» Articles » PMID: 39341877

Comparison of the Natural and Surfactant-modified Zeolites in the Adsorption Efficiency of Sunset Yellow Food Dye from Aqueous Solutions

Overview
Journal Sci Rep
Specialty Science
Date 2024 Sep 28
PMID 39341877
Authors
Affiliations
Soon will be listed here.
Abstract

The removal of Sunset Yellow (E110) on natural zeolite and zeolite modified with the cationic surfactant cetyl pyridinium chloride (CPC) was studied using the adsorption method. The structural characteristics of the surfactant-modified zeolite (SMZ-CPC) were investigated using X-ray diffraction(XRD), Fourier transform infrared spectroscopy (FTIR), Brunauer-Emmett-Teller (BET) analysis, and the scanning electron microscopy (SEM) images. The effect of different parameters on the adsorption process, such as equilibration time and amount of adsorbent at 298 K, were determined using UV-Vis spectroscopy. The maximum dye removal percentage on SMZ-CPC was obtained with 0.08 g of adsorbent in 30 min. The results show that the zeolite modified with CPC surfactant (SMZ) has a higher adsorption capacity for Sunset Yellow than the unmodified zeolite (natural form). The experimental adsorption data were nonlinearly analyzed using isotherm equations such as Langmuir, Freundlich, Temkin, Langmuir-Freundlich (or Sips), and Extended Langmuir (EL). The experimental data were better fitted with the Sips isotherm. The adsorption kinetic data were analyzed using eight models in nonlinear forms: the pseudo-first-order (PFO), pseudo-second-order (PSO), integrated kinetic Langmuir (IKL), Elovich, intraparticle diffusion (IPD), mixed order rate equation (MOE), fractal-like pseudo-first-order (FL-PFO) and fractal-like pseudo-second-order (FL-PSO). According to the results of the coefficient of determination (R), Elovich kinetic model well expressed E110 adsorption onto SMZ-CPC. Most of the dye removal takes place in less than 5 min and the maximum adsorption capacity is 5.06 mg/g. The results of this study show that zeolite modified with cationic surfactant is an effective adsorbent for removal anionic dyes from an aqueous solution.

References
1.
Noormohamadi H, Fathi M, Ghaedi M . Fabrication of polyethyleneimine modified cobalt ferrite as a new magnetic sorbent for the micro-solid phase extraction of tartrazine from food and water samples. J Colloid Interface Sci. 2018; 531:343-351. DOI: 10.1016/j.jcis.2018.07.026. View

2.
Senila M, Cadar O . Modification of natural zeolites and their applications for heavy metal removal from polluted environments: Challenges, recent advances, and perspectives. Heliyon. 2024; 10(3):e25303. PMC: 10862511. DOI: 10.1016/j.heliyon.2024.e25303. View

3.
Barakan S, Aghazadeh V . The advantages of clay mineral modification methods for enhancing adsorption efficiency in wastewater treatment: a review. Environ Sci Pollut Res Int. 2020; 28(3):2572-2599. DOI: 10.1007/s11356-020-10985-9. View

4.
Roosta M, Ghaedi M, Daneshfar A, Darafarin S, Sahraei R, Purkait M . Simultaneous ultrasound-assisted removal of sunset yellow and erythrosine by ZnS:Ni nanoparticles loaded on activated carbon: optimization by central composite design. Ultrason Sonochem. 2014; 21(4):1441-50. DOI: 10.1016/j.ultsonch.2014.01.018. View

5.
Litefti K, Freire M, Stitou M, Gonzalez-Alvarez J . Adsorption of an anionic dye (Congo red) from aqueous solutions by pine bark. Sci Rep. 2019; 9(1):16530. PMC: 6848209. DOI: 10.1038/s41598-019-53046-z. View