Quantitative Analysis of Morphology and Surface Properties of Poly(lactic Acid)/Poly(ε-caprolactone)/Hydrophilic Nano-Silica Blends

Overview

Journal Polymers (Basel)

Publisher MDPI

Date 2024 Jun 27

PMID 38932088

Authors

Sanja Mahovic Poljacek

Dino Priselac

Tamara Tomasegovic

Mirela Leskovac

Ales Soster

Urska Stankovic Elesini

Affiliations

Soon will be listed here.

Abstract

A quantitative analysis of the morphology, as well as an analysis of the distribution of components and surface/interfacial properties in poly(lactic acid)(PLA) InegoTM 3251D, poly(ε-caprolactone) (PCL) Capa 6800 and nano-silica (SiO) Aerosil200 blends, was conducted in this research. The study aimed to improve the understanding of how PLA, PCL, and nano-SiO interact, resulting in the specific morphology and surface properties of the blends. Samples were produced by varying the concentration of all three components. They were analyzed using SEM, EDS mapping, water contact angle measurements, surface free energy calculation, adhesion parameter measurements, and FTIR-ATR spectroscopy. The results showed that the addition of SiO nanoparticles led to an increase in the contact angle of water, making the surface more hydrophobic. SEM images of the blends showed that increasing the PCL content reduced the size of spherical PCL elements in the blends. FTIR-ATR analysis showed that SiO nanoparticles influenced the structure ordering of PLA in the blend with equal portions of PLA and PCL. In the samples with a higher PCL content, the spherical elements present in the samples with a higher PLA/PCL ratio have been reduced, indicating better interactions at the interface between PLA, PCL, and SiO. SEM-EDS mapping of the PLA/PCL 100/0 blend surfaces revealed the presence of SiO clusters and the silicon (Si) concentration reaching up to ten times higher than the nominal concentration of SiO. However, with the addition of 3% SiO to the blend containing PCL, the structure became more granular. Specifically, Si protrusions in the sample PLA/PCL 90/10 with 3% SiO displayed 29.25% of Si, and the sample PLA/PCL 70/30 with 3% SiO displayed an average of 10.61% of Si at the protrusion locations. The results confirmed the affinity of SiO to be encapsulated by PCL. A better understanding of the interactions between the materials in the presented blends and the quantitative analysis of their morphology could improve the understanding of their properties and allow the optimization of their application for different purposes.

References

Mina Hernandez J . Effect of the Incorporation of Polycaprolactone (PCL) on the Retrogradation of Binary Blends with Cassava Thermoplastic Starch (TPS). Polymers (Basel). 2020; 13(1). PMC: 7796009. DOI: 10.3390/polym13010038. View

Tokiwa Y, Calabia B, Ugwu C, Aiba S . Biodegradability of plastics. Int J Mol Sci. 2009; 10(9):3722-3742. PMC: 2769161. DOI: 10.3390/ijms10093722. View

Mahovic Poljacek S, Priselac D, Tomasegovic T, Stankovic Elesini U, Leskovsek M, Leskovac M . Effect of the Addition of Nano-Silica and Poly(ε-caprolactone) on the Mechanical and Thermal Properties of Poly(lactic acid) Blends and Possible Application in Embossing Process. Polymers (Basel). 2022; 14(22). PMC: 9693381. DOI: 10.3390/polym14224861. View

Przybysz-Romatowska M, Haponiuk J, Formela K . Poly(ε-Caprolactone)/Poly(Lactic Acid) Blends Compatibilized by Peroxide Initiators: Comparison of Two Strategies. Polymers (Basel). 2020; 12(1). PMC: 7023668. DOI: 10.3390/polym12010228. View

Leroy A, Ribeiro S, Grossiord C, Alves A, Vestberg R, Salles V . FTIR microscopy contribution for comprehension of degradation mechanisms in PLA-based implantable medical devices. J Mater Sci Mater Med. 2017; 28(6):87. DOI: 10.1007/s10856-017-5894-7. View

Swetha T, Bora A, Mohanrasu K, Balaji P, Raja R, Ponnuchamy K . A comprehensive review on polylactic acid (PLA) - Synthesis, processing and application in food packaging. Int J Biol Macromol. 2023; 234:123715. DOI: 10.1016/j.ijbiomac.2023.123715. View

Moldovan A, Cuc S, Prodan D, Rusu M, Popa D, Taut A . Development and Characterization of Polylactic Acid (PLA)-Based Nanocomposites Used for Food Packaging. Polymers (Basel). 2023; 15(13). PMC: 10346334. DOI: 10.3390/polym15132855. View

Deng L, Fan S, Zhang Y, Huang Z, Zhou H, Jiang S . Multiscale Modeling and Simulation of Polymer Blends in Injection Molding: A Review. Polymers (Basel). 2021; 13(21). PMC: 8588530. DOI: 10.3390/polym13213783. View

Vyavahare O, Ng D, Hsu S . Analysis of structural rearrangements of poly(lactic acid) in the presence of water. J Phys Chem B. 2014; 118(15):4185-93. DOI: 10.1021/jp500219j. View

10.

Khairutdinov V, Khabriev I, Gumerov F, Khuzakhanov R, Garipov R, Yarullin L . Blending of the Thermodynamically Incompatible Polyvinyl Chloride and High-Pressure Polyethylene Polymers Using a Supercritical Fluid Anti-Solvent Method (SEDS) Dispersion Process. Polymers (Basel). 2023; 15(9). PMC: 10180643. DOI: 10.3390/polym15091986. View

11.

Hassanali A, Singer S . Model for the water-amorphous silica interface: the undissociated surface. J Phys Chem B. 2007; 111(38):11181-93. DOI: 10.1021/jp062971s. View

12.

Shao L, Xi Y, Weng Y . Recent Advances in PLA-Based Antibacterial Food Packaging and Its Applications. Molecules. 2022; 27(18). PMC: 9502505. DOI: 10.3390/molecules27185953. View

13.

Ashfaq A, Clochard M, Coqueret X, Dispenza C, Driscoll M, Ulanski P . Polymerization Reactions and Modifications of Polymers by Ionizing Radiation. Polymers (Basel). 2020; 12(12). PMC: 7760743. DOI: 10.3390/polym12122877. View

14.

Cyran J, Donovan M, Vollmer D, Brigiano F, Pezzotti S, Galimberti D . Molecular hydrophobicity at a macroscopically hydrophilic surface. Proc Natl Acad Sci U S A. 2019; 116(5):1520-1525. PMC: 6358674. DOI: 10.1073/pnas.1819000116. View

15.

Guchait A, Saxena A, Chattopadhyay S, Mondal T . Influence of Nanofillers on Adhesion Properties of Polymeric Composites. ACS Omega. 2022; 7(5):3844-3859. PMC: 8829956. DOI: 10.1021/acsomega.1c05448. View

16.

Vieweger D, Diel S, Schweiger H, Tetzlaff U . Mechanical Properties of Raw Filaments and Printed Specimens: Effects of Fiber Reinforcements and Process Parameters. Polymers (Basel). 2024; 16(11). PMC: 11175037. DOI: 10.3390/polym16111576. View

17.

Purohit P, Bhatt A, Mittal R, Abdellattif M, Farghaly T . Polymer Grafting and its chemical reactions. Front Bioeng Biotechnol. 2023; 10:1044927. PMC: 9874337. DOI: 10.3389/fbioe.2022.1044927. View

18.

Opaprakasit P, Opaprakasit M, Tangboriboonrat P . Crystallization of polylactide and its stereocomplex investigated by two-dimensional fourier transform infrared correlation spectroscopy employing carbonyl overtones. Appl Spectrosc. 2008; 61(12):1352-8. DOI: 10.1366/000370207783292235. View

19.

Priselac D, Mahovic Poljacek S, Tomasegovic T, Leskovac M . Blends Based on Poly(ε-Caprolactone) with Addition of Poly(Lactic Acid) and Coconut Fibers: Thermal Analysis, Ageing Behavior and Application for Embossing Process. Polymers (Basel). 2022; 14(9). PMC: 9102015. DOI: 10.3390/polym14091792. View

20.

Yoshikawa I, Hikima Y, Ohshima M . In-Line Chemical Composition Monitoring for the Injection Molding Process of Biodegradable Polymer Blends Using Simultaneous Measurement of Near-Infrared Diffuse Reflectance and Transmission Spectra. Appl Spectrosc. 2024; 78(9):933-941. DOI: 10.1177/00037028241247823. View