A Celzard
Overview
Explore the profile of A Celzard including associated specialties, affiliations and a list of published articles.
Author names and details appear as published. Due to indexing inconsistencies, multiple individuals may share a name, and a single author may have variations. MedLuna displays this data as publicly available, without modification or verification
Snapshot
Snapshot
Articles
15
Citations
117
Followers
0
Related Specialties
Related Specialties
Top 10 Co-Authors
Top 10 Co-Authors
Published In
Published In
Affiliations
Affiliations
Soon will be listed here.
Recent Articles
1.
Morales-Ospino R, Reinert L, Izquierdo M, Celzard A, Duclaux L, Fierro V
Environ Res
. 2025 Feb;
273:121211.
PMID: 40010425
N-doped carbon was synthesized from an N-rich precursor, chitosan, and systematically compared with materials reported in the literature to evaluate its potential for CO capture in post-combustion scenarios and biogas...
2.
Berro Y, Gueddida S, Bouizi Y, Bellouard C, Bendeif E, Gansmuller A, et al.
J Colloid Interface Sci
. 2020 Apr;
573:193-203.
PMID: 32278950
Hypothesis: One of the main drawbacks of metal-supported materials, traditionally prepared by the impregnation of metal salts onto pre-synthesized porous supports, is the formation of large and unevenly dispersed particles....
3.
Saidi M, Pasc A, El Moujahid C, Canilho N, Badawi M, Delgado-Sanchez C, et al.
J Colloid Interface Sci
. 2019 Dec;
562:91-101.
PMID: 31837623
Hypothesis: Newtonian liquids, usually used as base oil lubricants, exhibit low viscosity under extreme thermal conditions, needed for the functioning of wind turbines. This is directly affecting the colloidal stability...
4.
Borrero-Lopez A, Fierro V, Jeder A, Ouederni A, Masson E, Celzard A
Environ Sci Pollut Res Int
. 2016 Nov;
24(11):9859-9869.
PMID: 27873116
Olive stones (OS) were submitted to hydrothermal carbonisation (HTC) in order to evaluate the possibility of producing high added-value products, mainly furfural (FU) and 5-hydroxymethylfurfural (5-HMF) on one hand and...
5.
Acosta R, Fierro V, Martinez de Yuso A, Nabarlatz D, Celzard A
Chemosphere
. 2016 Feb;
149:168-76.
PMID: 26855221
Tyre pyrolysis char (TPC), produced when manufacturing pyrolysis oil from waste tyre, was used as raw material to prepare activated carbons (ACs) by KOH activation. KOH to TPC weight ratios...
6.
Braghiroli F, Fierro V, Izquierdo M, Parmentier J, Pizzi A, Celzard A
Bioresour Technol
. 2013 Nov;
151:271-7.
PMID: 24246483
Aqueous solutions of condensed tannins were submitted to hydrothermal carbonization (HTC) in a stainless steel autoclave, and the kinetics of hydrothermal carbon formation was investigated by changing several parameters: amount...
7.
Macutkevic J, Kuzhir P, Paddubskaya A, Maksimenko S, Banys J, Celzard A, et al.
J Nanosci Nanotechnol
. 2013 Jul;
13(8):5434-9.
PMID: 23882775
A set of epoxy resin composites filled with 0.25-2.0 wt.% of commercially available ENSACO carbon black (CB) of high and low surface area (CBH and CBL respectively) has been produced....
8.
Hawelek L, Woznica N, Brodka A, Fierro V, Celzard A, Bulou A, et al.
J Phys Condens Matter
. 2012 Nov;
24(49):495303.
PMID: 23148039
The structure of a series of activated carbons prepared from anthracite by chemical activation has been studied using wide-angle x-ray scattering, molecular dynamics and Raman spectroscopy. The BET surface areas...
9.
Fierro V, Muniz G, Basta A, El-Saied H, Celzard A
J Hazard Mater
. 2010 Jul;
181(1-3):27-34.
PMID: 20605677
Highly mesoporous activated carbons (ACs) with a mesopore fraction ranging from 42 to 73% were obtained by activation of rice straw (RS) with ortho-phosphoric acid (PA). Due to such a...
10.
Tondi G, Blacher S, Leonard A, Pizzi A, Fierro V, Leban J, et al.
Microsc Microanal
. 2009 Aug;
15(5):384-94.
PMID: 19709464
Tannin-based rigid foams of different bulk densities and their carbonized counterparts were investigated for the first time by X-ray microtomography. This method allowed acquisition of three-dimensional pictures of such highly...