» Articles » PMID: 32369968

Phosphoric Acid Activated Carbon from Waste Sawdust for Adsorptive Removal of Reactive Orange 16: Equilibrium Modelling and Thermodynamic Analysis

Overview
Journal Molecules
Publisher MDPI
Specialty Biology
Date 2020 May 7
PMID 32369968
Citations 6
Authors
Affiliations
Soon will be listed here.
Abstract

Waste wood biomass as precursor for manufacturing activated carbon (AC) can provide a solution to ever increasing global water quality concerns. In our current work, derived phosphoric acid-treated AC (MA-AC400) was manufactured at a laboratory scale. This novel MA-AC400 was tested for RO16 dye removal performance as a function of contact time, adsorbent dosage, pH, temperature and initial dye concentration in a batch scale arrangement. MA-AC400 was characterized via scanning electron microscopy, energy dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, dynamic light scattering (DLS) and fluorescence spectroscopy. MA-AC400 is characterized as mesoporous with BET surface area of 293.13 m g and average pore width of 20.33 Å. pH and Boehm titration confirm the acidic surface charges with dominance of phenolic functional groups. The average DLS particle size of MA-AC400 was found in the narrow range of 0.12 to 0.30 µm and this polydispersity was confirmed with multiple excitation fluorescence wavelengths. MA-AC400 showed equilibrium adsorption efficiency of 97.8% for RO16 dye at its initial concentration of 30 mg L and adsorbent dose of 1 g L. Thermodynamic study endorsed the spontaneous, favorable, irreversible and exothermic process for RO16 adsorption onto MA-AC400. Equilibrium adsorption data was better explained by Langmuir with high goodness of fit (R, 0.9964) and this fitness was endorsed with lower error functions. The kinetics data was found well fitted to pseudo-second order (PSO), and intra-particle diffusion kinetic models. Increasing diffusion constant values confirm the intraparticle diffusion at higher RO16 initial concentration and reverse was true for PSO chemisorption kinetics. MA-AC400 exhibited low desorption with studied eluents and its cost was calculated to be $8.36/kg.

Citing Articles

Statistics design for the synthesis optimization of lignin-sulfonate sulfur-doped mesoporous carbon materials: promising candidates as adsorbents and supercapacitors materials.

Dos Reis G, Petnikota S, de Oliveira H, de Brum I, Thyrel M, Dotto G Sci Rep. 2024; 14(1):23354.

PMID: 39375539 PMC: 11458902. DOI: 10.1038/s41598-024-75003-1.


Visible Light-Induced Reactive Yellow 145 Discoloration: Structural and Photocatalytic Studies of Graphene Quantum Dot-Incorporated TiO.

Fatima S, Ceesay A, Saqib Khan M, Sarwar R, Bilal M, Uddin J ACS Omega. 2023; 8(3):3007-3016.

PMID: 36713734 PMC: 9878638. DOI: 10.1021/acsomega.2c05805.


Low-cost treated lignocellulosic biomass waste supported with FeCl/Zn(NO) for water decolorization.

Kheradmand A, Negarestani M, Mollahosseini A, Shayesteh H, Farimaniraad H Sci Rep. 2022; 12(1):16442.

PMID: 36180518 PMC: 9525308. DOI: 10.1038/s41598-022-20883-4.


MIL-101 (Fe) @Ag Rapid Synergistic Antimicrobial and Biosafety Evaluation of Nanomaterials.

Li X, Zheng H, Chen J, Xu M, Bai Y, Liu T Molecules. 2022; 27(11).

PMID: 35684436 PMC: 9182184. DOI: 10.3390/molecules27113497.


Leaf Extract-Assisted Green Synthesis of Silver Nanoparticles and Nano-Adsorbents Having Potential in Ultrasound-Assisted Adsorptive Removal of Methylene Blue Dye from Wastewater and Antimicrobial Activity.

Sultan M, Siddique M, Khan R, Fallatah A, Fatima N, Shahzadi I Materials (Basel). 2022; 15(5).

PMID: 35268867 PMC: 8911476. DOI: 10.3390/ma15051637.


References
1.
Dhiman N, Markandeya , Singh A, Verma N, Ajaria N, Patnaik S . Statistical optimization and artificial neural network modeling for acridine orange dye degradation using in-situ synthesized polymer capped ZnO nanoparticles. J Colloid Interface Sci. 2017; 493:295-306. DOI: 10.1016/j.jcis.2017.01.042. View

2.
Kumar K . Comparative analysis of linear and non-linear method of estimating the sorption isotherm parameters for malachite green onto activated carbon. J Hazard Mater. 2006; 136(2):197-202. DOI: 10.1016/j.jhazmat.2005.09.018. View

3.
Ghodbane I, Hamdaoui O . Removal of mercury(II) from aqueous media using eucalyptus bark: Kinetic and equilibrium studies. J Hazard Mater. 2008; 160(2-3):301-9. DOI: 10.1016/j.jhazmat.2008.02.116. View

4.
Wang X, Li Z, Tao S . Removal of chromium (VI) from aqueous solution using walnut hull. J Environ Manage. 2008; 90(2):721-9. DOI: 10.1016/j.jenvman.2008.01.011. View

5.
Muthukkumaran A, Aravamudan K . Combined Homogeneous Surface Diffusion Model - Design of experiments approach to optimize dye adsorption considering both equilibrium and kinetic aspects. J Environ Manage. 2017; 204(Pt 1):424-435. DOI: 10.1016/j.jenvman.2017.09.010. View