Wojciech Zebala
Overview
Explore the profile of Wojciech Zebala including associated specialties, affiliations and a list of published articles.
Author names and details appear as published. Due to indexing inconsistencies, multiple individuals may share a name, and a single author may have variations. MedLuna displays this data as publicly available, without modification or verification
Snapshot
Snapshot
Articles
15
Citations
43
Followers
0
Top 10 Co-Authors
Top 10 Co-Authors
Published In
Published In
Affiliations
Affiliations
Soon will be listed here.
Recent Articles
1.
Machno M, Zebala W, Franczyk E
Materials (Basel)
. 2024 Dec;
17(23).
PMID: 39685445
The process of machining the modern engineering materials, such as nickel-based superalloys, still requires improvement. This paper focuses on comparing the turning process of Inconel 625 superalloy using three types...
2.
Machno M, Zebala W
Materials (Basel)
. 2024 Jun;
17(12).
PMID: 38930275
Parts made using selective laser melting (SLM) often require improvements to the quality of side surfaces. Therefore, the analysis of the machinability of metallic printed material is new/innovative. The surface...
3.
Franczyk E, Zebala W
Materials (Basel)
. 2024 May;
17(10).
PMID: 38793276
The authors present the results of laboratory tests analysing the impact of selected cutting data and tool geometry on surface quality, chip type and cutting forces in the process of...
4.
Franczyk E, Zebala W
Materials (Basel)
. 2022 Dec;
15(23).
PMID: 36499925
The formation of burrs on the edges of machined surfaces is one of the inherent problems during machining. The burrs are formed both on the tool entry surface and exit...
5.
Latosinska K, Struzikiewicz G, Zebala W
Materials (Basel)
. 2022 Feb;
15(4).
PMID: 35207989
This article focuses on the issues related to the machining of DMLS (Direct Metal Laser Sintering) laser sintered parts made of Inconel 718 alloy. Longitudinal turning with CBN (cubic boron...
6.
Machno M, Franczyk E, Bogucki R, Matras A, Zebala W
Materials (Basel)
. 2022 Feb;
15(3).
PMID: 35160647
Additive manufacturing technologies are increasingly used in the production of semi-finished workpieces intended for further processing. This entails the need to investigate the machinability and final properties of such products....
7.
Zebala W, Struzikiewicz G, Rumian K
Materials (Basel)
. 2021 Apr;
14(7).
PMID: 33810472
This article describes issues related to the machining of parts made of sintered nickel-cobalt alloy. Longitudinal turning with a CBN (cubic boron nitride) tool was analyzed. The results of experiments...
8.
Franczyk E, Machno M, Zebala W
Materials (Basel)
. 2021 Jan;
14(2).
PMID: 33467594
Presented study concerns the issue of processing the AlSi10Mg aluminum alloy with a use of WEDM technology. Two types of samples tested during the experiment were previously produced in SLM...
9.
Franczyk E, Slusarczyk L, Zebala W
Materials (Basel)
. 2020 Jul;
13(14).
PMID: 32708491
This article presents an attempt to solve the problem of the formation of burrs and drilling caps in the process of drilling in difficult-to-cut materials, specifically in the titanium alloy...
10.
Zebala W, Struzikiewicz G, Slodki B
Materials (Basel)
. 2020 Jun;
13(11).
PMID: 32531931
The paper concerns the problem of energy savings in turning of titanium alloy Ti6Al4V. Since this alloy belongs to difficult to cut materials, there is a problem with chip forming...