» Articles » PMID: 26994426

Properties, Performance and Associated Hazards of State-of-the-art Durable Water Repellent (DWR) Chemistry for Textile Finishing

Overview
Journal Environ Int
Date 2016 Mar 20
PMID 26994426
Citations 22
Authors
Affiliations
Soon will be listed here.
Abstract

Following the phase-out of long-chain per- and polyfluoroalkyl substances (PFASs), the textile industry had to find alternatives for side-chain fluorinated polymer based durable water repellent (DWR) chemistries that incorporated long perfluoroalkyl side chains. This phase-out and subsequent substitution with alternatives has resulted in a market where both fluorinated and non-fluorinated DWRs are available. These DWR alternatives can be divided into four broad groups that reflect their basic chemistry: side-chain fluorinated polymers, silicones, hydrocarbons and other chemistries (includes dendrimer and inorganic nanoparticle chemistries). In this critical review, the alternative DWRs are assessed with regards to their structural properties and connected performance, loss and degradation processes resulting in diffuse environmental emissions, and hazard profiles for selected emitted substances. Our review shows that there are large differences in performance between the alternative DWRs, most importantly the lack of oil repellence of non-fluorinated alternatives. It also shows that for all alternatives, impurities and/or degradation products of the DWR chemistries are diffusively emitted to the environment. Our hazard ranking suggests that hydrocarbon based DWR is the most environmentally benign, followed by silicone and side-chain fluorinated polymer-based DWR chemistries. Industrial commitments to reduce the levels of impurities in silicone based and side-chain fluorinated polymer based DWR formulations will lower the actual risks. There is a lack of information on the hazards associated with DWRs, in particular for the dendrimer and inorganic nanoparticle chemistries, and these data gaps must be filled. Until environmentally safe alternatives, which provide the required performance, are available our recommendation is to choose DWR chemistry on a case-by-case basis, always weighing the benefits connected to increased performance against the risks to the environment and human health.

Citing Articles

An Overview of Potential Alternatives for the Multiple Uses of Per- and Polyfluoroalkyl Substances.

Figuiere R, Miaz L, Savvidou E, Cousins I Environ Sci Technol. 2025; 59(4):2031-2042.

PMID: 39851256 PMC: 11800378. DOI: 10.1021/acs.est.4c09088.


Green Advances in Wet Finishing Methods and Nanoparticles for Daily Textiles.

Patti A Macromol Rapid Commun. 2024; 46(2):e2400636.

PMID: 39462481 PMC: 11756869. DOI: 10.1002/marc.202400636.


Prioritization, Identification, and Quantification of Emerging Contaminants in Recycled Textiles Using Non-Targeted and Suspect Screening Workflows by LC-ESI-HRMS.

Szabo D, Fischer S, Mathew A, Kruve A Anal Chem. 2024; 96(35):14150-14159.

PMID: 39160693 PMC: 11375621. DOI: 10.1021/acs.analchem.4c02041.


Toward the future of firefighter gear: Assessing fluorinated and non-fluorinated outer shells following simulated on-the-job exposures.

Mazumder N, Lu J, Hall A, Kasebi A, Girase A, Masoud F J Ind Text. 2024; 53.

PMID: 38529520 PMC: 10962281. DOI: 10.1177/15280837231217401.


One pot application of a green chemistry-based finish for cotton fabric, providing hydrophobic, flame retardant, and antimicrobial properties.

Sharif R, Qutab H, Mahmood K, Gul S, Ramzan N, Mohsin M RSC Adv. 2024; 14(9):6146-6155.

PMID: 38375009 PMC: 10875413. DOI: 10.1039/d3ra07931g.