Landau-Levich Scaling for Optimization of Quantum Dot Layer Morphology and Thickness in Quantum-Dot Light-Emitting Diodes

Overview

Journal ACS Nano

Publisher American Chemical Society

Date 2025 Jan 29

PMID 39879316

Authors

Yiman Xu

Grant J Dixon

Qing Xie

James F Gilchrist

Brandi M Cossairt

David S Ginger

Elsa Reichmanis

Affiliations

Soon will be listed here.

Abstract

Quantum dot (QD) light-emitting diodes (QLEDs) are promising candidates for next-generation displays because of their high efficiency, brightness, broad color gamut, and solution-processability. Large-scale solution-processing of electroluminescent QLEDs poses significant challenges, particularly concerning the precise control of the active layer's thickness and uniformity. These obstacles directly impact charge transport, leading to current leakage and reduced overall efficiency. Blade-coating is a prevalent and scalable solution processing technique known for its speed and minimal waste. Additionally, it allows for continuous "roll-to-roll" processing, making it highly adaptable in various applications. In this study, we demonstrate the precise control of blade speed in the Landau-Levich regime to create a uniform QD emission layer, using a commercial CdSe/ZnS QD as a representative example. QDs assemble into different morphologies on glass and the underlying layers of the QLED device due to variations in interaction energy. The QD film thickness can be modified from monolayer to multilayer by adjusting blade speed, which can be predicted by fitting the Landau-Levich-Derjaguin theory. The optimal speed at 7 mm/s results in a QD film with a surface coverage of around 163% and low roughness (1.57 nm mean square height). The QLED external quantum efficiency (EQE) of approximately 1.5% was achieved using commercially available CdSe/ZnS QDs with low photoluminescence quantum yield (PLQY), and an EQE of around 7% has been obtained using lab-made InP/ZnSe/ZnS QDs having a solution PLQY of 74%. All-blade-coated CdSe-QLEDs are further demonstrated by adopting the optimized speed for the QD layer. This method demonstrates significant potential for developing low-cost, reproducible, and scalable QLED technologies with uniform emission characteristics and low-waste production.

References

Chuang C, Brown P, Bulovic V, Bawendi M . Improved performance and stability in quantum dot solar cells through band alignment engineering. Nat Mater. 2014; 13(8):796-801. PMC: 4110173. DOI: 10.1038/nmat3984. View

Zeng Q, Xu Z, Zheng C, Liu Y, Chen W, Guo T . Improving Charge Injection via a Blade-Coating Molybdenum Oxide Layer: Toward High-Performance Large-Area Quantum-Dot Light-Emitting Diodes. ACS Appl Mater Interfaces. 2018; 10(9):8258-8264. DOI: 10.1021/acsami.7b19333. View

Xiang C, Wu L, Lu Z, Li M, Wen Y, Yang Y . High efficiency and stability of ink-jet printed quantum dot light emitting diodes. Nat Commun. 2020; 11(1):1646. PMC: 7118149. DOI: 10.1038/s41467-020-15481-9. View

Roh J, Park Y, Lim J, Klimov V . Optically pumped colloidal-quantum-dot lasing in LED-like devices with an integrated optical cavity. Nat Commun. 2020; 11(1):271. PMC: 6959307. DOI: 10.1038/s41467-019-14014-3. View

Gans A, Dressaire E, Colnet B, Saingier G, Bazant M, Sauret A . Dip-coating of suspensions. Soft Matter. 2018; 15(2):252-261. DOI: 10.1039/c8sm01785a. View

Pandey A, Scheel J, Schumacher J . Turbulent superstructures in Rayleigh-Bénard convection. Nat Commun. 2018; 9(1):2118. PMC: 5974373. DOI: 10.1038/s41467-018-04478-0. View

Lim J, Park Y, Klimov V . Optical gain in colloidal quantum dots achieved with direct-current electrical pumping. Nat Mater. 2017; 17(1):42-49. DOI: 10.1038/nmat5011. View

Yu H, Zhang J, Long T, Xu M, Feng H, Zhang L . Efficient All-Blade-Coated Quantum Dot Light-Emitting Diodes through Solvent Engineering. J Phys Chem Lett. 2020; 11(21):9019-9025. DOI: 10.1021/acs.jpclett.0c02419. View

Colosqui C, Morris J, Stone H . Hydrodynamically driven colloidal assembly in dip coating. Phys Rev Lett. 2013; 110(18):188302. DOI: 10.1103/PhysRevLett.110.188302. View

10.

Lee T, Kim B, Lee H, Hahm D, Bae W, Lim J . Bright and Stable Quantum Dot Light-Emitting Diodes. Adv Mater. 2021; 34(4):e2106276. DOI: 10.1002/adma.202106276. View

11.

Weerasinghe H, Macadam N, Kim J, Sutherland L, Angmo D, Ng L . The first demonstration of entirely roll-to-roll fabricated perovskite solar cell modules under ambient room conditions. Nat Commun. 2024; 15(1):1656. PMC: 10933357. DOI: 10.1038/s41467-024-46016-1. View

12.

Junisu B, Sun Y . Hierarchical Surface Instability in Polymer Films. Langmuir. 2023; 39(43):15249-15259. DOI: 10.1021/acs.langmuir.3c01936. View

13.

Chrzanowski M, Zatryb G, Sitarek P, Podhorodecki A . Effect of Air Exposure of ZnMgO Nanoparticle Electron Transport Layer on Efficiency of Quantum-Dot Light-Emitting Diodes. ACS Appl Mater Interfaces. 2021; 13(17):20305-20312. PMC: 8288913. DOI: 10.1021/acsami.1c01898. View

14.

Yang Y, Qin H, Jiang M, Lin L, Fu T, Dai X . Entropic Ligands for Nanocrystals: From Unexpected Solution Properties to Outstanding Processability. Nano Lett. 2016; 16(4):2133-8. DOI: 10.1021/acs.nanolett.6b00730. View

15.

Gu X, Shaw L, Gu K, Toney M, Bao Z . The meniscus-guided deposition of semiconducting polymers. Nat Commun. 2018; 9(1):534. PMC: 5803241. DOI: 10.1038/s41467-018-02833-9. View

16.

Biondi M, Choi M, Ouellette O, Baek S, Todorovic P, Sun B . A Chemically Orthogonal Hole Transport Layer for Efficient Colloidal Quantum Dot Solar Cells. Adv Mater. 2020; 32(17):e1906199. DOI: 10.1002/adma.201906199. View

17.

Li M, Li R, Wu L, Lin X, Xia X, Ao Z . Ultrabright and stable top-emitting quantum-dot light-emitting diodes with negligible angular color shift. Nat Commun. 2024; 15(1):5161. PMC: 11183122. DOI: 10.1038/s41467-024-49574-6. View

18.

Shi G, Huang Z, Qiao R, Chen W, Li Z, Li Y . Manipulating solvent fluidic dynamics for large-area perovskite film-formation and white light-emitting diodes. Nat Commun. 2024; 15(1):1066. PMC: 10844237. DOI: 10.1038/s41467-024-45488-5. View

19.

Nguyen H, Dixon G, Dou F, Gallagher S, Gibbs S, Ladd D . Design Rules for Obtaining Narrow Luminescence from Semiconductors Made in Solution. Chem Rev. 2023; 123(12):7890-7952. DOI: 10.1021/acs.chemrev.3c00097. View

20.

Malaquin L, Kraus T, Schmid H, Delamarche E, Wolf H . Controlled particle placement through convective and capillary assembly. Langmuir. 2007; 23(23):11513-21. DOI: 10.1021/la700852c. View