» Articles » PMID: 31905835

Solidification of Municipal Solid Waste Incineration Fly Ash Through Co-Mechanical Treatment with Circulation Fluidized Bed Combustion Fly Ash

Overview
Publisher MDPI
Date 2020 Jan 8
PMID 31905835
Citations 1
Authors
Affiliations
Soon will be listed here.
Abstract

This study aims to explore the solidification performance of municipal solid waste incineration fly ash (MSWIFA) through co-mechanical treatment with circulation fluidized bed combustion fly ash (CFBCFA). The mineral characterization, physical properties, and leaching resistance of the solidified bodies are investigated by X-ray diffraction spectroscopy (XRD), Fourier transform infrared spectroscopy (FT-IR), Thermogravimetry-differential thermal analysis (TG-DTA), compressive strength, porosity, and leaching test, respectively. C-S-H, ettringite (AFt), and Friedel's salt (FS) are the predominant hydrate products in the CFBCFA based solidified bodies, which are similar to the cement based solidified bodies. However, CFBCFA based solidified bodies exhibit higher compressive strength (36.7 MPa) than cement based solidified bodies (11.28 MPa), attributing to the three reasons: lower porosity and more compact internal structure of CFBCFA based solidified bodies; large amounts of Ca(OH) originating from MSWIFA are conducive to promoting the hydration reaction extent and compressive strength of the CFBCFA based solidified bodies; excessive Ca(OH) would cause compressive strength deterioration for the cement based solidified bodies. The heavy metals (Zn, Cu, Cr, Cd, and Pb) concentrations in the extraction solution of the CFBCFA based solidified bodies are far below the requirements of Chinese National Standard GB 5085.3-2007. The solidification of MSWIFA through co-mechanical treatment could be an ideal substitute for cement solidification technology.

Citing Articles

Solidification Mechanism of Pb and Cd in S-Enriched Alkali-Activated Municipal Solid Waste Incineration Fly Ash.

Xue Q, Ji Y, Ma Z, Zhang Z, Xu Z Materials (Basel). 2023; 16(10).

PMID: 37241355 PMC: 10263213. DOI: 10.3390/ma16103728.

References
1.
Benassi L, Dalipi R, Consigli V, Pasquali M, Borgese L, Depero L . Integrated management of ash from industrial and domestic combustion: a new sustainable approach for reducing greenhouse gas emissions from energy conversion. Environ Sci Pollut Res Int. 2017; 24(17):14834-14846. DOI: 10.1007/s11356-017-9037-y. View

2.
Sobiecka E, Obraniak A, Antizar-Ladislao B . Influence of mixture ratio and pH to solidification/stabilization process of hospital solid waste incineration ash in Portland cement. Chemosphere. 2014; 111:18-23. DOI: 10.1016/j.chemosphere.2014.03.057. View

3.
Zhao S, Chen Z, Shen J, Kang J, Zhang J, Shen Y . Leaching mechanisms of constituents from fly ash under the influence of humic acid. J Hazard Mater. 2016; 321:647-660. DOI: 10.1016/j.jhazmat.2016.09.054. View

4.
Luna Galiano Y, Pereira C, Vale J . Stabilization/solidification of a municipal solid waste incineration residue using fly ash-based geopolymers. J Hazard Mater. 2010; 185(1):373-81. DOI: 10.1016/j.jhazmat.2010.08.127. View

5.
Zhen G, Lu X, Zhao Y, Niu J, Chai X, Su L . Characterization of controlled low-strength material obtained from dewatered sludge and refuse incineration bottom ash: mechanical and microstructural perspectives. J Environ Manage. 2013; 129:183-9. DOI: 10.1016/j.jenvman.2013.07.008. View