Zhefeng Zhang
Overview
Explore the profile of Zhefeng Zhang including associated specialties, affiliations and a list of published articles.
Author names and details appear as published. Due to indexing inconsistencies, multiple individuals may share a name, and a single author may have variations. MedLuna displays this data as publicly available, without modification or verification
Snapshot
Snapshot
Articles
34
Citations
194
Followers
0
Related Specialties
Related Specialties
Top 10 Co-Authors
Top 10 Co-Authors
Published In
Affiliations
Affiliations
Soon will be listed here.
Recent Articles
1.
Qu Z, Zhang Z, Liu R, Xu L, Zhang Y, Li X, et al.
Nature
. 2025 Feb;
638(8052):E48.
PMID: 39934424
No abstract available.
2.
Wu Q, Tan B, Pang J, Shi F, Jiang A, Zou C, et al.
Materials (Basel)
. 2024 Sep;
17(17).
PMID: 39274656
Tensile and low-cycle fatigue tests of high-strength compacted graphite cast iron (CGI, RuT450) were carried out at 25 °C, 400 °C, and 500 °C, respectively. The results show that with...
3.
Qu Z, Zhang Z, Liu R, Xu L, Zhang Y, Li X, et al.
Nature
. 2024 Feb;
626(8001):999-1004.
PMID: 38418915
The advantage of 3D printing-that is, additive manufacturing (AM) of structural materials-has been severely compromised by their disappointing fatigue properties. Commonly, poor fatigue properties appear to result from the presence...
4.
Liu J, Yang H, Meng L, Liu D, Xu T, Xu D, et al.
Materials (Basel)
. 2023 Feb;
16(4).
PMID: 36837371
The hydrogen embrittlement (HE) behavior of a selective laser-melted (SLM) 316L austenitic stainless steel has been investigated by hydrogen charging experiments and slow strain rate tensile tests (SSRTs) at room...
5.
Wang M, Pang J, Liu X, Wang J, Liu Y, Li S, et al.
Materials (Basel)
. 2022 Oct;
15(20).
PMID: 36295191
The eutectic cast Al-Si alloys with excellent high-temperature and casting performance are widely used in engine pistons. During frequent starts and stops, the thermo-mechanical fatigue (TMF) is the most important...
6.
Ben D, Yang H, Gao J, Yang B, Dong Y, Liu X, et al.
Materials (Basel)
. 2022 Oct;
15(20).
PMID: 36295173
The typical microstructure of the laser melting deposition (LMD) additive-manufactured Ti-6.5Al-3.5Mo-1.5Zr-0.3Si alloy (TC11) contains the heat-affected bands (HABs), the narrow bands (NBs) and the melting pools (MPs) that formed due...
7.
Yang X, Huang W, Zhan D, Ren D, Ji H, Liu Z, et al.
Front Bioeng Biotechnol
. 2022 Jul;
10:891632.
PMID: 35837550
Orthopedic hybrid implants combining both titanium (Ti) and magnesium (Mg) have gained wide attraction nowadays. However, it still remains a huge challenge in the fabrication of Mg-Ti composites because of...
8.
Sun H, Gao K, Yi Z, Han C, Liu Z, Wang Q, et al.
Front Bioeng Biotechnol
. 2022 Jun;
10:913899.
PMID: 35677300
For clinical applications, non-cytotoxicity and good bonding property of dental restorative materials are the most essential and important. The aim of this study was to evaluate the potential for clinical...
9.
Zhang M, Zhao N, Yu Q, Liu Z, Qu R, Zhang J, et al.
Nat Commun
. 2022 Jun;
13(1):3247.
PMID: 35668100
Bioinspired architectures are effective in enhancing the mechanical properties of materials, yet are difficult to construct in metallic systems. The structure-property relationships of bioinspired metallic composites also remain unclear. Here,...
10.
Wu Y, Zhang F, Li F, Yang Y, Zhu J, Wu H, et al.
Mater Horiz
. 2021 Dec;
9(2):804-814.
PMID: 34908069
Superelasticity associated with martensitic transformation has found a broad range of engineering applications, such as in low-temperature devices in the aerospace industry. Nevertheless, the narrow working temperature range and strong...