» Articles » PMID: 38760659

New Insights and Novel Perspectives in Bileaflet Mechanical Heart Valve Prostheses Thromboresistance

Overview
Authors
Affiliations
Soon will be listed here.
Abstract

Background: Although well-known for their thromboresistance, bileaflet mechanical heart valves (BMHV) require lifelong anti-thrombotic therapy. This must be associated with a certain level of thrombogenicity. Since both thromboresistance and thrombogenicity are explained by the blood-artificial surface or liquid-solid interactions, the aim of the present study was to explore BMHV thromboresistance from new perspectives. The wettability of BMHV pyrolytic carbon (PyC) occluders was investigated in under-liquid conditions. The submerged BMHV wettability clarifies the mechanisms involved in the thromboresistance.

Methods: The PyC occluders of a SJM Regent™ BMHV were previously laser irradiated, to create a surface hierarchical nano-texture, featuring three nano-configurations. Additionally, four PyC occluders of standard BMHV (Carbomedics, SJM Regent, Bicarbon, On-X), were investigated. All occluders were evaluated in under-liquid configuration, with silicon oil used as the working droplet, while water, simulating blood, was used as the surrounding liquid. The under-liquid droplet-substrate wetting interactions were analyzed using contact angle goniometry.

Results: All the standard occluders showed very low contact angle, reflecting a pronounced affinity for non-polar molecules. No receding of the contact line could be observed for the untreated occluders. The smallest static contact angle of around 61° could be observed for On-X valve (the only valve made of full PyC). The laser-treated occluders strongly repelled oil in underwater conditions. A drastic change in their wetting behaviour was observed depending on the surrounding fluid, displaying a hydrophobic behaviour in the presence of air (as the surrounding medium), and showing instead a hydrophilic nature, when surrounded by water.

Conclusions: BMHV "fear" water and blood. The intrinsic affinity of BMHV for nonpolar fluids can be translated into a tendency to repel polar fluids, such as water and blood. The blood-artificial surface interaction in BMHV is minimized. The contact between blood and BMHV surface is drastically reduced by polar-nonpolar Van der Waals forces. The "hydro/bloodphobia" of BMHV is intrinsically related to their chemical composition and their surface energy, thus their material: PyC indeed. Pertaining to thromboresistance, the surface roughness does not play a significant role. Instead, the thromboresistance of BMHV lies in molecular interactions. BMHV wettability can be tuned by altering the surface interface, by means of nanotechnology.

References
1.
Chaux A, Gray R, Stupka J, Emken M, Scotten L, Siegel R . Anticoagulant independent mechanical heart valves: viable now or still a distant holy grail. Ann Transl Med. 2017; 4(24):525. PMC: 5233483. DOI: 10.21037/atm.2016.12.58. View

2.
Kambe Y, Mahara A, Tanaka H, Kakinoki S, Fukazawa K, Liu Y . Short-term evaluation of thromboresistance of a poly(ether ether ketone) (PEEK) mechanical heart valve with poly(2-methacryloyloxyethyl phosphorylcholine) (PMPC)-grafted surface in a porcine aortic valve replacement model. J Biomed Mater Res A. 2019; 107(5):1052-1063. DOI: 10.1002/jbm.a.36628. View

3.
Chen L, Liu M, Bai H, Chen P, Xia F, Han D . Antiplatelet and thermally responsive poly(N-isopropylacrylamide) surface with nanoscale topography. J Am Chem Soc. 2009; 131(30):10467-72. DOI: 10.1021/ja9019935. View

4.
Meng J, Zhu G, Xu H . [Effects of nanotopography for biomaterials on cell behaviors]. Sheng Wu Yi Xue Gong Cheng Xue Za Zhi. 2007; 24(3):685-9. View

5.
Bluestein D, Chandran K, Manning K . Towards non-thrombogenic performance of blood recirculating devices. Ann Biomed Eng. 2010; 38(3):1236-56. PMC: 2862578. DOI: 10.1007/s10439-010-9905-9. View