Enhanced Photovoltaic Properties of Bulk Heterojunction Organic Photovoltaic Devices by an Addition of a Low Band Gap Conjugated Polymer

Overview

Journal Materials (Basel)

Publisher MDPI

Date 2017 Aug 5

PMID 28774116

Authors

Eui Jin Lee

Min Hee Choi

Doo Kyung Moon

Affiliations

Soon will be listed here.

Abstract

In this study, we fabricated organic photovoltaics (OPVs) by introducing the polymer additive HTh6BT into the photoactive layer of a poly(3-hexylthiophene):phenyl-C-butyric acid methyl ester (P3HT:PCBM) system. The HTh6BT had a relatively low band gap energy of 1.65 eV and a molecular and crystalline structure similar to that of P3HT. In the photoactive layer, the HTh6BT and P3HT can both act as donors. In such parallel-type bulk heterojunctions, each donor can form excitons and generate charges while being separated from the donor/acceptor interface. Changes in the photovoltaic property of the OPV device by the addition of HTh6BT were evaluated, and the optical characteristics of the photoactive layer, as well as the surface morphology, polymer ordering, and crystallinity of the P3HT:PCBM film were analyzed. Compared to a device without HTh6BT, all short-circuit current densities, open-circuit voltages, and fill factors were enhanced, leading to the enhancement of the power conversion efficiency by 36%.

References

Zhou H, Zhang Y, Mai C, Collins S, Bazan G, Nguyen T . Polymer homo-tandem solar cells with best efficiency of 11.3%. Adv Mater. 2015; 27(10):1767-73. DOI: 10.1002/adma.201404220. View

Zhang J, Zhang Y, Fang J, Lu K, Wang Z, Ma W . Conjugated Polymer-Small Molecule Alloy Leads to High Efficient Ternary Organic Solar Cells. J Am Chem Soc. 2015; 137(25):8176-83. DOI: 10.1021/jacs.5b03449. View

Flamini R, Marrocchi A, Spalletti A . Quantitative cascade energy transfer in semiconductor thin films. Photochem Photobiol Sci. 2014; 13(7):1031-8. DOI: 10.1039/c4pp00071d. View

You J, Dou L, Yoshimura K, Kato T, Ohya K, Moriarty T . A polymer tandem solar cell with 10.6% power conversion efficiency. Nat Commun. 2013; 4:1446. PMC: 3660643. DOI: 10.1038/ncomms2411. View

Lu L, Chen W, Xu T, Yu L . High-performance ternary blend polymer solar cells involving both energy transfer and hole relay processes. Nat Commun. 2015; 6:7327. PMC: 4468850. DOI: 10.1038/ncomms8327. View

Bura T, Blaskovits J, Leclerc M . Direct (Hetero)arylation Polymerization: Trends and Perspectives. J Am Chem Soc. 2016; 138(32):10056-71. DOI: 10.1021/jacs.6b06237. View

Liao S, Jhuo H, Cheng Y, Chen S . Fullerene derivative-doped zinc oxide nanofilm as the cathode of inverted polymer solar cells with low-bandgap polymer (PTB7-Th) for high performance. Adv Mater. 2013; 25(34):4766-71. DOI: 10.1002/adma.201301476. View

Yang L, Zhou H, Price S, You W . Parallel-like bulk heterojunction polymer solar cells. J Am Chem Soc. 2012; 134(12):5432-5. DOI: 10.1021/ja211597w. View

He Z, Zhong C, Huang X, Wong W, Wu H, Chen L . Simultaneous enhancement of open-circuit voltage, short-circuit current density, and fill factor in polymer solar cells. Adv Mater. 2011; 23(40):4636-43. DOI: 10.1002/adma.201103006. View

10.

Khlyabich P, Burkhart B, Thompson B . Compositional dependence of the open-circuit voltage in ternary blend bulk heterojunction solar cells based on two donor polymers. J Am Chem Soc. 2012; 134(22):9074-7. DOI: 10.1021/ja302935n. View

11.

Lim E, Lee S, Lee K . Improved photovoltaic performance of P3HT:PCBM cells by addition of a low band-gap oligomer. Chem Commun (Camb). 2010; 47(3):914-6. DOI: 10.1039/c0cc03962d. View

12.

Gobalasingham N, Noh S, Howard J, Thompson B . Influence of Surface Energy on Organic Alloy Formation in Ternary Blend Solar Cells Based on Two Donor Polymers. ACS Appl Mater Interfaces. 2016; 8(41):27931-27941. DOI: 10.1021/acsami.6b10144. View

13.

Zhang Y, Deng D, Lu K, Zhang J, Xia B, Zhao Y . Synergistic effect of polymer and small molecules for high-performance ternary organic solar cells. Adv Mater. 2015; 27(6):1071-6. DOI: 10.1002/adma.201404902. View

14.

Liang Y, Xu Z, Xia J, Tsai S, Wu Y, Li G . For the bright future-bulk heterojunction polymer solar cells with power conversion efficiency of 7.4%. Adv Mater. 2010; 22(20):E135-8. DOI: 10.1002/adma.200903528. View