Clindamycin-Based 3D-Printed and Electrospun Coatings for Treatment of Implant-Related Infections

Overview

Journal Materials (Basel)

Publisher MDPI

Date 2021 Apr 3

PMID 33802712

Citations 18

Authors

Tina Maver

Tinkara Mastnak

Mihela Mihelic

Uros Maver

Matjaz Finsgar

Affiliations

Soon will be listed here.

Abstract

This study presents the development and characterisation of two novel bioactive coatings deposited on TiAlV and AISI 316LVM substrates. The coatings were prepared using 3D printing and electrospinning. The 3D-printed coating consisted of the cellulose nanofibril suspension, alginate, and carboxymethylcellulose (CMC), while CMC and polyethylene oxide were used to prepare the electrospun coating. Both coatings were loaded with the antibiotic clindamycin (CLIN), which is a bacteriostatic lincosamide known for its activity against streptococci, staphylococci, pneumococci, Bacteroides species, and other anaerobes. Initial characterisation of the coatings was performed by attenuated total reflectance Fourier transform infrared spectroscopy, field emission scanning electron microscopy, and atomic force microscopy. Furthermore, the contact angle measurements, swelling rate, and biodegradability of the coatings were investigated. The released concentration of CLIN in PBS (pH = 7.4 at 25 °C) was determined by UV-VIS spectrophotometry. The coatings' biocompatibility was determined using an MTT (3(4,5 dimethylthiazolyl-2)-2,5-diphenyltetrazolium bromide) assay using an osteoblast cell culture (hFOB 1.19, ATCC CRL 11372).

Citing Articles

An Antibacterial-Loaded PLA 3D-Printed Model for Temporary Prosthesis in Arthroplasty Infections: Evaluation of the Impact of Layer Thickness on the Mechanical Strength of a Construct and Drug Release.

Tamarit-Martinez C, Bernat-Just L, Bueno-Lopez C, Alambiaga-Caravaca A, Merino V, Lopez-Castellano A Pharmaceutics. 2024; 16(9).

PMID: 39339188 PMC: 11434902. DOI: 10.3390/pharmaceutics16091151.

Targeted Clindamycin Delivery Systems: Promising Options for Preventing and Treating Bacterial Infections Using Biomaterials.

Slota D, Jampilek J, Sobczak-Kupiec A Int J Mol Sci. 2024; 25(8).

PMID: 38673971 PMC: 11050486. DOI: 10.3390/ijms25084386.

Selective Delivery of Clindamycin Using a Combination of Bacterially Sensitive Microparticle and Separable Effervescent Microarray Patch on Bacteria Causing Diabetic Foot Infection.

Fauziah N, Safirah N, Rahmadani I, Hidayat M, Fadhilah N, Djide N Pharm Res. 2024; 41(5):967-982.

PMID: 38637438 DOI: 10.1007/s11095-024-03697-z.

Recent Advances in Antibacterial Coatings to Combat Orthopedic Implant-Associated Infections.

Akay S, Yaghmur A Molecules. 2024; 29(5).

PMID: 38474684 PMC: 10935003. DOI: 10.3390/molecules29051172.

Development of a Bilayer Tablet by Fused Deposition Modeling as a Sustained-Release Drug Delivery System.

Crisan A, Porfire A, Iurian S, Rus L, Lucacel Ciceo R, Turza A Pharmaceuticals (Basel). 2023; 16(9).

PMID: 37765129 PMC: 10537489. DOI: 10.3390/ph16091321.

References

Ehlert M, Radtke A, Roszek K, Jedrzejewski T, Piszczek P . Assessment of Titanate Nanolayers in Terms of Their Physicochemical and Biological Properties. Materials (Basel). 2021; 14(4). PMC: 7915217. DOI: 10.3390/ma14040806. View

Rony L, Lancigu R, Hubert L . Intraosseous metal implants in orthopedics: A review. Morphologie. 2018; 102(339):231-242. DOI: 10.1016/j.morpho.2018.09.003. View

Long J, Nand A, Ray S . Application of Spectroscopy in Additive Manufacturing. Materials (Basel). 2021; 14(1). PMC: 7795079. DOI: 10.3390/ma14010203. View

Dwivedi A, Mazumder A, Nasongkla N . Layer-by-layer nanocoating of antibacterial niosome on orthopedic implant. Int J Pharm. 2018; 547(1-2):235-243. DOI: 10.1016/j.ijpharm.2018.05.075. View

Chen Z, Song Y, Zhang J, Liu W, Cui J, Li H . Laminated electrospun nHA/PHB-composite scaffolds mimicking bone extracellular matrix for bone tissue engineering. Mater Sci Eng C Mater Biol Appl. 2016; 72:341-351. DOI: 10.1016/j.msec.2016.11.070. View

Khosravani M . Mechanical behavior of restorative dental composites under various loading conditions. J Mech Behav Biomed Mater. 2019; 93:151-157. DOI: 10.1016/j.jmbbm.2019.02.009. View

Prasad K, Bazaka O, Chua M, Rochford M, Fedrick L, Spoor J . Metallic Biomaterials: Current Challenges and Opportunities. Materials (Basel). 2017; 10(8). PMC: 5578250. DOI: 10.3390/ma10080884. View

Kumar S, Nehra M, Kedia D, Dilbaghi N, Tankeshwar K, Kim K . Nanotechnology-based biomaterials for orthopaedic applications: Recent advances and future prospects. Mater Sci Eng C Mater Biol Appl. 2019; 106:110154. DOI: 10.1016/j.msec.2019.110154. View

Albrektsson T, Johansson C . Osteoinduction, osteoconduction and osseointegration. Eur Spine J. 2001; 10 Suppl 2:S96-101. PMC: 3611551. DOI: 10.1007/s005860100282. View

10.

Gasparic P, Kurecic M, Kargl R, Maver U, Gradisnik L, Hribernik S . Nanofibrous polysaccharide hydroxyapatite composites with biocompatibility against human osteoblasts. Carbohydr Polym. 2017; 177:388-396. DOI: 10.1016/j.carbpol.2017.08.111. View

11.

Antoniac I, Adam R, Bita A, Miculescu M, Trante O, Petrescu I . Comparative Assessment of In Vitro and In Vivo Biodegradation of Mg-1Ca Magnesium Alloys for Orthopedic Applications. Materials (Basel). 2020; 14(1). PMC: 7795943. DOI: 10.3390/ma14010084. View

12.

Liechty W, Kryscio D, Slaughter B, Peppas N . Polymers for drug delivery systems. Annu Rev Chem Biomol Eng. 2012; 1:149-73. PMC: 3438887. DOI: 10.1146/annurev-chembioeng-073009-100847. View

13.

Oryan A, Alidadi S, Moshiri A, Maffulli N . Bone regenerative medicine: classic options, novel strategies, and future directions. J Orthop Surg Res. 2014; 9(1):18. PMC: 3995444. DOI: 10.1186/1749-799X-9-18. View

14.

Rueden C, Schindelin J, Hiner M, DeZonia B, Walter A, Arena E . ImageJ2: ImageJ for the next generation of scientific image data. BMC Bioinformatics. 2017; 18(1):529. PMC: 5708080. DOI: 10.1186/s12859-017-1934-z. View

15.

Dogan E, Bhusal A, Cecen B, Miri A . 3D Printing metamaterials towards tissue engineering. Appl Mater Today. 2020; 20. PMC: 7446732. DOI: 10.1016/j.apmt.2020.100752. View

16.

Romano C, Tsuchiya H, Morelli I, Battaglia A, Drago L . Antibacterial coating of implants: are we missing something?. Bone Joint Res. 2019; 8(5):199-206. PMC: 6548976. DOI: 10.1302/2046-3758.85.BJR-2018-0316. View

17.

Wang M, Tang T . Surface treatment strategies to combat implant-related infection from the beginning. J Orthop Translat. 2019; 17:42-54. PMC: 6551355. DOI: 10.1016/j.jot.2018.09.001. View

18.

Maver U, Xhanari K, Zizek M, Korte D, Gradisnik L, Franko M . A combination of interdisciplinary analytical tools for evaluation of multi-layered coatings on medical grade stainless steel for biomedical applications. Eur J Pharm Biopharm. 2018; 128:230-246. DOI: 10.1016/j.ejpb.2018.05.002. View

19.

Thornley P, Evaniew N, Riediger M, Winemaker M, Bhandari M, Ghert M . Postoperative antibiotic prophylaxis in total hip and knee arthroplasty: a systematic review and meta-analysis of randomized controlled trials. CMAJ Open. 2015; 3(3):E338-43. PMC: 4596117. DOI: 10.9778/cmajo.20150012. View

20.

Mosmann T . Rapid colorimetric assay for cellular growth and survival: application to proliferation and cytotoxicity assays. J Immunol Methods. 1983; 65(1-2):55-63. DOI: 10.1016/0022-1759(83)90303-4. View