Development and Maintenance of Surface Gloss of Dental Composites After Polishing and Brushing: Review of the Literature

Overview

Journal J Esthet Restor Dent

Specialty Dentistry

Date 2022 Jan 28

PMID 35088935

Authors

Silvia P Amaya-Pajares

Kiyono Koi

Hidehiko Watanabe

Juliana B da Costa

Jack L Ferracane

Affiliations

Soon will be listed here.

Abstract

Objective: To describe the effect of the composites' composition to produce high surface smoothness/gloss using finishers/polishers, and to assess maintained smoothness/gloss under toothbrush abrasion.

Materials And Methods: PubMed papers published from January 01, 2000 to September 01, 2021 were included, and keywords used were: filler particle size, shape, amount of dental composites; finishing/polishing, gloss/roughness, and toothbrush abrasion of composites. Seventy-five in-vitro studies were included in this literature review. Forty-six articles assessed filler particle size/composition/shape and distribution to obtain high gloss/smoothness on different formulations; and the finishers/polishers effect on these materials. Twenty-nine papers assessed toothbrush abrasion of composites.

Results: Suprananofill/nanofill/microfills typically showed the smoothest and glossiest surfaces compared to nanohybrid, microhybrid and hybrid composites. Microfill (0.04-0.07 μm, 71-88 GU); suprananofill (0.001-0.8 μm, 52-92 GU), microhybrids (0.05-0.35 μm, 35-95 GU) and nanohybrids (0.05-0.21 μm, 66-97 GU). Composites with small, spherical particles tend to show smoother, glossier surfaces and more wear resistant compared to resin composites with larger or irregular particles. Several studies showed higher roughness and reduced gloss after toothbrush abrasion.

Conclusions: Within the limitations of this study, suprananofill/nanofill/microfill composites tended to show the smoothest/glossiest surfaces due to smaller particle size. Composites with small, spherical particles tended to show smoother/glossier surfaces. Overall, toothbrush abrasion showed higher surface roughness and reduced gloss.

Clinical Significance: Suprananofills/nanofills/microfills had good polishability and polish retention due to their smaller particle size. The effectiveness of a polishing system is material-dependent. In general, Enhance-PoGo, Sof-Lex discs, and Sof-Lex Spiral wheels showed similar level of smoothness.

Citing Articles

Proposal of a Modular Classification System for Direct Dental Resin Composites Based on Clinical Applications.

Francois P, Izart M, Fasham T, Smail Y, Jannot M, Le Goff S Polymers (Basel). 2025; 17(5).

PMID: 40076058 PMC: 11902481. DOI: 10.3390/polym17050564.

Effect of polishing systems on the roughness, color, and staining of conventional and bulk-fill resin composites with and without S-PRG filler.

Moreira E, Vieira-Junior W, Turssi C, Franca F, Basting R Clin Oral Investig. 2025; 29(2):139.

PMID: 39966184 DOI: 10.1007/s00784-025-06226-3.

Evaluation of the Mechanical Properties of Different Dental Resin-Based Materials After Submersion in Acidic Beverages.

Branzan R, Taraboanta I, Ghiorghe C, Stoleriu S, Carlescu V, Taraboanta-Gamen A Dent J (Basel). 2025; 13(1).

PMID: 39851580 PMC: 11763432. DOI: 10.3390/dj13010004.

Surface Roughness and Color Stability of Conventional and Bulk-Fill Resin Composite with S-PRG Fillers After Coffee Exposure: An in-vitro Study.

Janisch F, Falcon Aguilar M, Aguiar F, Franca F, Basting R, Vieira-Junior W Clin Cosmet Investig Dent. 2025; 17():21-29.

PMID: 39802460 PMC: 11725284. DOI: 10.2147/CCIDE.S496750.

Effects of Finishing on Surface Roughness of Four Different Glass-Ionomer Cements and One Alkasite: In Vitro Investigation over Time Using Aging Simulation.

Behlau A, Behlau I, Payer M, Leitinger G, Hanscho K, Kqiku L J Funct Biomater. 2024; 15(11).

PMID: 39590529 PMC: 11595664. DOI: 10.3390/jfb15110325.