Dingfa Fu
Overview
Explore the profile of Dingfa Fu including associated specialties, affiliations and a list of published articles.
Author names and details appear as published. Due to indexing inconsistencies, multiple individuals may share a name, and a single author may have variations. MedLuna displays this data as publicly available, without modification or verification
Snapshot
Snapshot
Articles
10
Citations
13
Followers
0
Related Specialties
Related Specialties
Top 10 Co-Authors
Top 10 Co-Authors
Published In
Affiliations
Affiliations
Soon will be listed here.
Recent Articles
1.
Feng P, Chen S, Tang J, Liu H, Fu D, Teng J, et al.
Materials (Basel)
. 2024 Nov;
17(21).
PMID: 39517589
SiC/Al-Fe-V-Si composites exhibit complex deformation behaviors at both room and high temperatures because of the presence of SiC reinforcement particles and numerous fine dispersed Al(Fe, V)Si heat-resistant phases. In this...
2.
Chen S, Wu C, Bo G, Liu H, Tang J, Fu D, et al.
Materials (Basel)
. 2023 Sep;
16(18).
PMID: 37763570
SiC particle (SiCp) size has been found to significantly influence the hot workability of particle-reinforced aluminum matrix composites (AMC). In this work, therefore, three types of SiCp/6013 composites with different...
3.
Wu C, Chen S, Tang J, Fu D, Teng J, Jiang F
Materials (Basel)
. 2023 Jan;
16(2).
PMID: 36676532
The size and distribution of ceramic particles in aluminum matrix composites have been reported to remarkably influence their properties. For a single ceramic particle, the particle size is too small...
4.
Cui Z, He S, Tang J, Fu D, Teng J, Jiang F
Materials (Basel)
. 2022 Dec;
15(24).
PMID: 36556524
Grain size is a microscopic parameter that has a significant impact on the macroscopic deformation behavior and mechanical properties of twinning induced plasticity (TWIP) steels. In this study, Fe-18Mn-1.3Al-0.6C steel...
5.
Lu X, Zhang X, Zheng Y, Zhang D, Jiang L, Gao F, et al.
Proc Natl Acad Sci U S A
. 2022 Jun;
119(23):e2122252119.
PMID: 35658081
SignificanceThe present work might be significant for exploring advanced K-ion batteries with superb rate capability and cycle stability toward practical applications. The as-assembled K-ion half cell exhibits an excellent rate...
6.
Xu H, Li Y, Wu L, Jiang F, Fu D, Teng J, et al.
Materials (Basel)
. 2022 Apr;
15(8).
PMID: 35454505
Magnesium-rare earth (Mg-Re) alloys are very promising structural materials in lightweight industries, while the poor corrosion resistance limits their widespread application. In this work, to provide insights into the functions...
7.
Lu X, Pan X, Fang Z, Zhang D, Xu S, Wang L, et al.
ACS Appl Mater Interfaces
. 2021 Aug;
13(35):41619-41627.
PMID: 34431652
Currently, a big challenge for the practical use of potassium-ion batteries (PIBs) is their intrinsically poor cycling stability, due to the relatively large radius of K and sluggish kinetics for...
8.
Lu X, Pan X, Zhang D, Fang Z, Xu S, Ma Y, et al.
Proc Natl Acad Sci U S A
. 2021 Aug;
118(35).
PMID: 34429362
The popularly reported energy storage mechanisms of potassium-ion batteries (PIBs) are based on alloy-, de-intercalation-, and conversion-type processes, which inevitably lead to structural damage of the electrodes caused by intercalation/de-intercalation...
9.
Xu S, Jiang F, Gao F, Wang L, Teng J, Fu D, et al.
ACS Appl Mater Interfaces
. 2020 Apr;
12(18):20469-20478.
PMID: 32320197
Photoelectrochemical (PEC) splitting of water into H and O by direct use of sunlight is an ideal strategy for the production of clean and renewable energy, which fundamentally relies on...
10.
Du Z, Fu D, Teng J, Wang L, Gao F, Yang W, et al.
Small
. 2019 Nov;
15(52):e1905253.
PMID: 31769610
In the present work, the exploration of photodetectors (PDs) based on CsPbI nanotubes are reported. The as-prepared CsPbI nanotubes can be stable for more than 2 months under air conditions....