» Articles » PMID: 30006811

Influence of Ag Nanoparticles with Different Sizes and Concentrations Embedded in a TiO Compact Layer on the Conversion Efficiency of Perovskite Solar Cells

Overview
Publisher Springer
Specialty Biotechnology
Date 2018 Jul 15
PMID 30006811
Citations 8
Authors
Affiliations
Soon will be listed here.
Abstract

In this study, Ag nanoparticles with diverse particle size and concentration, fabricated via the polyol method, were embedded in a TiO compact film to improve the power conversion efficiency of perovskite solar cells. Obtained results showed that Ag nanoparticles embedded in the TiO compact film do not affect the crystal structure of TiO, while the size of the Ag nanoparticles can strongly influence the light absorption capacity of perovskite materials. However, the absorption intensity and power conversion efficiency of perovskite cells decreased with the increase in size of Ag nanoparticles. The amount of Ag nanoparticles was also an important factor for the performance of perovskite solar cells, and Ag nanoparticles in the compact layer were optimized to measure 10 nm in diameter, being embedded at a molar ratio of 1.5% (Ag:Ti = 1.5 mol%). Compared with hole-conductor-free perovskite solar cells that use carbon as counter electrodes, without Ag nanoparticles incorporated in the compact film, the enhanced efficiency of cells developed in this study can be mainly ascribed to the accelerated charge transfer, decreased charge recombination, and enhanced light absorption of the perovskite material in the visible region.

Citing Articles

Improving the Efficiency of Bulk-heterojunction Solar Cells through Plasmonic Enhancement within a Silver Nanoparticle-Loaded Optical Spacer Layer.

Ibrahem M, Rasheed B, Canimkurbey B, Adawi A, Bouillard J, ONeill M ACS Omega. 2025; 10(3):2849-2857.

PMID: 39895708 PMC: 11780413. DOI: 10.1021/acsomega.4c08801.


Plasmonics Meets Perovskite Photovoltaics: Innovations and Challenges in Boosting Efficiency.

Wang C, Wang X, Luo B, Shi X, Shen X Molecules. 2024; 29(21).

PMID: 39519732 PMC: 11547589. DOI: 10.3390/molecules29215091.


Models of light absorption enhancement in perovskite solar cells by plasmonic nanoparticles.

Zheng D, Pauporte T, Schwob C, Coolen L Exploration (Beijing). 2024; 4(1):20220146.

PMID: 38854487 PMC: 10867376. DOI: 10.1002/EXP.20220146.


Morphological investigation and 3D simulation of plasmonic nanostructures to improve the efficiency of perovskite solar cells.

Mohammadi M, Eskandari M, Fathi D Sci Rep. 2023; 13(1):18584.

PMID: 37903845 PMC: 10616107. DOI: 10.1038/s41598-023-46098-9.


Routes for Metallization of Perovskite Solar Cells.

Jacak J, Jacak W Materials (Basel). 2022; 15(6).

PMID: 35329705 PMC: 8948851. DOI: 10.3390/ma15062254.


References
1.
Yella A, Heiniger L, Gao P, Nazeeruddin M, Gratzel M . Nanocrystalline rutile electron extraction layer enables low-temperature solution processed perovskite photovoltaics with 13.7% efficiency. Nano Lett. 2014; 14(5):2591-6. DOI: 10.1021/nl500399m. View

2.
Ahn N, Son D, Jang I, Kang S, Choi M, Park N . Highly Reproducible Perovskite Solar Cells with Average Efficiency of 18.3% and Best Efficiency of 19.7% Fabricated via Lewis Base Adduct of Lead(II) Iodide. J Am Chem Soc. 2015; 137(27):8696-9. DOI: 10.1021/jacs.5b04930. View

3.
Yang W, Park B, Jung E, Jeon N, Kim Y, Lee D . Iodide management in formamidinium-lead-halide-based perovskite layers for efficient solar cells. Science. 2017; 356(6345):1376-1379. DOI: 10.1126/science.aan2301. View

4.
Kim D, Jeong S, Moon J . Synthesis of silver nanoparticles using the polyol process and the influence of precursor injection. Nanotechnology. 2011; 17(16):4019-24. DOI: 10.1088/0957-4484/17/16/004. View

5.
Zhang W, Saliba M, Stranks S, Sun Y, Shi X, Wiesner U . Enhancement of perovskite-based solar cells employing core-shell metal nanoparticles. Nano Lett. 2013; 13(9):4505-10. DOI: 10.1021/nl4024287. View