» Articles » PMID: 29606792

Ultrahigh Vacuum Dc Magnetron Sputter-deposition of Epitaxial Pd(111)/AlO(0001) Thin Films

Overview
Date 2018 Apr 3
PMID 29606792
Citations 1
Authors
Affiliations
Soon will be listed here.
Abstract

Pd(111) thin films, ∼245 nm thick, are deposited on AlO(0001) substrates at ≈0.5, where is the Pd melting point, by ultrahigh vacuum dc magnetron sputtering of Pd target in pure Ar discharges. Auger electron spectra and low-energy electron diffraction patterns acquired from the as-deposited samples reveal that the surfaces are compositionally pure 111-oriented Pd. Double-axis x-ray diffraction (XRD) ω-2θ scans show only the set of Pd 111 peaks from the film. In triple-axis high-resolution XRD, the full width at half maximum intensity Γ of the Pd 111 ω-rocking curve is 630 arc sec. XRD 111 pole figure obtained from the sample revealed six peaks 60°-apart at a tilt angles corresponding to Pd 111 reflections. XRD ϕ scans show six 60°-rotated 111 peaks of Pd at the same ϕ angles for 11[Formula: see text]3 of AlO based on which the epitaxial crystallographic relationships between the film and the substrate are determined as [Formula: see text]ǁ[Formula: see text] with two in-plane orientations of [Formula: see text]ǁ[Formula: see text] and [Formula: see text]ǁ[Formula: see text]. Using triple axis symmetric and asymmetric reciprocal space maps, interplanar spacings of out-of-plane (111) and in-plane (11[Formula: see text]) are found to be 0.2242 ± 0.0003 and 0.1591 ± 0.0003 nm, respectively. These values are 0.18% lower than 0.2246 nm for (111) and the same, within the measurement uncertainties, as 0.1588 nm for (11[Formula: see text]) calculated from the bulk Pd lattice parameter, suggesting a small out-of-plane compressive strain and an in-plane tensile strain related to the thermal strain upon cooling the sample from the deposition temperature to room temperature. High-resolution cross-sectional transmission electron microscopy coupled with energy dispersive x-ray spectra obtained from the Pd(111)/AlO(0001) samples indicate that the Pd-AlO interfaces are essentially atomically abrupt and dislocation-free. These results demonstrate the growth of epitaxial Pd thin films with (111) out-of-plane orientation with low mosaicity on AlO(0001).

Citing Articles

Ultra-high vacuum dc magnetron sputter-deposition of 0001-textured trigonal α-TaC/AlO(0001) thin films.

Tanaka K, Aleman A, Zaid H, Liao M, Hojo K, Wang Y Materialia (Oxf). 2022; 13.

PMID: 36408369 PMC: 9671384. DOI: 10.1016/j.mtla.2020.100838.

References
1.
Favier F, Walter E, Zach M, Benter T, Penner R . Hydrogen sensors and switches from electrodeposited palladium mesowire arrays. Science. 2001; 293(5538):2227-31. DOI: 10.1126/science.1063189. View

2.
Kwon S, Ciobanu C, Petrova V, Shenoy V, Bareno J, Gambin V . Growth of semiconducting graphene on palladium. Nano Lett. 2009; 9(12):3985-90. DOI: 10.1021/nl902140j. View

3.
Xia F, Perebeinos V, Lin Y, Wu Y, Avouris P . The origins and limits of metal-graphene junction resistance. Nat Nanotechnol. 2011; 6(3):179-84. DOI: 10.1038/nnano.2011.6. View

4.
Leong G, Ebnonnasir A, Schulze M, Strand M, Ngo C, Maloney D . Shape-directional growth of Pt and Pd nanoparticles. Nanoscale. 2014; 6(19):11364-71. DOI: 10.1039/c4nr02755h. View