» Articles » PMID: 32830341

Elucidating the Opportunities and Challenges for Nanocellulose Spinning

Overview
Journal Adv Mater
Date 2020 Aug 25
PMID 32830341
Citations 15
Authors
Affiliations
Soon will be listed here.
Abstract

Man-made continuous fibers play an essential role in society today. With the increase in global sustainability challenges, there is a broad spectrum of societal needs where the development of advanced biobased fibers could provide means to address the challenges. Biobased regenerated fibers, produced from dissolved cellulose are widely used today for clothes, upholstery, and linens. With new developments in the area of advanced biobased fibers, it would be possible to compete with high-performance synthetic fibers such as glass fibers and carbon fibers as well as to provide unique functionalities. One possible development is to fabricate fibers by spinning filaments from nanocellulose, Nature's nanoscale high-performance building block, which will require detailed insights into nanoscale assembly mechanisms during spinning, as well as knowledge regarding possible functionalization. If successful, this could result in a new class of man-made biobased fibers. This work aims to identify the progress made in the field of spinning of nanocellulose filaments, as well as outline necessary steps for efficient fabrication of such nanocellulose-based filaments with controlled and predictable properties.

Citing Articles

Self-Assembly Behavior of Collagen and Its Composite Materials: Preparation, Characterizations, and Biomedical Engineering and Allied Applications.

Yue C, Ding C, Xu M, Hu M, Zhang R Gels. 2024; 10(10).

PMID: 39451295 PMC: 11507467. DOI: 10.3390/gels10100642.


Solvent-Dependent Dynamics of Cellulose Nanocrystals in Process-Relevant Flow Fields.

Wang R, He H, Tian J, Chodankar S, Hsiao B, Rosen T Langmuir. 2024; 40(25):13319-13329.

PMID: 38859701 PMC: 11210288. DOI: 10.1021/acs.langmuir.4c01846.


The flow of anisotropic nanoparticles in solution and in blood.

Lovegrove J, Kent B, Forster S, Garvey C, Stenzel M Exploration (Beijing). 2024; 3(6):20220075.

PMID: 38264690 PMC: 10742203. DOI: 10.1002/EXP.20220075.


Effect of M-type reactive dyes on dyeing properties of twisted bamboo fiber bundles.

Hu S, Zhao W, Rong Y, Zheng Y, Huang L, Yang F RSC Adv. 2023; 13(47):33514-33524.

PMID: 38025847 PMC: 10646809. DOI: 10.1039/d3ra02957c.


Fused-Deposition Modeling 3D Printing of Short-Cut Carbon-Fiber-Reinforced PA6 Composites for Strengthening, Toughening, and Light Weighting.

Sun B, Mubarak S, Zhang G, Peng K, Hu X, Zhang Q Polymers (Basel). 2023; 15(18).

PMID: 37765576 PMC: 10534845. DOI: 10.3390/polym15183722.


References
1.
Saito T, Kimura S, Nishiyama Y, Isogai A . Cellulose nanofibers prepared by TEMPO-mediated oxidation of native cellulose. Biomacromolecules. 2007; 8(8):2485-91. DOI: 10.1021/bm0703970. View

2.
Yao J, Chen S, Chen Y, Wang B, Pei Q, Wang H . Macrofibers with High Mechanical Performance Based on Aligned Bacterial Cellulose Nanofibers. ACS Appl Mater Interfaces. 2017; 9(24):20330-20339. DOI: 10.1021/acsami.6b14650. View

3.
Wang L, Lundahl M, Greca L, Papageorgiou A, Borghei M, Rojas O . Effects of non-solvents and electrolytes on the formation and properties of cellulose I filaments. Sci Rep. 2019; 9(1):16691. PMC: 6854096. DOI: 10.1038/s41598-019-53215-0. View

4.
Mao Y, Liu K, Zhan C, Geng L, Chu B, Hsiao B . Characterization of Nanocellulose Using Small-Angle Neutron, X-ray, and Dynamic Light Scattering Techniques. J Phys Chem B. 2017; 121(6):1340-1351. DOI: 10.1021/acs.jpcb.6b11425. View

5.
Walther A, Timonen J, Diez I, Laukkanen A, Ikkala O . Multifunctional high-performance biofibers based on wet-extrusion of renewable native cellulose nanofibrils. Adv Mater. 2011; 23(26):2924-8. DOI: 10.1002/adma.201100580. View