» Articles » PMID: 36772010

Removal of Bromine from Polymer Blends with a Composition Simulating That Found in Waste Electric and Electronic Equipment Through a Facile and Environmentally Friendly Method

Overview
Publisher MDPI
Date 2023 Feb 11
PMID 36772010
Authors
Affiliations
Soon will be listed here.
Abstract

The increasing volume of plastics from waste electric and electronic equipment (WEEE) nowadays is of major concern since the various toxic compounds that are formed during their handling enhance the difficulties in recycling them. To overcome these problems, this work examines solvent extraction as a pretreatment method, prior to thermochemical recycling by pyrolysis. The aim is to remove bromine from some polymeric blends, with a composition that simulates WEEE, in the presence of tetrabromobisphenol A (TBBPA). Various solvents-isopropanol, ethanol and butanol-as well as several extraction times, were investigated in order to find the optimal choice. Before and after the pretreatment, blends were analysed by X-ray fluorescence (XRF) to estimate the total bromine content. Blends were pyrolyzed before and after the soxhlet extraction in order to evaluate the derived products. FTIR measurements of the polymeric blends before and after the soxhlet extraction showed that their structure was maintained. From the results obtained, it was indicated that the reduction of bromine was achieved in all cases tested and it was ~34% for blend I and ~46% and 42% for blend II when applying a 6 h soxhlet with isopropanol and ethanol, respectively. When using butanol bromine was completely eliminated, since the reduction reached almost 100%. The latter finding is of great importance, since the complete removal of bromine enables the recycling of pure plastics. Therefore, the main contribution of this work to the advancement of knowledge lies in the use of a solvent (i.e., butanol) which is environmentally friendly and with a high dissolving capacity in brominated compounds, which can be used in a pretreatment stage of plastic wastes before it is recycled by pyrolysis.

Citing Articles

Thermal and Catalytic Recycling of Plastics from Waste Electrical and Electronic Equipment-Challenges and Perspectives.

Achilias D, Charitopoulou M, Vecchio Ciprioti S Polymers (Basel). 2024; 16(17).

PMID: 39274169 PMC: 11398207. DOI: 10.3390/polym16172538.

References
1.
Chaine C, Hursthouse A, McLean B, McLellan I, McMahon B, McNulty J . Recycling Plastics from WEEE: A Review of the Environmental and Human Health Challenges Associated with Brominated Flame Retardants. Int J Environ Res Public Health. 2022; 19(2). PMC: 8775953. DOI: 10.3390/ijerph19020766. View

2.
Evangelopoulos P, Arato S, Persson H, Kantarelis E, Yang W . Reduction of brominated flame retardants (BFRs) in plastics from waste electrical and electronic equipment (WEEE) by solvent extraction and the influence on their thermal decomposition. Waste Manag. 2018; 94:165-171. DOI: 10.1016/j.wasman.2018.06.018. View

3.
Esposito L, Cafiero L, De Angelis D, Tuffi R, Vecchio Ciprioti S . Valorization of the plastic residue from a WEEE treatment plant by pyrolysis. Waste Manag. 2020; 112:1-10. DOI: 10.1016/j.wasman.2020.05.022. View

4.
Yang X, Sun L, Xiang J, Hu S, Su S . Pyrolysis and dehalogenation of plastics from waste electrical and electronic equipment (WEEE): a review. Waste Manag. 2012; 33(2):462-73. DOI: 10.1016/j.wasman.2012.07.025. View

5.
Charitopoulou M, Papadopoulou L, Achilias D . Effect of brominated flame retardant on the pyrolysis products of polymers originating in WEEE. Environ Sci Pollut Res Int. 2021; 29(20):29570-29582. DOI: 10.1007/s11356-021-15489-8. View