» Articles » PMID: 35517961

Label-free Detection of Creatinine Using Nitrogen-passivated Fluorescent Carbon Dots

Overview
Journal RSC Adv
Specialty Chemistry
Date 2022 May 6
PMID 35517961
Authors
Affiliations
Soon will be listed here.
Abstract

In the field of biochemistry and biosensing, the passivation of carbon dots using nitrogen dopants has attracted great attention, as this can control their photoluminescence (PL) properties and quantum yield. To date, in the fabrication of a sensing probe, the impact of the chemical composition of the passivating molecule remained unexplored. In this work, we chose a series of different nitrogen-rich precursors (such as urea, thiourea, cysteine, and glycine) and ascorbic acid to synthesize nitrogen-doped carbon dots (NCDs). A significant change in their surface states was obtained due to the evolution of variable contents of amino, pyridinic and pyrrolic nitrogen species, which is evident from X-ray photoelectron spectroscopy, and this leads to an increment in their PL quantum yields (PLQY ∼ 58%) and average lifetime values. Spectroscopic analysis revealed that a rise in the ratio of pyrrolic : amino groups on the surface of carbon dots cause a bathochromic shift and generate excitation-dependent properties of NCDs. Besides, these NCDs were used as fluorescence off-on sensing probes, where a PA-infested NCD solution was used to detect creatinine. Chiefly, fluorescence restoration was achieved due to the formation of Jaffe chromogen between creatinine and PA. However, all nitrogen-passivated carbon dot surfaces do not respond similarly towards creatinine and only non-amino-rich NCDs exhibit the maximum (50%) PL turn-on response. The PL turn-off-on methodology showed a satisfactory good linearity range between 0 and 150 μM with a detection limit of 0.021 nM for creatinine. Three input molecular logic gates were also designed based on the turn-off-on response of the NCDs@PA towards creatinine. Additionally, for analytical method validation, real-sample analysis was performed for creatinine, which showed good recoveries (93-102%) and verified that nitrogen passivation tailored the physicochemical properties and enhanced the sensing ability.

Citing Articles

Carbon dot-graphene oxide-based luminescent nanosensor for creatinine detection in human urine.

Bhatt P, Kukkar D, Yadav A Mikrochim Acta. 2024; 191(12):745.

PMID: 39548025 DOI: 10.1007/s00604-024-06838-8.


An "on-off-on" Fluorescent Sensor Based on Carbon Dots for the Detection of Au (III) and Creatinine.

Cai Z, Zhu C, Hu A, Chen G J Fluoresc. 2023; 35(2):661-672.

PMID: 38148407 DOI: 10.1007/s10895-023-03567-8.


Cytotoxicity and cell imaging of six types of carbon nanodots prepared through carbonization and hydrothermal processing of natural plant materials.

Chen Y, Jiang W, Chen H, Huang H, Huang G, Chiang H RSC Adv. 2022; 11(27):16661-16674.

PMID: 35479143 PMC: 9031421. DOI: 10.1039/d1ra01318a.

References
1.
Benkert A, Scheller F, Schossler W, Hentschel C, Micheel B, Behrsing O . Development of a creatinine ELISA and an amperometric antibody-based creatine sensor with a detection limit in the nanomolar range. Anal Chem. 2000; 72(5):916-21. DOI: 10.1021/ac9909047. View

2.
Bhunia S, Saha A, Maity A, Ray S, Jana N . Carbon nanoparticle-based fluorescent bioimaging probes. Sci Rep. 2013; 3:1473. PMC: 3600594. DOI: 10.1038/srep01473. View

3.
Bhattacharya A, Chatterjee S, Khorwal V, Mukherjee T . Luminescence turn-on/off sensing of biological iron by carbon dots in transferrin. Phys Chem Chem Phys. 2015; 18(7):5148-58. DOI: 10.1039/c5cp05890b. View

4.
Ding H, Yu S, Wei J, Xiong H . Full-Color Light-Emitting Carbon Dots with a Surface-State-Controlled Luminescence Mechanism. ACS Nano. 2015; 10(1):484-91. DOI: 10.1021/acsnano.5b05406. View

5.
Khan W, Wang D, Zhang W, Tang Z, Ma X, Ding X . High Quantum Yield Green-Emitting Carbon Dots for Fe(ІІІ) Detection, Biocompatible Fluorescent Ink and Cellular Imaging. Sci Rep. 2017; 7(1):14866. PMC: 5665951. DOI: 10.1038/s41598-017-15054-9. View