Ozden M, Liu X, Wilkinson T, Ustun-Yavuz M, Morley N
Heliyon. 2024; 10(15):e35047.
PMID: 39165969
PMC: 11334866.
DOI: 10.1016/j.heliyon.2024.e35047.
Han Y, Chen H, Sun Y, Liu J, Wei S, Xie B
Nat Commun. 2024; 15(1):6486.
PMID: 39090088
PMC: 11294451.
DOI: 10.1038/s41467-024-49606-1.
Kam D, Rulf O, Reisinger A, Lieberman R, Magdassi S
Nat Commun. 2024; 15(1):2285.
PMID: 38480705
PMC: 10937977.
DOI: 10.1038/s41467-024-46532-0.
Guirguis D, Tucker C, Beuth J
Nat Commun. 2024; 15(1):582.
PMID: 38233405
PMC: 10794417.
DOI: 10.1038/s41467-024-44783-5.
Hamidi Nasab M, Masinelli G, de Formanoir C, Schlenger L, Van Petegem S, Esmaeilzadeh R
Nat Commun. 2023; 14(1):8008.
PMID: 38052793
PMC: 10697982.
DOI: 10.1038/s41467-023-43371-3.
Solute trapping and non-equilibrium microstructure during rapid solidification of additive manufacturing.
Ren N, Li J, Zhang R, Panwisawas C, Xia M, Dong H
Nat Commun. 2023; 14(1):7990.
PMID: 38042908
PMC: 10693635.
DOI: 10.1038/s41467-023-43563-x.
A Review of Computational Approaches to the Microstructure-Informed Mechanical Modelling of Metals Produced by Powder Bed Fusion Additive Manufacturing.
Zinovieva O, Romanova V, Dymnich E, Zinoviev A, Balokhonov R
Materials (Basel). 2023; 16(19).
PMID: 37834596
PMC: 10573704.
DOI: 10.3390/ma16196459.
The role of internal defects on anisotropic tensile failure of L-PBF AlSi10Mg alloys.
Wu Z, Wu S, Gao X, Lin Y, Xue Y, Withers P
Sci Rep. 2023; 13(1):14681.
PMID: 37673912
PMC: 10482850.
DOI: 10.1038/s41598-023-39948-z.
Image Processing Approach to Investigate the Correlation between Machining Parameters and Burr Formation in Micro-Milling Processes of Selective-Laser-Melted AISI 316L.
Akkoyun F, Cevik Z, Ozsoy K, Ercetin A, Arpaci I
Micromachines (Basel). 2023; 14(7).
PMID: 37512686
PMC: 10385879.
DOI: 10.3390/mi14071376.
Radial bimetallic structures via wire arc directed energy deposition-based additive manufacturing.
Squires L, Roberts E, Bandyopadhyay A
Nat Commun. 2023; 14(1):3544.
PMID: 37349308
PMC: 10287757.
DOI: 10.1038/s41467-023-39230-w.
3D Printing of Copper Using Water-Based Colloids and Reductive Sintering.
Airoldi L, Brucculeri R, Baldini P, Pini F, Vigani B, Rossi S
3D Print Addit Manuf. 2023; 10(3):559-568.
PMID: 37346181
PMC: 10280196.
DOI: 10.1089/3dp.2021.0248.
Transforming Industrial Manipulators via Kinesthetic Guidance for Automated Inspection of Complex Geometries.
Loukas C, Vasilev M, Zimmerman R, K W Vithanage R, Mohseni E, MacLeod C
Sensors (Basel). 2023; 23(7).
PMID: 37050817
PMC: 10099101.
DOI: 10.3390/s23073757.
Ongoing Challenges of Laser-Based Powder Bed Fusion Processing of Al Alloys and Potential Solutions from the Literature-A Review.
Martucci A, Aversa A, Lombardi M
Materials (Basel). 2023; 16(3).
PMID: 36770091
PMC: 9921184.
DOI: 10.3390/ma16031084.
Multiscale hierarchical and heterogeneous mechanical response of additively manufactured novel Al alloy investigated by high-resolution nanoindentation mapping.
Dhal A, Thapliyal S, Gaddam S, Agrawal P, Mishra R
Sci Rep. 2022; 12(1):18344.
PMID: 36316407
PMC: 9622702.
DOI: 10.1038/s41598-022-23083-2.
A Simulation Study on the Effect of Residual Stress on the Multi-Layer Selective Laser Melting Processes Considering Solid-State Phase Transformation.
Li X, Zhang M, Qi J, Yang Z, Jiao Z
Materials (Basel). 2022; 15(20).
PMID: 36295243
PMC: 9609282.
DOI: 10.3390/ma15207175.
Printability and microstructure of directed energy deposited SS316l-IN718 multi-material: numerical modeling and experimental analysis.
Ghanavati R, Naffakh-Moosavy H, Moradi M, Eshraghi M
Sci Rep. 2022; 12(1):16600.
PMID: 36198755
PMC: 9534844.
DOI: 10.1038/s41598-022-21077-8.
Collaborative Robotic Wire + Arc Additive Manufacture and Sensor-Enabled In-Process Ultrasonic Non-Destructive Evaluation.
Zimermann R, Mohseni E, Vasilev M, Loukas C, K W Vithanage R, MacLeod C
Sensors (Basel). 2022; 22(11).
PMID: 35684823
PMC: 9185492.
DOI: 10.3390/s22114203.
Performance of High-Layer-Thickness Ti6Al4V Fabricated by Electron Beam Powder Bed Fusion under Different Accelerating Voltage Values.
Li H, Liang X, Li Y, Lin F
Materials (Basel). 2022; 15(5).
PMID: 35269109
PMC: 8911719.
DOI: 10.3390/ma15051878.
Main Applications and Recent Research Progresses of Additive Manufacturing in Dentistry.
Huang G, Wu L, Hu J, Zhou X, He F, Wan L
Biomed Res Int. 2022; 2022:5530188.
PMID: 35252451
PMC: 8894006.
DOI: 10.1155/2022/5530188.
Laser Melting Deposition Additive Manufacturing of Ti6Al4V Biomedical Alloy: Mesoscopic In-Situ Flow Field Mapping via Computational Fluid Dynamics and Analytical Modelling with Empirical Testing.
Mahmood M, Ur Rehman A, Pitir F, Salamci M, Mihailescu I
Materials (Basel). 2021; 14(24).
PMID: 34947357
PMC: 8705474.
DOI: 10.3390/ma14247749.
