» Articles » PMID: 30833877

The Preparation of Carbon Nanofillers and Their Role on the Performance of Variable Polymer Nanocomposites

Overview
Date 2019 Mar 6
PMID 30833877
Citations 17
Authors
Affiliations
Soon will be listed here.
Abstract

New synergic behavior is always inspiring scientists toward the formation of nanocomposites aiming at getting advanced materials with superior performance and/or novel properties. Carbon nanotubes (CNT), graphene, fullerene, and graphite as carbon-based are great fillers for polymeric materials. The presence of these materials in the polymeric matrix would render it several characteristics, such as electrical and thermal conductivity, magnetic, mechanical, and as sensor materials for pressure and other environmental changes. This review presents the most recent works in the use of CNT, graphene, fullerene, and graphite as filler in different polymeric matrixes. The primary emphasis of this review is on CNT preparation and its composites formation, while others carbon-based nano-fillers are also introduced. The methods of making polymer nanocomposites using these fillers and their impact on the properties obtained are also presented and discussed.

Citing Articles

The protagonist of contemporary and emerging nanotechnology-based theranostics and therapeutic approaches in reshaping intensive care unit.

Xie L, Chen Y Saudi Med J. 2024; 45(8):759-770.

PMID: 39074899 PMC: 11288488. DOI: 10.15537/smj.2024.45.8.20240069.


The Impact of ZnO Nanofillers on the Mechanical and Anti-Corrosion Performances of Epoxy Composites.

Somoghi R, Semenescu A, Pasare V, Chivu O, Nitoi D, Marcu D Polymers (Basel). 2024; 16(14).

PMID: 39065371 PMC: 11280588. DOI: 10.3390/polym16142054.


A Review of EPDM (Ethylene Propylene Diene Monomer) Rubber-Based Nanocomposites: Properties and Progress.

Costa N, Hiranobe C, Cardim H, Dognani G, Sanchez J, Carvalho J Polymers (Basel). 2024; 16(12).

PMID: 38932070 PMC: 11207359. DOI: 10.3390/polym16121720.


Effect of methyl methacrylate concentrations on surface and thermal analysis of composite polymer polymethylmethacrylates with mesogen reactive RM82.

Afrizal , Yusmaniar , Valentino B, Riswoko A, Khairunnisa Gumilar K Des Monomers Polym. 2024; 27(1):1-11.

PMID: 38586248 PMC: 10997352. DOI: 10.1080/15685551.2024.2336657.


Advanced Polymeric Nanocomposite Membranes for Water and Wastewater Treatment: A Comprehensive Review.

Sahu A, Dosi R, Kwiatkowski C, Schmal S, Poler J Polymers (Basel). 2023; 15(3).

PMID: 36771842 PMC: 9920371. DOI: 10.3390/polym15030540.


References
1.
Murariu M, Dubois P . PLA composites: From production to properties. Adv Drug Deliv Rev. 2016; 107:17-46. DOI: 10.1016/j.addr.2016.04.003. View

2.
Quadri T, Olasunkanmi L, Fayemi O, Solomon M, Ebenso E . Zinc Oxide Nanocomposites of Selected Polymers: Synthesis, Characterization, and Corrosion Inhibition Studies on Mild Steel in HCl Solution. ACS Omega. 2019; 2(11):8421-8437. PMC: 6645236. DOI: 10.1021/acsomega.7b01385. View

3.
Kalakonda P, Banne S . Thermomechanical properties of PMMA and modified SWCNT composites. Nanotechnol Sci Appl. 2017; 10:45-52. PMC: 5308594. DOI: 10.2147/NSA.S123734. View

4.
Kumar M, Ando Y . Chemical vapor deposition of carbon nanotubes: a review on growth mechanism and mass production. J Nanosci Nanotechnol. 2010; 10(6):3739-58. DOI: 10.1166/jnn.2010.2939. View

5.
Chiang W, Sankaran R . Linking catalyst composition to chirality distributions of as-grown single-walled carbon nanotubes by tuning Ni(x)Fe(1-x) nanoparticles. Nat Mater. 2009; 8(11):882-6. DOI: 10.1038/nmat2531. View