Microstructure Evolution in Plastic Deformed Bismuth Telluride for the Enhancement of Thermoelectric Properties

Overview

Journal Materials (Basel)

Publisher MDPI

Date 2022 Jun 24

PMID 35744268

Authors

Haishan Shen

In-Yea Kim

Jea-Hong Lim

Hong-Baek Cho

Yong-Ho Choa

Affiliations

Soon will be listed here.

Abstract

Thermoelectric generators are solid-state energy-converting devices that are promising alternative energy sources. However, during the fabrication of these devices, many waste scraps that are not eco-friendly and with high material cost are produced. In this work, a simple powder processing technology is applied to prepare n-type BiTe pellets by cold pressing (high pressure at room temperature) and annealing the treatment with a canning package to recycle waste scraps. High-pressure cold pressing causes the plastic deformation of densely packed pellets. Then, the thermoelectric properties of pellets are improved through high-temperature annealing (500 ∘C) without phase separation. This enhancement occurs because tellurium cannot escape from the canning package. In addition, high-temperature annealing induces rapid grain growth and rearrangement, resulting in a porous structure. Electrical conductivity is increased by abnormal grain growth, whereas thermal conductivity is decreased by the porous structure with phonon scattering. Owing to the low thermal conductivity and satisfactory electrical conductivity, the highest ZT value (i.e., 1.0) is obtained by the samples annealed at 500 ∘C. Hence, the proposed method is suitable for a cost-effective and environmentally friendly way.

References

Ghodke S, Yamamoto A, Hu H, Nishino S, Matsunaga T, Byeon D . Improved Thermoelectric Properties of Re-Substituted Higher Manganese Silicides by Inducing Phonon Scattering and an Energy-Filtering Effect at Grain Boundary Interfaces. ACS Appl Mater Interfaces. 2019; 11(34):31169-31175. DOI: 10.1021/acsami.9b09397. View

Dudina D, Bokhonov B, Olevsky E . Fabrication of Porous Materials by Spark Plasma Sintering: A Review. Materials (Basel). 2019; 12(3). PMC: 6384847. DOI: 10.3390/ma12030541. View

Medlin D, Yang N, Spataru C, Hale L, Mishin Y . Unraveling the dislocation core structure at a van der Waals gap in bismuth telluride. Nat Commun. 2019; 10(1):1820. PMC: 6478677. DOI: 10.1038/s41467-019-09815-5. View

Cai B, Zhuang H, Cao Q, Hu H, Dong J, Asfandiyar . Practical High-Performance (Bi,Sb)Te-Based Thermoelectric Nanocomposites Fabricated by Nanoparticle Mixing and Scrap Recycling. ACS Appl Mater Interfaces. 2020; 12(14):16426-16435. DOI: 10.1021/acsami.0c01014. View

Jo S, Choo S, Kim F, Heo S, Son J . Ink Processing for Thermoelectric Materials and Power-Generating Devices. Adv Mater. 2018; 31(20):e1804930. DOI: 10.1002/adma.201804930. View

Nam W, Kim B, Lim Y, Dae K, Seo W, Park H . Phonon-glass electron-crystals in ZnO-multiwalled carbon nanotube nanocomposites. Nanoscale. 2017; 9(35):12941-12948. DOI: 10.1039/c7nr03747c. View

Hong M, Chasapis T, Chen Z, Yang L, Kanatzidis M, Snyder G . n-Type Bi2Te3-xSex Nanoplates with Enhanced Thermoelectric Efficiency Driven by Wide-Frequency Phonon Scatterings and Synergistic Carrier Scatterings. ACS Nano. 2016; 10(4):4719-27. DOI: 10.1021/acsnano.6b01156. View

Liu Y, Sahoo P, Makongo J, Zhou X, Kim S, Chi H . Large enhancements of thermopower and carrier mobility in quantum dot engineered bulk semiconductors. J Am Chem Soc. 2013; 135(20):7486-95. DOI: 10.1021/ja311059m. View

Fang H, Feng T, Yang H, Ruan X, Wu Y . Synthesis and thermoelectric properties of compositional-modulated lead telluride-bismuth telluride nanowire heterostructures. Nano Lett. 2013; 13(5):2058-63. DOI: 10.1021/nl400319u. View

10.

Kim K, Lim S, Lee S, Hong J, Cho D, Mohamed A . Precision Interface Engineering of an Atomic Layer in Bulk BiTe Alloys for High Thermoelectric Performance. ACS Nano. 2019; 13(6):7146-7154. DOI: 10.1021/acsnano.9b02574. View

11.

Wang Y, Liu W, Gao H, Wang L, Li M, Shi X . High Porosity in Nanostructured -Type BiTe Obtaining Ultralow Lattice Thermal Conductivity. ACS Appl Mater Interfaces. 2019; 11(34):31237-31244. DOI: 10.1021/acsami.9b12079. View

12.

Son J, Choi M, Han M, Park K, Kim J, Lim S . n-Type nanostructured thermoelectric materials prepared from chemically synthesized ultrathin Bi2Te3 nanoplates. Nano Lett. 2012; 12(2):640-7. DOI: 10.1021/nl203389x. View

13.

Kumar D, Idapalapati S, Wang W, Narasimalu S . Effect of Surface Mechanical Treatments on the Microstructure-Property-Performance of Engineering Alloys. Materials (Basel). 2019; 12(16). PMC: 6720836. DOI: 10.3390/ma12162503. View

14.

Greifzu M, Tkachov R, Stepien L, Lopez E, Bruckner F, Leyens C . Laser Treatment as Sintering Process for Dispenser Printed Bismuth Telluride Based Paste. Materials (Basel). 2019; 12(20). PMC: 6829204. DOI: 10.3390/ma12203453. View

15.

Wang H, Luo G, Tan C, Xiong C, Guo Z, Yin Y . Phonon Engineering for Thermoelectric Enhancement of p-Type Bismuth Telluride by a Hot-Pressing Texture Method. ACS Appl Mater Interfaces. 2020; 12(28):31612-31618. DOI: 10.1021/acsami.0c07376. View

16.

Jung S, Kim J, Kim D, Kim S, Park H, Kim J . Strain-assisted, low-temperature synthesis of high-performance thermoelectric materials. Phys Chem Chem Phys. 2014; 16(8):3529-33. DOI: 10.1039/c3cp54969k. View

17.

Kim S, Lee K, Mun H, Kim H, Hwang S, Roh J . Thermoelectrics. Dense dislocation arrays embedded in grain boundaries for high-performance bulk thermoelectrics. Science. 2015; 348(6230):109-14. DOI: 10.1126/science.aaa4166. View

18.

Messing G, Stevenson A . Materials science. Toward pore-free ceramics. Science. 2008; 322(5900):383-4. DOI: 10.1126/science.1160903. View

19.

Morelli D, Jovovic V, Heremans J . Intrinsically minimal thermal conductivity in cubic I-V-VI2 semiconductors. Phys Rev Lett. 2008; 101(3):035901. DOI: 10.1103/PhysRevLett.101.035901. View