» Articles » PMID: 38893909

Properties and Possibilities of Using Biochar Composites Made on the Basis of Biomass and Waste Residues Ferryferrohydrosol Sorbent

Overview
Publisher MDPI
Date 2024 Jun 19
PMID 38893909
Authors
Affiliations
Soon will be listed here.
Abstract

Biochar enriched with metals has an increased potential for sorption of organic and inorganic pollutants. The aim of the research was to identify the possibility of using biochar composites produced on the basis of waste plant biomass and waste FFH (ferryferrohydrosol) containing iron atoms, after CO capture. The composites were produced in a one-stage or two-stage pyrolysis process. Their selected properties were determined as follows: pH, ash content, C, H, N, O, specific surface area, microstructure and the presence of surface functional groups. The produced biochar and composites had different properties resulting from the production method and the additive used. The results of experiments on the removal of methylene blue (MB) from solutions allowed us to rank the adsorbents used according to the maximum dye removal value achieved as follows: BC1 (94.99%), B (84.61%), BC2 (84.09%), BC3 (83.23%) and BC4 (83.23%). In terms of maximum amoxicillin removal efficiency, the ranking is as follows: BC1 (55.49%), BC3 (23.51%), BC2 (18.13%), B (13.50%) and BC4 (5.98%). The maximum efficiency of diclofenac removal was demonstrated by adsorbents BC1 (98.71), BC3 (87.08%), BC4 (74.20%), B (36.70%) and BC2 (30.40%). The most effective removal of metals Zn, Pb and Cd from the solution was demonstrated by BC1 and BC3 composites. The final concentration of the tested metals after sorption using these composites was less than 1% of the initial concentration. The highest increase in biomass on prepared substrates was recorded for the BC5 composite. It was higher by 90% and 54% (for doses of 30 g and 15 g, respectively) in relation to the biomass growth in the soil without additives. The BC1 composite can be used in pollutant sorption processes. However, BC5 has great potential as a soil additive in crop yield and plant growth.

References
1.
Li Y, Gao L, Wang Y, Cheng S, Wu G, Yang X . Development of an acidized biochar-supported hydrated Fe(III) oxides for highly efficient cadmium and copper sequestration from water. Sci Total Environ. 2021; 784:147017. DOI: 10.1016/j.scitotenv.2021.147017. View

2.
Algethami J, Irshad M, Javed W, Alhamami M, Ibrahim M . Iron-modified biochar improves plant physiology, soil nutritional status and mitigates Pb and Cd-hazard in wheat ( L.). Front Plant Sci. 2023; 14:1221434. PMC: 10470012. DOI: 10.3389/fpls.2023.1221434. View

3.
Zhang J, Lu F, Zhang H, Shao L, Chen D, He P . Multiscale visualization of the structural and characteristic changes of sewage sludge biochar oriented towards potential agronomic and environmental implication. Sci Rep. 2015; 5:9406. PMC: 4371148. DOI: 10.1038/srep09406. View

4.
Picard M, Thakur S, Misra M, Mielewski D, Mohanty A . Biocarbon from peanut hulls and their green composites with biobased poly(trimethylene terephthalate) (PTT). Sci Rep. 2020; 10(1):3310. PMC: 7039894. DOI: 10.1038/s41598-020-59582-3. View

5.
Srinivasan P, Sarmah A, Smernik R, Das O, Farid M, Gao W . A feasibility study of agricultural and sewage biomass as biochar, bioenergy and biocomposite feedstock: production, characterization and potential applications. Sci Total Environ. 2015; 512-513:495-505. DOI: 10.1016/j.scitotenv.2015.01.068. View