater Interfaces. 2023; 15(43):50378-50390.

PMID: 37862044 PMC: 10623509. DOI: 10.1021/acsami.3c11742.

References

Weeks E . Introduction to the Colloidal Glass Transition. ACS Macro Lett. 2022; 6(1):27-34. DOI: 10.1021/acsmacrolett.6b00826. View

Lode A, Meissner K, Luo Y, Sonntag F, Glorius S, Nies B . Fabrication of porous scaffolds by three-dimensional plotting of a pasty calcium phosphate bone cement under mild conditions. J Tissue Eng Regen Med. 2012; 8(9):682-93. DOI: 10.1002/term.1563. View

Jakus A, Koube K, Geisendorfer N, Shah R . Robust and Elastic Lunar and Martian Structures from 3D-Printed Regolith Inks. Sci Rep. 2017; 7:44931. PMC: 5357966. DOI: 10.1038/srep44931. View

Khaled S, Burley J, Alexander M, Yang J, Roberts C . 3D printing of five-in-one dose combination polypill with defined immediate and sustained release profiles. J Control Release. 2015; 217:308-14. DOI: 10.1016/j.jconrel.2015.09.028. View

ONeill R, Royer J, Poon W . Liquid Migration in Shear Thickening Suspensions Flowing through Constrictions. Phys Rev Lett. 2019; 123(12):128002. DOI: 10.1103/PhysRevLett.123.128002. View

Koos E, Willenbacher N . Capillary forces in suspension rheology. Science. 2011; 331(6019):897-900. DOI: 10.1126/science.1199243. View

He F, Becker G, Litowski J, Narhi L, Brems D, Razinkov V . High-throughput dynamic light scattering method for measuring viscosity of concentrated protein solutions. Anal Biochem. 2009; 399(1):141-3. DOI: 10.1016/j.ab.2009.12.003. View

Abaci A, Gedeon C, Kuna A, Guvendiren M . Additive Manufacturing of Oral Tablets: Technologies, Materials and Printed Tablets. Pharmaceutics. 2021; 13(2). PMC: 7912000. DOI: 10.3390/pharmaceutics13020156. View

Hinton T, Jallerat Q, Palchesko R, Park J, Grodzicki M, Shue H . Three-dimensional printing of complex biological structures by freeform reversible embedding of suspended hydrogels. Sci Adv. 2015; 1(9):e1500758. PMC: 4646826. DOI: 10.1126/sciadv.1500758. View

10.

Genovese D . Shear rheology of hard-sphere, dispersed, and aggregated suspensions, and filler-matrix composites. Adv Colloid Interface Sci. 2012; 171-172:1-16. DOI: 10.1016/j.cis.2011.12.005. View

11.

Hodaei A, Akhlaghi O, Khani N, Aytas T, Sezer D, Tatli B . Single Additive Enables 3D Printing of Highly Loaded Iron Oxide Suspensions. ACS Appl Mater Interfaces. 2018; 10(11):9873-9881. DOI: 10.1021/acsami.8b00551. View

12.

Zhu C, Pascall A, Dudukovic N, Worsley M, Kuntz J, Duoss E . Colloidal Materials for 3D Printing. Annu Rev Chem Biomol Eng. 2019; 10:17-42. DOI: 10.1146/annurev-chembioeng-060718-030133. View

13.

Nagy Z, Braatz R . Advances and new directions in crystallization control. Annu Rev Chem Biomol Eng. 2012; 3:55-75. DOI: 10.1146/annurev-chembioeng-062011-081043. View

14.

Ventola C . Medical Applications for 3D Printing: Current and Projected Uses. P T. 2014; 39(10):704-11. PMC: 4189697. View

15.

Lepowsky E, Tasoglu S . 3D printing for drug manufacturing: A perspective on the future of pharmaceuticals. Int J Bioprint. 2020; 4(1):119. PMC: 7582011. DOI: 10.18063/IJB.v4i1.119. View

16.

Kalyon D, Aktas S . Factors affecting the rheology and processability of highly filled suspensions. Annu Rev Chem Biomol Eng. 2014; 5:229-54. DOI: 10.1146/annurev-chembioeng-060713-040211. View

17.

Davidson E, Kotikian A, Li S, Aizenberg J, Lewis J . 3D Printable and Reconfigurable Liquid Crystal Elastomers with Light-Induced Shape Memory via Dynamic Bond Exchange. Adv Mater. 2019; 32(1):e1905682. DOI: 10.1002/adma.201905682. View

18.

Buj-Corral I, Dominguez-Fernandez A, Gomez-Gejo A . Effect of Printing Parameters on Dimensional Error and Surface Roughness Obtained in Direct Ink Writing (DIW) Processes. Materials (Basel). 2020; 13(9). PMC: 7254269. DOI: 10.3390/ma13092157. View

19.

ONeill R, McCarthy H, Montufar E, Ginebra M, Wilson D, Lennon A . Critical review: Injectability of calcium phosphate pastes and cements. Acta Biomater. 2016; 50:1-19. DOI: 10.1016/j.actbio.2016.11.019. View

20.

Zaccarelli E, Poon W . Colloidal glasses and gels: The interplay of bonding and caging. Proc Natl Acad Sci U S A. 2009; 106(36):15203-8. PMC: 2741229. DOI: 10.1073/pnas.0902294106. View