» Articles » PMID: 36770006

Load-Oriented Nonplanar Additive Manufacturing Method for Optimized Continuous Carbon Fiber Parts

Overview
Publisher MDPI
Date 2023 Feb 11
PMID 36770006
Authors
Affiliations
Soon will be listed here.
Abstract

The process of the additive manufacturing (AM) of carbon-fiber-reinforced polymer (CFRP) parts based on the process of fused deposition modeling (FDM) has seen considerable research in recent years, which amplifies the importance of adapted slicing and pathplanning methods. In particular, load-oriented techniques are of high interest when employing carbon fiber materials, as classical methods, such as tape-laying and laminating, struggle with highly curved and complex geometries and require the costly production of molds. While there have been some promising propositions in this field, most have restricted themselves to a planar slicing approach, which severely limits the ability to place the fibers along stress paths. In this paper, a nonplanar slicing approach is presented that utilizes principal stress directions to construct optimized nonplanar constituting layers on which pathplanning can be carried out. These layers are oriented such that the effect of the weak interlayer adhesion is minimized. Support material is adaptively generated to enable the use of arbitrary part geometry. Furthermore, a continuous pathplanning method and post-processor are applied to yield manufacturing instructions. The approach is verified for its viability of application through experimental investigation on a multi-axis robotic 3D printer. This constitutes an important step in allowing the fabrication of CFRP parts to further utilize the possibilities of additive manufacturing.

Citing Articles

Additive Manufacturing of Continuous Fiber-Reinforced Polymer Composites via Fused Deposition Modelling: A Comprehensive Review.

Jamal M, Shah O, Ghafoor U, Qureshi Y, Bhutta M Polymers (Basel). 2024; 16(12).

PMID: 38931971 PMC: 11207325. DOI: 10.3390/polym16121622.

References
1.
Virtanen P, Gommers R, Oliphant T, Haberland M, Reddy T, Cournapeau D . SciPy 1.0: fundamental algorithms for scientific computing in Python. Nat Methods. 2020; 17(3):261-272. PMC: 7056644. DOI: 10.1038/s41592-019-0686-2. View

2.
Harris C, Millman K, van der Walt S, Gommers R, Virtanen P, Cournapeau D . Array programming with NumPy. Nature. 2020; 585(7825):357-362. PMC: 7759461. DOI: 10.1038/s41586-020-2649-2. View

3.
Dickson A, Abourayana H, Dowling D . 3D Printing of Fibre-Reinforced Thermoplastic Composites Using Fused Filament Fabrication-A Review. Polymers (Basel). 2020; 12(10). PMC: 7601740. DOI: 10.3390/polym12102188. View