Influences of Toothbrushing and Different Toothpastes on the Surface Roughness and Color Stability of Interim Prosthodontic Materials

Overview

Journal Materials (Basel)

Publisher MDPI

Date 2022 Sep 9

PMID 36079211

Authors

Aysegul Koroglu

Onur Sahin

Ahmet Serkan Kucukekenci

Dogu Omur Dede

Husniye Yildirim

Burak Yilmaz

Affiliations

Soon will be listed here.

Abstract

The surface properties and color stability of interim crown materials may vary depending on the toothbrushing procedure. This study aimed to investigate the effects of toothbrushing and different toothpastes on the surface roughness (Ra) and color stability of different interim crown materials. Disc-shaped specimens were prepared from four interim crown materials (Tab 2000 (ChPM), Imident (LaPM), Protemp 4 (ChDM), and Telio-CAD (CadPM)). Specimens were divided into four subgroups for the control group (Cnt) and for simulated toothbrushing with distilled water (Dw) or with two different toothpastes (whitening toothpaste (WTp), activated charcoal toothpaste (ACTp)). The specimens’ Ra values were measured before and after 10,000 cycles of toothbrushing. The color parameters were measured and the color differences (ΔE00) were calculated. Data were statistically analyzed by two-way analysis of variance (ANOVA) and Tukey’s HSD tests. A significant increase in the Ra values was observed after toothbrushing, except for the LaPM_Dw, ChDM_Dw, and all the CadPM specimens (p < 0.05). Toothbrushing with toothpastes increased the ΔE00 values of all ChPM and ChDM interim materials (p < 0.05). Before and after all toothbrushing procedures, the CadPM specimens had smoother and ChPM specimens had rougher surfaces than the other interim materials. The two tested toothpastes had similar effects on the Ra of all interim materials. Non-perceivable color changes were seen only with the CadPM_Dw group.

Citing Articles

Effect of herbal toothpaste on the colour stability, surface roughness, and microhardness of aesthetic restorative materials-an in vitro study.

Hazra Y, Rao A, Natarajan S, Srikrishna S BDJ Open. 2024; 10(1):95.

PMID: 39690175 PMC: 11652633. DOI: 10.1038/s41405-024-00280-x.

The Effect of Charcoal-Based Dentifrice and Conventional Whitening Toothpaste on the Color Stability and Surface Roughness of Composite Resin: A Systematic Review of In Vitro Studies.

Wiktorski C, Michelogiannakis D, Rossouw P, Javed F Dent J (Basel). 2024; 12(3).

PMID: 38534282 PMC: 10969454. DOI: 10.3390/dj12030058.

The Toothbrushing Effects on Surface Properties and Color Stability of CAD/CAM and Pressable Ceramic Fixed Restorations-An In Vitro Study.

Mahrous A, Alhammad A, Alqahtani F, Aljar Y, Alkadi A, Taymour N Materials (Basel). 2023; 16(8).

PMID: 37109785 PMC: 10142931. DOI: 10.3390/ma16082950.

References

Haselton D, Diaz-Arnold A, Dawson D . Effect of storage solution on surface roughness of provisional crown and fixed partial denture materials. J Prosthodont. 2004; 13(4):227-32. DOI: 10.1111/j.1532-849X.2004.04039.x. View

Dos Santos J, Silva N, Gomes M, Paschoal M, Gomes I . Whitening toothpastes effect on nanoparticle resin composite roughness after a brushing challenge: An study. J Clin Exp Dent. 2019; 11(4):e334-e339. PMC: 6522101. DOI: 10.4317/jced.55533. View

Rutkunas V, Sabaliauskas V, Mizutani H . Effects of different food colorants and polishing techniques on color stability of provisional prosthetic materials. Dent Mater J. 2010; 29(2):167-76. DOI: 10.4012/dmj.2009-075. View

Sarac D, Sarac Y, Kulunk S, Ural C, Kulunk T . The effect of polishing techniques on the surface roughness and color change of composite resins. J Prosthet Dent. 2006; 96(1):33-40. DOI: 10.1016/j.prosdent.2006.04.012. View

Satpathy A, M R D, Gujjari A . An Evaluation of the Adherence of Candida albicans on the Surface of Heat Cure Denture Base Material Subjected to Different Stages of Polishing. J Clin Diagn Res. 2013; 7(10):2360-3. PMC: 3843412. DOI: 10.7860/JCDR/2013/6082.3524. View

Roopa K, Basappa N, Prabhakar A, Raju O, Lamba G . Effect of Whitening Dentifrice on Micro Hardness, Colour Stability and Surface Roughness of Aesthetic Restorative Materials. J Clin Diagn Res. 2016; 10(3):ZC06-11. PMC: 4843376. DOI: 10.7860/JCDR/2016/15700.7350. View

Macedo M, Volpato C, Henriques B, Vaz P, Silva F, Silva C . Color stability of a bis-acryl composite resin subjected to polishing, thermocycling, intercalated baths, and immersion in different beverages. J Esthet Restor Dent. 2018; 30(5):449-456. DOI: 10.1111/jerd.12404. View

Sen D, Goller G, Issever H . The effect of two polishing pastes on the surface roughness of bis-acryl composite and methacrylate-based resins. J Prosthet Dent. 2002; 88(5):527-32. DOI: 10.1067/mpr.2002.129335. View

Ghinea R, Perez M, Herrera L, Rivas M, Yebra A, Paravina R . Color difference thresholds in dental ceramics. J Dent. 2010; 38 Suppl 2:e57-64. DOI: 10.1016/j.jdent.2010.07.008. View

10.

Joiner A . Whitening toothpastes: a review of the literature. J Dent. 2010; 38 Suppl 2:e17-24. DOI: 10.1016/j.jdent.2010.05.017. View

11.

Bollen C, Papaioanno W, Van Eldere J, Schepers E, Quirynen M, van Steenberghe D . The influence of abutment surface roughness on plaque accumulation and peri-implant mucositis. Clin Oral Implants Res. 1996; 7(3):201-11. DOI: 10.1034/j.1600-0501.1996.070302.x. View

12.

Paravina R, Ghinea R, Herrera L, Bona A, Igiel C, Linninger M . Color difference thresholds in dentistry. J Esthet Restor Dent. 2015; 27 Suppl 1:S1-9. DOI: 10.1111/jerd.12149. View

13.

Augusto M, Andrade G, Caneppele T, Borges A, Torres C . Nanofilled bis-acryl composite resin materials: Is it necessary to polish?. J Prosthet Dent. 2020; 124(4):494.e1-494.e5. DOI: 10.1016/j.prosdent.2020.03.015. View

14.

Wulknitz P . Cleaning power and abrasivity of European toothpastes. Adv Dent Res. 1998; 11(4):576-9. DOI: 10.1177/08959374970110042701. View

15.

Elagra M, Rayyan M, Alhomaidhi M, Alanaziy A, Alnefaie M . Color stability and marginal integrity of interim crowns: An study. Eur J Dent. 2017; 11(3):330-334. PMC: 5594961. DOI: 10.4103/ejd.ejd_66_17. View

16.

Devila A, Lasta R, Zanella L, Agnol M, Rodrigues-Junior S . Efficacy and Adverse Effects of Whitening Dentifrices Compared With Other Products: A Systematic Review and Meta-analysis. Oper Dent. 2019; 45(2):E77-E90. DOI: 10.2341/18-298-L. View

17.

Goldstein G, Lerner T . The effect of toothbrushing on a hybrid composite resin. J Prosthet Dent. 1991; 66(4):498-500. DOI: 10.1016/0022-3913(91)90511-t. View

18.

Borchers L, Tavassol F, Tschernitschek H . Surface quality achieved by polishing and by varnishing of temporary crown and fixed partial denture resins. J Prosthet Dent. 1999; 82(5):550-6. DOI: 10.1016/s0022-3913(99)70053-3. View

19.

Mickeviciute E, Ivanauskiene E, Noreikiene V . In vitro color and roughness stability of different temporary restorative materials. Stomatologija. 2016; 18(2):66-72. View

20.

Halis G, Koroglu A, Sahin O, Dede D, Yilmaz B . Effect of simulated tootbrushing on surface roughness of sealant agent coupled nanohybrid composite resins. J Esthet Restor Dent. 2022; 34(6):907-914. DOI: 10.1111/jerd.12871. View