» Articles » PMID: 38920889

Effect of Different Primers on the Shear Bond Strength of Orthodontic Brackets Bonded to Reinforced Polyetheretherketone (PEEK) Substrate

Overview
Journal Dent J (Basel)
Specialty Dentistry
Date 2024 Jun 26
PMID 38920889
Authors
Affiliations
Soon will be listed here.
Abstract

This in vitro study assessed the effect of different primers on the shear bond strength (SBS) and adhesive remnant index (ARI) of orthodontic brackets bonded to reinforced polyetheretherketone (PEEK) substrate. A total of 40 specimens were randomly distributed to two groups based on the primer used for orthodontic bonding: group 1 (control)-Transbond XT adhesive with Visio.link primer and group 2 (test)-orthodontic adhesive (Transbond XT) with traditional orthodontic primer. After bonding, specimens were thermocycled followed by SBS testing and ARI scoring of debonded specimens. Data were analyzed using the unpaired independent -test and the Chi-square test. Group 1 specimens showed significantly higher SBS values (21.38 ± 1.48 MPa) compared to group 2 specimens (18.63 ± 1.29 MPa) ( < 0.0001). Adhesive remnant index scores showed no significant variations in bond failure modes and distributions between groups. The SBS obtained by the tested primers exceeded the clinically recommended value. Consequently, there is a comparable clinical application for both tested primers in orthodontic bonding, especially the traditional orthodontic primer, where the availability of Visio.link in clinical practice is not ensured.

References
1.
Benli M, Eker-Gumus B, Kahraman Y, Huck O, Ozcan M . Can polylactic acid be a CAD/CAM material for provisional crown restorations in terms of fit and fracture strength?. Dent Mater J. 2021; 40(3):772-780. DOI: 10.4012/dmj.2020-232. View

2.
Rambhia S, Heshmati R, Dhuru V, Iacopino A . Shear bond strength of orthodontic brackets bonded to provisional crown materials utilizing two different adhesives. Angle Orthod. 2009; 79(4):784-9. DOI: 10.2319/060908-298.1. View

3.
Morales K, Garces G, Yagnam S, Bustos V, Belfus J, Rojas V . Comparison of shear bond strength of metal orthodontic brackets bonded to a CAD/CAM prosthetic provisional material after the use of a self-adhesive resin cement versus a light adhesive paste and different surface conditioning protocols: An in vitro.... Int Orthod. 2022; 20(3):100661. DOI: 10.1016/j.ortho.2022.100661. View

4.
Eslamian L, Borzabadi-Farahani A, Karimi S, Saadat S, Badiee M . Evaluation of the Shear Bond Strength and Antibacterial Activity of Orthodontic Adhesive Containing Silver Nanoparticle, an In-Vitro Study. Nanomaterials (Basel). 2020; 10(8). PMC: 7466539. DOI: 10.3390/nano10081466. View

5.
Behnaz M, Dalaie K, Mirmohammadsadeghi H, Salehi H, Rakhshan V, Aslani F . Shear bond strength and adhesive remnant index of orthodontic brackets bonded to enamel using adhesive systems mixed with TiO2 nanoparticles. Dental Press J Orthod. 2018; 23(4):43.e1-43.e7. PMC: 6150699. DOI: 10.1590/2177-6709.23.4.43.e1-7.onl. View