Computer Simulation of Flagellar Movement. I. Demonstration of Stable Bend Propagation and Bend Initiation by the Sliding Filament Model

A program has been developed for digital computer simulation of the movement of a flagellar model consisting of straight segments connected by joints at which bending occurs. The program finds values for the rate of bending at each joint by solving equations which balance active, viscous, and elastic bending moments at each joint. These bending rates are then used to compute the next position of the model. Stable swimming movements, similar to real flagellar movements, can be generated routinely with a 25-segment model using 16 time steps/beat cycle. These results depend on four assumptions about internal flagellar mechanisms: (a) Bending is generated by a sliding filament process. (b) The active process is controlled locally by the curvature of the flagellum. (c) Nonlinear elastic resistances stabilize the amplitude of the movement. (d) Internal viscous resistances stabilize the wavelength of the movement and explain the relatively low sensitivity of flagellar movement to changes in external viscosity.