» Articles » PMID: 34202400

Surface Properties of Graphene Functionalized TiO/nHA Hybrid Coatings Made on Ti6Al7Nb Alloys Via Plasma Electrolytic Oxidation (PEO)

Overview
Journal Molecules
Publisher MDPI
Specialty Biology
Date 2021 Jul 2
PMID 34202400
Citations 4
Authors
Affiliations
Soon will be listed here.
Abstract

Nano-hydroxyapatite (nHA)-matrix coatings containing graphene nanosheets (GNS)-nHA were coated on Ti6Al7Nb alloys by plasma electrolytic oxidation (PEO) treatment for the improvement of their surface properties. Crystallographic properties, functional groups, and elemental analysis of coatings were characterized by XRD, ATR-FTIR, and EDS analysis. Surface morphological changes of the coated surfaces were investigated by AFM and SEM. The electrochemical corrosion behavior of the coatings was examined by using the potentiodynamic scanning (PDS) tests under in-vitro conditions in simulated body fluid (SBF). The results showed that the GNS was successfully deposited in ceramic matrix coatings on Ti6Al7Nb alloys. Also, the microstructural observations revealed that the coatings have a porous and rough structure. The XRD and ATR-FTIR quantitative analysis have proved the appearance of HA and GNS in the coating layers. An increase in the coating thickness, surface hardness, and anatase/rutile transformation rate was determined, while the GNS ratio in the coating layers was increased. The microhardness of the nHA coating reinforced with 1.5 wt% GNS was measured at 862 HV, which was significantly higher than that of GNS-free (only nHA) coating (584 HV). The best in-vitro resistance to corrosion in SBF was observed in the nHA/1.5GNS wt% coating.

Citing Articles

Metal-polyphenol networks-modified tantalum plate for craniomaxillofacial reconstruction.

Wei Z, Shen Z, Deng H, Kuang T, Wang J, Gu Z Sci Rep. 2024; 14(1):1023.

PMID: 38200230 PMC: 10781789. DOI: 10.1038/s41598-024-51640-4.


Effect of Substrates Performance on the Microstructure and Properties of Phosphate Chemical Conversion Coatings on Metal Surfaces.

Du C, Zuo K, Ma Z, Zhao M, Li Y, Tian S Molecules. 2022; 27(19).

PMID: 36234969 PMC: 9572728. DOI: 10.3390/molecules27196434.


Review of the Effect of Surface Coating Modification on Magnesium Alloy Biocompatibility.

Guo X, Hu Y, Yuan K, Qiao Y Materials (Basel). 2022; 15(9).

PMID: 35591624 PMC: 9100161. DOI: 10.3390/ma15093291.


Drug infused AlO-bioactive glass coatings toward the cure of orthopedic infection.

Bargavi P, Chandran R, Durgalakshmi D, Rajashree P, Ramya R, Balakumar S Prog Biomater. 2022; 11(1):79-94.

PMID: 35094302 PMC: 8927578. DOI: 10.1007/s40204-022-00181-y.

References
1.
Liu H, Yazici H, Ergun C, Webster T, Bermek H . An in vitro evaluation of the Ca/P ratio for the cytocompatibility of nano-to-micron particulate calcium phosphates for bone regeneration. Acta Biomater. 2008; 4(5):1472-9. DOI: 10.1016/j.actbio.2008.02.025. View

2.
Li H, Khor K, Cheang P . Properties of heat-treated calcium phosphate coatings deposited by high-velocity oxy-fuel (HVOF) spray. Biomaterials. 2002; 23(10):2105-12. DOI: 10.1016/s0142-9612(01)00326-x. View

3.
Aktug S, Durdu S, Yalcin E, Cavusoglu K, Usta M . Bioactivity and biocompatibility of hydroxyapatite-based bioceramic coatings on zirconium by plasma electrolytic oxidation. Mater Sci Eng C Mater Biol Appl. 2016; 71:1020-1027. DOI: 10.1016/j.msec.2016.11.012. View

4.
Geng Z, Wang R, Zhuo X, Li Z, Huang Y, Ma L . Incorporation of silver and strontium in hydroxyapatite coating on titanium surface for enhanced antibacterial and biological properties. Mater Sci Eng C Mater Biol Appl. 2016; 71:852-861. DOI: 10.1016/j.msec.2016.10.079. View

5.
Song W, Jun Y, Han Y, Hong S . Biomimetic apatite coatings on micro-arc oxidized titania. Biomaterials. 2004; 25(17):3341-9. DOI: 10.1016/j.biomaterials.2003.09.103. View