Effect of Combining Different 10-MDP-containing Primers and Cement Systems on Shear Bond Strength Between Resin Cement and Zirconia

Overview

Journal BMC Oral Health

Publisher Biomed Central

Date 2025 Feb 8

PMID 39923049

Authors

Kan Wongkamhaeng

Kopchai Poomparnich

Top Chitkraisorn

Kwanwong Boonpitak

Terawat Tosiriwatanapong

Affiliations

Soon will be listed here.

Abstract

Purpose: The longevity of zirconia restoration depends upon its esthetic, proper occlusion, marginal adaptation, and restoration retention. This study aimed to investigate the combination of 10-MDP-containing primers between the two commercial systems (Scotchbond Universal Plus Adhesive and Panavia V5) and airborne-particle abrasion on shear bond strength (SBS) between zirconia and resin cement.

Methods: High translucency zirconia discs were sectioned and sintered according to the manufacturer's recommendations. The specimens were randomly applied with three different primers (Scotchbond Universal Adhesive, Tooth Primer, and Clearfil Ceramic Primer). Then, each group was bonded with Panavia V5 and RelyX™ Universal resin cements. Airborne-particle abrasion on the zirconia surfaces was also conducted using the manufacturer's bonding protocol for both resin cements. SBS was analyzed by a two-way ANOVA with Tukey's adjustment for multiple comparisons (α = 0.05).

Results: Panavia V5 exhibited the highest SBS with Scotchbond Universal Adhesive (9.66±2.00 MPa) and Tooth Primer (8.47±2.08 MPa), respectively. As-sintered zirconia luted with primers and RelyX Universal resin cement exhibited lower SBS than that of Panavia V5. In regard to air-abrasion, air-abraded zirconia luted with Tooth Primer and Panavia V5 exhibited statistically significant higher SBS (29.26±3.26 MPa) than other groups (p<0.0001).

Conclusions: Combining primers from different adhesive cement systems may significantly enhance the bond strength. Zirconia luted with Scotchbond Universal Adhesive and Panavia V5 achieved the highest bond strength when combined with airborne-particle abrasion.

References

Ozcan M . Air abrasion of zirconia resin-bonded fixed dental prostheses prior to adhesive cementation: why and how?. J Adhes Dent. 2013; 15(4):394. DOI: 10.3290/j.jad.a30476. View

Tay F, Pashley D, Yiu C, Sanares A, Wei S . Factors contributing to the incompatibility between simplified-step adhesives and chemically-cured or dual-cured composites. Part I. Single-step self-etching adhesive. J Adhes Dent. 2003; 5(1):27-40. View

Wang Y, Spencer P . Continuing etching of an all-in-one adhesive in wet dentin tubules. J Dent Res. 2005; 84(4):350-4. DOI: 10.1177/154405910508400411. View

Wongkamhaeng K, Dawson D, Holloway J, Denry I . Effect of Surface Modification on In-Depth Transformations and Flexural Strength of Zirconia Ceramics. J Prosthodont. 2018; 28(1):e364-e375. PMC: 7255074. DOI: 10.1111/jopr.12908. View

Tay F, Pashley D, Yoshiyama M . Two modes of nanoleakage expression in single-step adhesives. J Dent Res. 2002; 81(7):472-6. DOI: 10.1177/154405910208100708. View

Sadek F, Pashley D, Nishitani Y, Carrilho M, Donnelly A, Ferrari M . Application of hydrophobic resin adhesives to acid-etched dentin with an alternative wet bonding technique. J Biomed Mater Res A. 2007; 84(1):19-29. DOI: 10.1002/jbm.a.31290. View

Jin X, Yuan X, Chen K, Xie H, Chen C . Role of 3-Methacryloxypropyltrimethoxysilane in Dentin Bonding. ACS Omega. 2022; 7(18):15892-15900. PMC: 9096984. DOI: 10.1021/acsomega.2c01000. View

De Souza G, Hennig D, Aggarwal A, Tam L . The use of MDP-based materials for bonding to zirconia. J Prosthet Dent. 2014; 112(4):895-902. DOI: 10.1016/j.prosdent.2014.01.016. View

Le M, Larsson C, Papia E . Bond strength between MDP-based cement and translucent zirconia. Dent Mater J. 2019; 38(3):480-489. DOI: 10.4012/dmj.2018-194. View

10.

Perdigao J, Araujo E, Ramos R, Gomes G, Pizzolotto L . Adhesive dentistry: Current concepts and clinical considerations. J Esthet Restor Dent. 2020; 33(1):51-68. DOI: 10.1111/jerd.12692. View

11.

Romanyk D, Yu H, Grotski M, Seo S, Addison O, Dennison C . In situ measurement of dental resin-based composite volumetric shrinkage and temperature effects using in-fibre bragg grating methods. J Mech Behav Biomed Mater. 2019; 95:89-95. DOI: 10.1016/j.jmbbm.2019.03.026. View

12.

Spencer P, Wang Y . Adhesive phase separation at the dentin interface under wet bonding conditions. J Biomed Mater Res. 2002; 62(3):447-56. DOI: 10.1002/jbm.10364. View

13.

Re D, Augusti D, Sailer I, Spreafico D, Cerutti A . The effect of surface treatment on the adhesion of resin cements to Y-TZP. Eur J Esthet Dent. 2009; 3(2):186-96. View

14.

Comino-Garayoa R, Pelaez J, Tobar C, Rodriguez V, Suarez M . Adhesion to Zirconia: A Systematic Review of Surface Pretreatments and Resin Cements. Materials (Basel). 2021; 14(11). PMC: 8196946. DOI: 10.3390/ma14112751. View

15.

Sharafeddin F, Shoale S . Effects of Universal and Conventional MDP Primers on the Shear Bond Strength of Zirconia Ceramic and Nanofilled Composite Resin. J Dent (Shiraz). 2018; 19(1):48-56. PMC: 5817343. View

16.

Prause E, Hey J, Sterzenbach G, Beuer F, Adali U . Survival and success of veneered zirconia crowns. Int J Comput Dent. 2023; 26(3):247-255. DOI: 10.3290/j.ijcd.b3796761. View

17.

Van Meerbeek B, Yoshihara K, van Landuyt K, Yoshida Y, Peumans M . From Buonocore's Pioneering Acid-Etch Technique to Self-Adhering Restoratives. A Status Perspective of Rapidly Advancing Dental Adhesive Technology. J Adhes Dent. 2020; 22(1):7-34. DOI: 10.3290/j.jad.a43994. View

18.

Kern M . Bonding to oxide ceramics—laboratory testing versus clinical outcome. Dent Mater. 2014; 31(1):8-14. DOI: 10.1016/j.dental.2014.06.007. View

19.

Van Landuyt K, Snauwaert J, Peumans M, De Munck J, Lambrechts P, Van Meerbeek B . The role of HEMA in one-step self-etch adhesives. Dent Mater. 2008; 24(10):1412-9. DOI: 10.1016/j.dental.2008.02.018. View

20.

Elsaka S . Optical and Mechanical Properties of Newly Developed Monolithic Multilayer Zirconia. J Prosthodont. 2017; 28(1):e279-e284. DOI: 10.1111/jopr.12730. View