» Articles » PMID: 31107312

High Oxidation Stability of Tea Polyphenol-stabilized Highly Crosslinked UHMWPE Under an in Vitro Aggressive Oxidative Condition

Overview
Publisher Wolters Kluwer
Specialty Orthopedics
Date 2019 May 21
PMID 31107312
Citations 1
Authors
Affiliations
Soon will be listed here.
Abstract

Background: Synovial fluid components, especially lipids, can trigger oxidation of ultrahigh-molecular-weight polyethylene (UHMWPE) artificial joint components in vivo. The use of antioxidants such as vitamin E effectively diminishes the oxidative cascade by capturing free radicals and reducing the oxidation potential of UHMWPE implants. Using a thermo-oxidative aging method, we recently found that tea polyphenols can enhance the oxidation resistance of irradiated UHMWPE in comparison with commercial vitamin E. However, it is yet unknown whether tea polyphenols can reduce lipid-induced oxidation.

Questions/purposes: We explored whether tea polyphenol-stabilized UHMWPE would exhibit (1) lower squalene absorption; (2) stronger oxidation resistance; and (3) lower content of free radicals than vitamin E-stabilized UHMWPE under a physiologically-motivated in vitro accelerated-aging model.

Methods: Tea polyphenol (lipid-soluble epigallocatechin gallate [lsEGCG]) and vitamin E were blended with UHMWPE powders followed by compression molding and electron beam irradiation at 100 and 150 kGy. Small cubes (n = 3, 60 mg, 4 × 4 × 4 mm) cut from the blocks were doped in squalene at 60°, 80°, 100°, and 120° C for 2 hours. Gravimetric change of the cubes after squalene immersion was measured to assess absorption. Thin films (n = 3, ∼60 μm) were also microtomed from the blocks and were doped at 120° C for 24 hours. Oxidation induction time (n = 3, 5 mg of material from the cubes) and incipient oxidation temperature (n = 3, thin films) were obtained to determine the oxidation stability. Signal intensity of the free radicals, obtained by electron spin resonance spectroscopy, was used to qualitatively rank the antioxidant ability of vitamin E and lsEGCG.

Results: Squalene absorption was comparable between lsEGCG/UHMWPE and vitamin E/UHMWPE at a given temperature and radiation dose. The oxidation induction time of 100 kGy-irradiated UHMWPE was increased with lsEGCG compared with vitamin E except at 120° C. For example, the oxidation induction time value of 100 kGy-irradiated lsEGCG/UHMWPE immersed at 60 C was 25.3 minutes (24.2-27.8 minutes), which was 8.3 minutes longer than that of 100 kGy-irradiated vitamin E/UHMWPE which was 17.0 minutes (15.0-17.1 minutes) (p = 0.040). After squalene immersion at 120° C, the incipient oxidation temperature of 100 and 150 kGy irradiated lsEGCG/UHMWPE was 234° C (227-240° C) and 227° C (225-229° C), which was higher than vitamin E-stabilized counterparts with value of 217° C (214-229° C; p = 0.095) and 216° C (207-218° C; p = 0.040), respectively. The electron spin resonance signal of 150 kGy irradiated lsEGCG/UHMWPE was qualitatively weaker than that of 150 kGy irradiated vitamin E/UHMWPE.

Conclusions: lsEGCG-stabilized UHMWPE demonstrated higher oxidation resistance than vitamin E-stabilized UHMWPE after squalene immersion, likely because lsEGCG donates more protons to eliminate macroradicals than vitamin E.

Clinical Relevance: Our in vitro findings provide support that lsEGCG may be effective in protecting against oxidation that may be associated with synovial fluid-associated oxidation of highly crosslinked UHMWPE joint replacement components.

Citing Articles

CORR Insights®: High Oxidation Stability of Tea Polyphenol-stabilized Highly Crosslinked UHMWPE Under an in Vitro Aggressive Oxidative Condition.

Gomez-Barrena E Clin Orthop Relat Res. 2019; 477(8):1956-1957.

PMID: 31232732 PMC: 7000031. DOI: 10.1097/CORR.0000000000000859.

References
1.
Oral E, Ghali B, Muratoglu O . The elimination of free radicals in irradiated UHMWPEs with and without vitamin E stabilization by annealing under pressure. J Biomed Mater Res B Appl Biomater. 2011; 97(1):167-74. PMC: 3747829. DOI: 10.1002/jbm.b.31799. View

2.
Collier J, Currier B, Kennedy F, Currier J, Timmins G, Jackson S . Comparison of cross-linked polyethylene materials for orthopaedic applications. Clin Orthop Relat Res. 2003; (414):289-304. DOI: 10.1097/01.blo.0000073343.50837.03. View

3.
Puppulin L, Zhu W, Sugano N, Pezzotti G . Microstructural modifications induced by accelerated aging and lipid absorption in remelted and annealed UHMWPEs for total hip arthroplasty. J Biomater Appl. 2014; 29(6):791-800. PMC: 5207295. DOI: 10.1177/0885328214548693. View

4.
Costa L, Bracco P, del Prever E, Luda M, Trossarelli L . Analysis of products diffused into UHMWPE prosthetic components in vivo. Biomaterials. 2001; 22(4):307-15. DOI: 10.1016/s0142-9612(00)00182-4. View

5.
Ren Y, Zhang Z, Lan R, Xu L, Gao Y, Zhao B . Enhanced oxidation stability of highly cross-linked ultrahigh molecular weight polyethylene by tea polyphenols for total joint implants. Mater Sci Eng C Mater Biol Appl. 2018; 94:211-219. DOI: 10.1016/j.msec.2018.09.036. View