» Articles » PMID: 39184473

Microwave Absorption Performance of Flexible Porous PVDF-MWCNT Foam in the X-Band Frequency Range

Overview
Journal ACS Omega
Specialty Chemistry
Date 2024 Aug 26
PMID 39184473
Authors
Affiliations
Soon will be listed here.
Abstract

Lightweight electromagnetic absorbers made of polymers and multiwall carbon nanotubes (MWCNTs) have attracted a lot of attention because of their potential to shield next-generation electronics devices from electromagnetic radiation without reflecting it back into space. In this research, a flexible foam composed of MWCNTs and polyvinylidene fluoride (PVDF) is developed. This foam is designed to be an electromagnetic shielding material that is both flexible and absorption-dominant, reducing electromagnetic interference. The solvent approach is used to fabricate the PVDF-MWCNT foam. It is discovered that the foam has a porosity of 88.9%. Each cell in the PVDF-MWCNT foam is formed in a porous layered manner. The foam demonstrates a dielectric constant (ϵ ) of around 7.19 and dielectric loss (ϵ ) of 4.46 at 9.96 GHz as calculated from MATLAB using the Nicolson-Ross-Wire algorithm. This developed EM absorber exhibits a high shielding efficiency of 78.46 dB. With an ideal reflection loss of -26.5 dB, this absorber attains the desired outcomes. The electromagnetic shielding performance is supported by calculations of the impedance matching degree, which was found to be 0.54. The PVDF-MWCNT foam displayed absorption-dominant characteristics, with a significantly low shielding due to reflection. This newly developed foam EM absorber has proven itself capable in a variety of commercial and stealth-related applications.

References
1.
Sun H, Che R, You X, Jiang Y, Yang Z, Deng J . Cross-stacking aligned carbon-nanotube films to tune microwave absorption frequencies and increase absorption intensities. Adv Mater. 2014; 26(48):8120-5. DOI: 10.1002/adma.201403735. View

2.
Yuan Y, Ding Y, Wang C, Xu F, Lin Z, Qin Y . Multifunctional Stiff Carbon Foam Derived from Bread. ACS Appl Mater Interfaces. 2016; 8(26):16852-61. DOI: 10.1021/acsami.6b03985. View

3.
Chaudhary A, Kumari S, Kumar R, Teotia S, Singh B, Singh A . Lightweight and Easily Foldable MCMB-MWCNTs Composite Paper with Exceptional Electromagnetic Interference Shielding. ACS Appl Mater Interfaces. 2016; 8(16):10600-8. DOI: 10.1021/acsami.5b12334. View

4.
Zhang L, Liu M, Roy S, Chu E, See K, Hu X . Phthalonitrile-Based Carbon Foam with High Specific Mechanical Strength and Superior Electromagnetic Interference Shielding Performance. ACS Appl Mater Interfaces. 2016; 8(11):7422-30. DOI: 10.1021/acsami.5b12072. View

5.
Shukla V . Review of electromagnetic interference shielding materials fabricated by iron ingredients. Nanoscale Adv. 2022; 1(5):1640-1671. PMC: 9417679. DOI: 10.1039/c9na00108e. View