Achieving High Efficiency and Stability in Organic Photovoltaics with a Nanometer-Scale Twin P-i-n Structured Active Layer

Overview

Journal ACS Appl Mater Interfaces

Publisher American Chemical Society

Specialties Biomedical Engineering
Biotechnology

Date 2024 Jul 23

PMID 39041930

Authors

Bin Chang

Bing-Huang Jiang

Chih-Ping Chen

Kai Chen

Bo-Han Chen

Shaun Tan

Tzu-Ching Lu

Cheng-Si Tsao

Yu-Wei Su

Shang-Da Yang

Cheng-Sheng Chen

Kung-Hwa Wei

Affiliations

Soon will be listed here.

Abstract

In pursuing high stability and power conversion efficiency for organic photovoltaics (OPVs), a sequential deposition (SD) approach to fabricate active layers with p-i-n structures (where p, i, and n represent the electron donor, mixed donor:acceptor, and electron acceptor regions, respectively, distinctively different from the bulk heterojunction (BHJ) structure) has emerged. Here, we present a novel approach that by incorporating two polymer donors, and , and one small-molecule acceptor, , into the active layer with sequential deposition, we formed a device with nanometer-scale twin p-i-n structured active layer. The twin p-i-n device involved first depositing a blend under layer and then a top layer and exhibited an improved power conversion efficiency (PCE) value of 18.6%, as compared to the 16.4% for the control BHJ device or 16.6% for the single p-i-n device. The PCE enhancement resulted mainly from the twin p-i-n active layer's multiple nanoscale charge carrier pathways that contributed to an improved fill factor and faster photocurrent generation based on transient absorption studies. The film possessed a vertical twin p-i-n morphology that was revealed through secondary ion mass spectrometry and synchrotron grazing-incidence small-angle X-ray scattering analyses. The thermal stability () at 85 °C of the twin p-i-n device surpassed that of the single p-i-n devices (906 vs 196 h). This approach of providing a twin p-i-n structure in the active layer can lead to substantial enhancements in both the PCE and stability of organic photovoltaics, laying a solid foundation for future commercialization of the organic photovoltaics technology.

References

Cheng P, Wang J, Zhang Q, Huang W, Zhu J, Wang R . Unique Energy Alignments of a Ternary Material System toward High-Performance Organic Photovoltaics. Adv Mater. 2018; 30(28):e1801501. DOI: 10.1002/adma.201801501. View

Wang Y, Price M, Bobba R, Lu H, Xue J, Wang Y . Quasi-Homojunction Organic Nonfullerene Photovoltaics Featuring Fundamentals Distinct from Bulk Heterojunctions. Adv Mater. 2022; 34(50):e2206717. DOI: 10.1002/adma.202206717. View

Liu K, Jiang Y, Liu F, Ran G, Huang F, Wang W . Organic Solar Cells with Over 19% Efficiency Enabled by a 2D-Conjugated Non-Fullerene Acceptor Featuring Favorable Electronic and Aggregation Structures. Adv Mater. 2023; 35(32):e2300363. DOI: 10.1002/adma.202300363. View

Lu H, Chen K, Bobba R, Shi J, Li M, Wang Y . Simultaneously Enhancing Exciton/Charge Transport in Organic Solar Cells by an Organoboron Additive. Adv Mater. 2022; 34(42):e2205926. DOI: 10.1002/adma.202205926. View

Chen C, Tsao C, Huang Y, Liu H, Chiu W, Chuang C . Mechanism and control of the structural evolution of a polymer solar cell from a bulk heterojunction to a thermally unstable hierarchical structure. Nanoscale. 2013; 5(16):7629-38. DOI: 10.1039/c3nr00864a. View

Fu Y, Lee T, Chin Y, Pacalaj R, Labanti C, Park S . Molecular orientation-dependent energetic shifts in solution-processed non-fullerene acceptors and their impact on organic photovoltaic performance. Nat Commun. 2023; 14(1):1870. PMC: 10073232. DOI: 10.1038/s41467-023-37234-0. View

Chang B, Cheng H, Lin Y, Wang H, Chen C, Nguyen V . Incorporating Indium Selenide Nanosheets into a Polymer/Small Molecule Binary Blend Active Layer Enhances the Long-Term Stability and Performance of Its Organic Photovoltaics. ACS Appl Mater Interfaces. 2020; 12(49):55023-55032. DOI: 10.1021/acsami.0c14461. View

Ma X, Xu W, Liu Z, Jeong S, Xu C, Zhang J . Over 18.1% Efficiency of Layer-by-Layer Polymer Solar Cells by Enhancing Exciton Utilization near the ITO Electrode. ACS Appl Mater Interfaces. 2023; 15(5):7247-7254. DOI: 10.1021/acsami.2c22461. View

Cheng H, Mohapatra A, Chang Y, Liao C, Hsiao Y, Chen C . High-Performance Organic Solar Cells Featuring Double Bulk Heterojunction Structures with Vertical-Gradient Selenium Heterocyclic Nonfullerene Acceptor Concentrations. ACS Appl Mater Interfaces. 2021; 13(23):27227-27236. DOI: 10.1021/acsami.1c06762. View

10.

Chandrabose S, Chen K, Barker A, Sutton J, Prasad S, Zhu J . High Exciton Diffusion Coefficients in Fused Ring Electron Acceptor Films. J Am Chem Soc. 2019; 141(17):6922-6929. DOI: 10.1021/jacs.8b12982. View

11.

Mishra A, Sharma G . Harnessing the Structure-Performance Relationships in Designing Non-Fused Ring Acceptors for Organic Solar Cells. Angew Chem Int Ed Engl. 2023; 62(21):e202219245. DOI: 10.1002/anie.202219245. View

12.

Sun C, Pan F, Bin H, Zhang J, Xue L, Qiu B . A low cost and high performance polymer donor material for polymer solar cells. Nat Commun. 2018; 9(1):743. PMC: 5821836. DOI: 10.1038/s41467-018-03207-x. View

13.

Jia Z, Ma Q, Chen Z, Meng L, Jain N, Angunawela I . Near-infrared absorbing acceptor with suppressed triplet exciton generation enabling high performance tandem organic solar cells. Nat Commun. 2023; 14(1):1236. PMC: 9985646. DOI: 10.1038/s41467-023-36917-y. View

14.

Kranthiraja K, Saeki A . Machine Learning-Assisted Polymer Design for Improving the Performance of Non-Fullerene Organic Solar Cells. ACS Appl Mater Interfaces. 2022; 14(25):28936-28944. DOI: 10.1021/acsami.2c06077. View

15.

Zhan L, Li S, Xia X, Li Y, Lu X, Zuo L . Layer-by-Layer Processed Ternary Organic Photovoltaics with Efficiency over 18. Adv Mater. 2021; 33(12):e2007231. DOI: 10.1002/adma.202007231. View

16.

Cai G, Chen Z, Xia X, Li Y, Wang J, Liu H . Pushing the Efficiency of High Open-Circuit Voltage Binary Organic Solar Cells by Vertical Morphology Tuning. Adv Sci (Weinh). 2022; 9(14):e2200578. PMC: 9108622. DOI: 10.1002/advs.202200578. View

17.

Yu H, Wang Y, Kim H, Wu X, Li Y, Yao Z . A Vinylene-Linker-Based Polymer Acceptor Featuring a Coplanar and Rigid Molecular Conformation Enables High-Performance All-Polymer Solar Cells with Over 17% Efficiency. Adv Mater. 2022; 34(27):e2200361. DOI: 10.1002/adma.202200361. View

18.

Zhao Y, Cheng P, Yang H, Wang M, Meng D, Zhu Y . Towards High-Performance Semitransparent Organic Photovoltaics: Dual-Functional -Type Soft Interlayer. ACS Nano. 2021; 16(1):1231-1238. DOI: 10.1021/acsnano.1c09018. View

19.

Wei Y, Chen Z, Lu G, Yu N, Li C, Gao J . Binary Organic Solar Cells Breaking 19% via Manipulating the Vertical Component Distribution. Adv Mater. 2022; 34(33):e2204718. DOI: 10.1002/adma.202204718. View

20.

Zhang Y, Cai G, Li Y, Zhang Z, Li T, Zuo X . An Electron Acceptor Analogue for Lowering Trap Density in Organic Solar Cells. Adv Mater. 2021; 33(14):e2008134. DOI: 10.1002/adma.202008134. View