» Articles » PMID: 30318157

Characteristics and Mechanisms of Cadmium Adsorption Onto Biogenic Aragonite Shells-derived Biosorbent: Batch and Column Studies

Overview
Date 2018 Oct 16
PMID 30318157
Citations 9
Authors
Affiliations
Soon will be listed here.
Abstract

Calcium carbonate (CaCO)-enriched biomaterial derived from freshwater mussel shells (FMS) was used as a non-porous biosorbent to explore the characteristics and mechanisms of cadmium adsorption in aqueous solution. The adsorption mechanism was proposed by comparing the FMS properties before and after adsorption alongside various adsorption studies. The FMS biosorbent was characterized using nitrogen adsorption/desorption isotherm, X-ray diffraction, scanning electron microscopy with energy dispersive spectroscopy, Fourier-transform infrared spectroscopy, and point of zero charge. The results of batch experiments indicated that FMS possessed an excellent affinity to Cd(II) ions within solutions pH higher than 4.0. An increase in ionic strength resulted in a significant decrease in the amount of Cd(II) adsorbed onto FMS. Kinetic study demonstrated that the adsorption process quickly reached equilibrium at approximately 60 min. The FMS biosorbent exhibited the Langmuir maximum adsorption capacity as follows: 18.2 mg/g at 10 °C < 26.0 mg/g at 30 °C < 28.6 mg/g at 50 °C. The Cd(II) adsorption process was irreversible, spontaneous (-ΔG°), endothermic (+ΔH°), and more random (+ΔS°). Selective order (mmol/g) of metal cations followed as Pb > Cd > Cu > Cr > Zn. For column experiments, the highest Thomas adsorption capacity (7.86 mg/g) was achieved at a flow rate (9 mL/min), initial Cd(II) concentration (10 mg/L), and bed height (5 cm). The Cd(II) removal by FMS was regarded as non-activated chemisorption that occurred very rapidly (even at a low temperature) with a low magnitude of activation energy. Primary adsorption mechanism was surface precipitation. Cadmium precipitated in the primary (Cd,Ca)CO form with a calcite-type structure on the FMS surface. A crust of rhombohedral crystals on the substrate was observed by SEM. Freshwater mussel shells have the potential as a renewable adsorbent to remove cadmium from water.

Citing Articles

RSM optimization studies for cadmium ions adsorption onto pristine and acid-modified kaolinite clay.

Mustapha L, Yusuff A, Dim P Heliyon. 2023; 9(8):e18634.

PMID: 37554808 PMC: 10404677. DOI: 10.1016/j.heliyon.2023.e18634.


Adsorption of Cd onto apatite surface: Equilibrium, kinetics and thermodynamic studies.

Ofudje E, Sodiya E, Olanrele O, Akinwunmi F Heliyon. 2023; 9(2):e12971.

PMID: 36747536 PMC: 9898600. DOI: 10.1016/j.heliyon.2023.e12971.


Adsorption of Heavy Metals Ions from Mining Metallurgical Tailings Leachate Using a Shell-Based Adsorbent: Characterization, Kinetics and Isotherm Studies.

Fernandez Perez B, Ayala Espina J, Fernandez Gonzalez M Materials (Basel). 2022; 15(15).

PMID: 35955251 PMC: 9370030. DOI: 10.3390/ma15155315.


Adsorption kinetics and isotherms of binary metal ion aqueous solution using untreated venus shell.

Khamwichit A, Dechapanya W, Dechapanya W Heliyon. 2022; 8(6):e09610.

PMID: 35706950 PMC: 9189894. DOI: 10.1016/j.heliyon.2022.e09610.


Heavy metal removal from aqueous systems using hydroxyapatite nanocrystals derived from clam shells.

Nunez D, Serrano J, Mancisidor A, Elgueta E, Varaprasad K, Oyarzun P RSC Adv. 2022; 9(40):22883-22890.

PMID: 35514475 PMC: 9067131. DOI: 10.1039/c9ra04198b.