» Articles » PMID: 32899846

Effect of Polyethylene Glycol Incorporation in Electron Transport Layer on Photovoltaic Properties of Perovskite Solar Cells

Overview
Date 2020 Sep 9
PMID 32899846
Citations 2
Authors
Affiliations
Soon will be listed here.
Abstract

Due to the characteristics of high electron mobility, ambient stability, proper energy level, and low processing temperature, zinc oxide (ZnO) has become a very promising electron transport material for photovoltaics. However, perovskite solar cells fabricated with ZnO reveal low efficiency because perovskite crystals may decompose thermally on the surface of ZnO as a result of proton transfer reactions. In this study, we are the first to incorporate an inexpensive, non-toxic polyethylene glycol (PEG) into ZnO and explore the passivation effect on the electron transport layer of perovskite solar cells. Suspension stability, surface roughness, electrical conductivity, crystal size, and photovoltaic properties with respect to the PEG incorporation are analyzed. The experimental results revealed that PEG incorporation effectively passivated the surface defects of ZnO, increased the electrical conductivity, and suppressed the charge recombination. The photocurrent density could increase from 15.2 to 19.2 mA/cm, an increase of 27%.

Citing Articles

Electrical Pumping of Perovskite Diodes: Toward Stimulated Emission.

Cho C, Antrack T, Kroll M, An Q, Barschneider T, Fischer A Adv Sci (Weinh). 2021; 8(17):e2101663.

PMID: 34240575 PMC: 8425921. DOI: 10.1002/advs.202101663.


Fabrication and Characterization of an Efficient Inverted Perovskite Solar Cells with POSS Passivating Hole Transport Layer.

Liu B, Lin H, Lee R, Gorji N, Chou J Nanomaterials (Basel). 2021; 11(4).

PMID: 33920137 PMC: 8068981. DOI: 10.3390/nano11040974.

References
1.
Fu F, Feurer T, Jager T, Avancini E, Bissig B, Yoon S . Low-temperature-processed efficient semi-transparent planar perovskite solar cells for bifacial and tandem applications. Nat Commun. 2015; 6:8932. PMC: 4696455. DOI: 10.1038/ncomms9932. View

2.
Kim K, Lim D, Hu J, Kwon J, Jeong M, Seo H . Surface modification of a ZnO electron-collecting layer using atomic layer deposition to fabricate high-performing inverted organic photovoltaics. ACS Appl Mater Interfaces. 2013; 5(17):8718-23. DOI: 10.1021/am402403x. View

3.
Edri E, Kirmayer S, Mukhopadhyay S, Gartsman K, Hodes G, Cahen D . Elucidating the charge carrier separation and working mechanism of CH3NH3PbI(3-x)Cl(x) perovskite solar cells. Nat Commun. 2014; 5:3461. DOI: 10.1038/ncomms4461. View

4.
Bera A, Sheikh A, Haque M, Bose R, Alarousu E, Mohammed O . Fast Crystallization and Improved Stability of Perovskite Solar Cells with Zn2SnO4 Electron Transporting Layer: Interface Matters. ACS Appl Mater Interfaces. 2015; 7(51):28404-11. DOI: 10.1021/acsami.5b09182. View

5.
Zhang L, Yang X, Jiang Q, Wang P, Yin Z, Zhang X . Ultra-bright and highly efficient inorganic based perovskite light-emitting diodes. Nat Commun. 2017; 8:15640. PMC: 5467226. DOI: 10.1038/ncomms15640. View