Is Incineration the Terminator of Plastics and Microplastics?

It is widely accepted that incineration can permanently eliminate plastic waste. However, unburned material still exists in the bottom ash that is a solid residue from incinerators. In this study, microplastics exacted from bottom ash in 12 mass burn incinerators, one bottom ash disposal center and four fluidized bed incinerators were identified by micro-Fourier transform infrared spectroscopy. The results showed that bottom ash was a neglected microplastics source with an abundance of 1.9-565 n/kg, which indicated that per metric ton waste produce 360 to 102,000 microplastic particles after incineration. Nine types of plastics were identified, of which polypropylene and polystyrene were the predominant types. Microplastics sized between 50 μm and 1 mm accounted for 74 %. Granules, fragments, film, and fibers accounted for 43 %, 34 %, 18 %, and 5 % of the microplastics, respectively. The abundance of microplastics differed significantly with whether the local waste was source-separated, the local gross domestic product per capita, and the types of furnace. The global microplastics emission from incineration bottom ash was then estimated. Our observations provide empirical evidence proving that incineration is not the terminator of plastic waste, and bottom ash is a potential source of microplastics released into the environment.