Oxygen Consumption in Human, Tissue-engineered Myobundles During Basal and Electrical Stimulation Conditions
Overview
Affiliations
During three-dimensional culture of skeletal muscle , electrical stimulation provides an important cue to enhance skeletal muscle mimicry of the structure and function. However, increased respiration can cause oxygen transport limitations in these avascular three-dimensional constructs, leading to a hypoxic, necrotic core, or nonuniform cell distributions in larger constructs. To enhance oxygen transport with convection, oxygen concentrations were measured using an optical sensor at the inlet and outlet of an 80 l fluid volume microphysiological system (MPS) flow chamber containing three-dimensional human skeletal muscle myobundles. Finite element model simulations of convection around myobundles and oxygen metabolism by the myobundles in the 80 l MPS flow chamber agreed well with the oxygen consumption rate (OCR) at different flow rates, suggesting that under basal conditions, mass transfer limitations were negligible for flow rates above 1.5 l s. To accommodate electrodes for electrical stimulation, a modified 450 l chamber was constructed. Electrical stimulation for 30 min increased the measured rate of oxygen consumption by the myobundles to slightly over 2 times the basal OCR. Model simulations indicate that mass transfer limitations were significant during electrical stimulation and, in the absence of mass transfer limitations, electrical stimulation induced about a 20-fold increase in the maximum rate of oxygen consumption. The results indicate that simulated exercise conditions increase respiration of skeletal muscle and mass transfer limitations reduce the measured levels of oxygen uptake, which may affect previous studies that model exercise with engineered muscle.
Ajalik R, Alenchery R, Cognetti J, Zhang V, McGrath J, Miller B Front Bioeng Biotechnol. 2022; 10:846230.
PMID: 35360391 PMC: 8964284. DOI: 10.3389/fbioe.2022.846230.
Li W, Tsai A, Intaglietta M, Tartakovsky D J Appl Physiol (1985). 2021; 131(6):1815-1823.
PMID: 34647829 PMC: 8714982. DOI: 10.1152/japplphysiol.00524.2021.
Replace and repair: Biomimetic bioprinting for effective muscle engineering.
Blake C, Massey O, Boyd-Moss M, Firipis K, Rifai A, Franks S APL Bioeng. 2021; 5(3):031502.
PMID: 34258499 PMC: 8270648. DOI: 10.1063/5.0040764.
Microphysiological systems: What it takes for community adoption.
Hargrove-Grimes P, Low L, Tagle D Exp Biol Med (Maywood). 2021; 246(12):1435-1446.
PMID: 33899539 PMC: 8243212. DOI: 10.1177/15353702211008872.
Building Biomimetic Potency Tests for Islet Transplantation.
Glieberman A, Pope B, Melton D, Parker K Diabetes. 2021; 70(2):347-363.
PMID: 33472944 PMC: 7881865. DOI: 10.2337/db20-0297.