Enhancing Performance and Stability of Perovskite Solar Cells Through Surface Defect Passivation with Organic Bidentate Lewis Bases

Overview

Journal ACS Omega

Publisher American Chemical Society

Specialty Chemistry

Date 2022 Sep 19

PMID 36119984

Authors

Weibo Yan

Wensheng Yang

Kangjie Zhang

Hui Yu

Yuntian Yang

Hao Fan

Yuanyuan Qi

Hao Xin

Affiliations

Soon will be listed here.

Abstract

Organic Lewis bases [2,2'-bipyridine (BPY), 4-hydroxy-1,5-naphthyridine-3-carbonitrile (DQCN), and thenoyltrifluoroacetone (TTFA)] with bi-coordination sites of N and O were employed as perovskite surface defect passivants to address the efficiency and stability issues of perovskite solar cells (PSCs), with typical phenethylammonium iodide (PEAI) and piperazinium iodide (PI) passivants as reference. The surface properties of the perovskite films before and after passivation were characterized by Fourier-transform infrared, ultraviolet-visible, photoluminescence (PL), and time-resolved PL spectroscopy, X-ray diffraction, ultraviolet photoelectron spectroscopy, scanning electron microscopy, and atomic force microscopy. The characterizations reveal that BPY, DQCN, or TTFA forms coordination bonds with exposed "Pb", leading to a slight decrease in the highest occupied molecular orbital or lowest unoccupied molecular orbital energy level and bandgap. These passivants (especially TTFA) can passivate the perovskite surface defects to inhibit non-radiative recombination while having almost no influence on the grain size and surface morphology. Utilizing the passivated perovskite as the light absorption layer, solar cells with an inverted configuration of indium tin oxide/NiO /passivated MAPbCl I /C/BCP/Ag have been fabricated, and power conversion efficiencies of 19.22, 17.85, 16.49, 16.31, and 17.88% have been achieved from PEAI, PI, BPY, DQCN, and TTFA, respectively. All the device performance based on passivated perovskite is superior to that of the control (15.75%) owing to the reduced carrier recombination. The device from TTFA exhibits almost comparable efficiency to that of PEAI and PI controls, indicating that TTFA has an equal excellent passivation effect to state-of-the-art PEAI and PI. Furthermore, the devices based on BPY, DQCN, and TTFA show superior long-term stability with an efficiency loss of only 13.2, 16.7, and 12.9%, respectively, after being stored for 40 days in a ∼12% humidity, low-oxygen level environment, which is 45.4, 38.8, and 44.4% for the control, PEAI, and PI devices, respectively, primarily due to the improved hydrophobicity of the perovskite surface. Our results demonstrate that it is feasible to achieve high-efficiency and long-term-stable perovskite solar cells via selecting the appropriate molecules to passivate perovskite surface defects.

References

Zhao W, Xu J, He K, Cai Y, Han Y, Yang S . A Special Additive Enables All Cations and Anions Passivation for Stable Perovskite Solar Cells with Efficiency over 23. Nanomicro Lett. 2021; 13(1):169. PMC: 8346611. DOI: 10.1007/s40820-021-00688-2. View

Zhang H, Lv Y, Wang J, Ma H, Sun Z, Huang W . Influence of Cl Incorporation in Perovskite Precursor on the Crystal Growth and Storage Stability of Perovskite Solar Cells. ACS Appl Mater Interfaces. 2019; 11(6):6022-6030. DOI: 10.1021/acsami.8b19390. View

Kojima A, Teshima K, Shirai Y, Miyasaka T . Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. J Am Chem Soc. 2009; 131(17):6050-1. DOI: 10.1021/ja809598r. View

Liu Y, Page Z, Zhou D, Duzhko V, Kittilstved K, Emrick T . Chemical Stabilization of Perovskite Solar Cells with Functional Fulleropyrrolidines. ACS Cent Sci. 2018; 4(2):216-222. PMC: 5833006. DOI: 10.1021/acscentsci.7b00454. View

Guo X, Su J, Lin Z, Wang X, Wang Q, Zeng Z . Synergetic surface charge transfer doping and passivation toward high efficient and stable perovskite solar cells. iScience. 2021; 24(4):102276. PMC: 8005820. DOI: 10.1016/j.isci.2021.102276. View

Chen Y, Sun Y, Peng J, Tang J, Zheng K, Liang Z . 2D Ruddlesden-Popper Perovskites for Optoelectronics. Adv Mater. 2017; 30(2). DOI: 10.1002/adma.201703487. View

He J, Su J, Lin Z, Ma J, Zhou L, Zhang S . Enhanced Efficiency and Stability of All-Inorganic CsPbI Br Perovskite Solar Cells by Organic and Ionic Mixed Passivation. Adv Sci (Weinh). 2021; 8(17):e2101367. PMC: 8425869. DOI: 10.1002/advs.202101367. View

Min H, Kim M, Lee S, Kim H, Kim G, Choi K . Efficient, stable solar cells by using inherent bandgap of α-phase formamidinium lead iodide. Science. 2019; 366(6466):749-753. DOI: 10.1126/science.aay7044. View

Lin Y, Shen L, Dai J, Deng Y, Wu Y, Bai Y . π-Conjugated Lewis Base: Efficient Trap-Passivation and Charge-Extraction for Hybrid Perovskite Solar Cells. Adv Mater. 2016; 29(7). DOI: 10.1002/adma.201604545. View

10.

Li F, Deng X, Qi F, Li Z, Liu D, Shen D . Regulating Surface Termination for Efficient Inverted Perovskite Solar Cells with Greater Than 23% Efficiency. J Am Chem Soc. 2020; 142(47):20134-20142. DOI: 10.1021/jacs.0c09845. View

11.

Min H, Lee D, Kim J, Kim G, Lee K, Kim J . Perovskite solar cells with atomically coherent interlayers on SnO electrodes. Nature. 2021; 598(7881):444-450. DOI: 10.1038/s41586-021-03964-8. View

12.

Chen B, Rudd P, Yang S, Yuan Y, Huang J . Imperfections and their passivation in halide perovskite solar cells. Chem Soc Rev. 2019; 48(14):3842-3867. DOI: 10.1039/c8cs00853a. View

13.

Zhou L, Su J, Lin Z, Guo X, Ma J, Li T . Synergistic Interface Layer Optimization and Surface Passivation with Fluorocarbon Molecules toward Efficient and Stable Inverted Planar Perovskite Solar Cells. Research (Wash D C). 2021; 2021:9836752. PMC: 8261667. DOI: 10.34133/2021/9836752. View

14.

Heo J, Park S, Im S, Son H . Development of Dopant-Free Donor-Acceptor-type Hole Transporting Material for Highly Efficient and Stable Perovskite Solar Cells. ACS Appl Mater Interfaces. 2017; 9(45):39511-39518. DOI: 10.1021/acsami.7b11938. View