» Articles » PMID: 35252453

Finite Element Analysis of Unilateral Versus Bipedicular Bone-Filling Mesh Container for the Management of Osteoporotic Compression Fractures

Overview
Journal Biomed Res Int
Publisher Wiley
Date 2022 Mar 7
PMID 35252453
Authors
Affiliations
Soon will be listed here.
Abstract

The effect of unilateral and bilateral bone-filling mesh containers (BFC) on osteoporotic vertebral compression fracture (OVCF) was analyzed by the finite element method. The CT scan data of the T12-L2 vertebral body were obtained from a healthy female volunteer with no history of lumbar spine injury or obvious abnormality of vertebral body morphology. The normal finite element model of the T12-L2 vertebral body and the finite element model of osteoporosis were established, and the models were validated. The L1 in the normal model of the vertebral body was used to simulate the vertebral compression fracture, after which the unilateral and bilateral BFC were simulated to establish models representing the two surgical approaches. We analyzed changes in the deformation and von Mises stress in vertebral bodies and intervertebral discs in the two models under seven working conditions (axial direction, anteflexion, rear protraction, left-side bending, right-side bending, left rotation, and right rotation) and found that the unilateral and bilateral approaches are biomechanically comparable, with no statistical difference between the two overall models.

Citing Articles

Clinical efficacy and biomechanical analysis of a novel hollow pedicle screw combined with kyphoplasty for the treatment of Kümmell disease.

Zhong S, Zhong H, Huang K, Zhao Y, Lei W, Li W JOR Spine. 2024; 7(4):e70017.

PMID: 39649796 PMC: 11622290. DOI: 10.1002/jsp2.70017.


Finite element study on three osteotomy methods for treating thoracolumbar osteoporotic fracture vertebral collapse complicated with neurological dysfunction.

Long Z, Zhou J, Xiong L, Chen G, Wen J Medicine (Baltimore). 2024; 103(7):e36987.

PMID: 38363921 PMC: 10869100. DOI: 10.1097/MD.0000000000036987.


Biomechanical behaviour of a novel bone cement screw in the minimally invasive treatment of Kummell's disease: a finite element study.

Xu H, Feng Q, Ma X, Lan J, Ji J, Zhang Z BMC Musculoskelet Disord. 2023; 24(1):967.

PMID: 38098003 PMC: 10720208. DOI: 10.1186/s12891-023-07090-6.


Biomechanical evaluation of percutaneous anterograde and retrograde screw implantation for superior ramus pubis fractures: a finite element analysis.

Xu L, Cao X, Lu H, Liu D, Wu Q, Liu R Am J Transl Res. 2023; 14(12):8676-8685.

PMID: 36628226 PMC: 9827299.


A 20-Year Review of Biomechanical Experimental Studies on Spine Implants Used for Percutaneous Surgical Repair of Vertebral Compression Fractures.

Gajavelli S, Gee A, Bagheri Z, Schemitsch E, Bailey C, Rasoulinejad P Biomed Res Int. 2022; 2022:6015067.

PMID: 36187502 PMC: 9519286. DOI: 10.1155/2022/6015067.

References
1.
Noailly J, Lacroix D, Planell J . Finite element study of a novel intervertebral disc substitute. Spine (Phila Pa 1976). 2005; 30(20):2257-64. DOI: 10.1097/01.brs.0000182319.81795.72. View

2.
Liang D, Ye L, Jiang X, Yang P, Zhou G, Yao Z . Biomechanical effects of cement distribution in the fractured area on osteoporotic vertebral compression fractures: a three-dimensional finite element analysis. J Surg Res. 2015; 195(1):246-56. DOI: 10.1016/j.jss.2014.12.053. View

3.
Hsu C, Chao C, Wang J, Hou S, Tsai Y, Lin J . Increase of pullout strength of spinal pedicle screws with conical core: biomechanical tests and finite element analyses. J Orthop Res. 2005; 23(4):788-94. DOI: 10.1016/j.orthres.2004.11.002. View

4.
Genant H, Wu C, van Kuijk C, Nevitt M . Vertebral fracture assessment using a semiquantitative technique. J Bone Miner Res. 1993; 8(9):1137-48. DOI: 10.1002/jbmr.5650080915. View

5.
Chung S, Kim Y, Wang K . Biomechanical effect of constraint in lumbar total disc replacement: a study with finite element analysis. Spine (Phila Pa 1976). 2009; 34(12):1281-6. DOI: 10.1097/BRS.0b013e3181a4ec2d. View