» Articles » PMID: 32537396

NiO/Perovskite Heterojunction Contact Engineering for Highly Efficient and Stable Perovskite Solar Cells

Overview
Journal Adv Sci (Weinh)
Date 2020 Jun 16
PMID 32537396
Citations 14
Authors
Affiliations
Soon will be listed here.
Abstract

Recent research shows that the interface state in perovskite solar cells is the main factor which affects the stability and performance of the device, and interface engineering including strain engineering is an effective method to solve this issue. In this work, a CsBr buffer layer is inserted between NiO hole transport layer and perovskite layer to relieve the lattice mismatch induced interface stress and induce more ordered crystal growth. The experimental and theoretical results show that the addition of the CsBr buffer layer optimizes the interface between the perovskite absorber layer and the NiO hole transport layer, reduces interface defects and traps, and enhances the hole extraction/transfer. The experimental results show that the power conversion efficiency of optimal device reaches up to 19.7% which is significantly higher than the efficiency of the device without the CsBr buffer layer. Meanwhile, the device stability is also improved. This work provides a deep understanding of the NiO /perovskite interface and provides a new strategy for interface optimization.

Citing Articles

Spontaneous curvature in two-dimensional van der Waals heterostructures.

Gao Y, Deng F, He R, Zhong Z Nat Commun. 2025; 16(1):717.

PMID: 39819969 PMC: 11739405. DOI: 10.1038/s41467-025-56055-x.


Synergistic Redox Modulation for High-Performance Nickel Oxide-Based Inverted Perovskite Solar Modules.

Liu Y, Ding B, Zhang G, Ma X, Wang Y, Zhang X Adv Sci (Weinh). 2024; 11(21):e2309111.

PMID: 38501909 PMC: 11151082. DOI: 10.1002/advs.202309111.


Enhancing Surface Modification and Carrier Extraction in Inverted Perovskite Solar Cells via Self-Assembled Monolayers.

Kim G, Kim H, Kim M, Sin J, Kim M, Kim J Nanomaterials (Basel). 2024; 14(2).

PMID: 38276732 PMC: 10821478. DOI: 10.3390/nano14020214.


Strain Effects on Flexible Perovskite Solar Cells.

Liang H, Yang W, Xia J, Gu H, Meng X, Yang G Adv Sci (Weinh). 2023; 10(35):e2304733.

PMID: 37828594 PMC: 10724416. DOI: 10.1002/advs.202304733.


Atomic scale insights into the epitaxial growth mechanism of 2D CrTe on mica.

Yang H, Wu A, Yi H, Cao W, Yao J, Yang G Nanoscale Adv. 2023; 5(3):693-700.

PMID: 36756523 PMC: 9890546. DOI: 10.1039/d2na00835a.


References
1.
Luo D, Zhao L, Wu J, Hu Q, Zhang Y, Xu Z . Dual-Source Precursor Approach for Highly Efficient Inverted Planar Heterojunction Perovskite Solar Cells. Adv Mater. 2017; 29(19). DOI: 10.1002/adma.201604758. View

2.
Li G, Jiang Y, Deng S, Tam A, Xu P, Wong M . Overcoming the Limitations of Sputtered Nickel Oxide for High-Efficiency and Large-Area Perovskite Solar Cells. Adv Sci (Weinh). 2017; 4(12):1700463. PMC: 5737142. DOI: 10.1002/advs.201700463. View

3.
Kojima A, Teshima K, Shirai Y, Miyasaka T . Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. J Am Chem Soc. 2009; 131(17):6050-1. DOI: 10.1021/ja809598r. View

4.
Ye S, Rao H, Yan W, Li Y, Sun W, Peng H . A Strategy to Simplify the Preparation Process of Perovskite Solar Cells by Co-deposition of a Hole-Conductor and a Perovskite Layer. Adv Mater. 2016; 28(43):9648-9654. DOI: 10.1002/adma.201603850. View

5.
Su J, Feng L, Zhang Y, Liu Z . The modulation of Schottky barriers of metal-MoS2 contacts via BN-MoS2 heterostructures. Phys Chem Chem Phys. 2016; 18(25):16882-9. DOI: 10.1039/c6cp02132h. View