Iacomini A, Sanna D, Mureddu M, Caggiu L, Cau C, Enzo S
Materials (Basel). 2025; 18(5).
PMID: 40077230
PMC: 11901153.
DOI: 10.3390/ma18051004.
Madhanagopal B, Chandrasekaran A
JACS Au. 2025; 5(2):1069-1075.
PMID: 40017770
PMC: 11862946.
DOI: 10.1021/jacsau.4c01204.
Hartings M, Ahmed Z
Nat Rev Chem. 2025; 3(5):305-314.
PMID: 39845774
PMC: 11753264.
DOI: 10.1038/s41570-019-0097-z.
Duru J, Maurer B, Ruff T, Vulic K, Hengsteler J, Girardin S
HardwareX. 2024; 20:e00571.
PMID: 39678521
PMC: 11639333.
DOI: 10.1016/j.ohx.2024.e00571.
Heard D, Deeks S, Lennox A
ACS Cent Sci. 2024; 10(11):2028-2035.
PMID: 39634220
PMC: 11613433.
DOI: 10.1021/acscentsci.4c00988.
Self-Driving Laboratories for Chemistry and Materials Science.
Tom G, Schmid S, Baird S, Cao Y, Darvish K, Hao H
Chem Rev. 2024; 124(16):9633-9732.
PMID: 39137296
PMC: 11363023.
DOI: 10.1021/acs.chemrev.4c00055.
Development of Lab-Scale Continuous Stirred-Tank Reactor as Flow Process Tool for Oxidation Reactions Using Molecular Oxygen.
Gnadinger U, Poier D, Trombini C, Dabros M, Marti R
Org Process Res Dev. 2024; 28(5):1860-1868.
PMID: 38783850
PMC: 11110044.
DOI: 10.1021/acs.oprd.3c00424.
NIRis: A low-cost, versatile imaging system for near-infrared fluorescence detection of phototrophic cell colonies used in research and education.
Franz O, Hakkanen H, Kovanen S, Heikkila-Huhta K, Nissinen R, Ihalainen J
PLoS One. 2024; 19(5):e0287088.
PMID: 38771771
PMC: 11108223.
DOI: 10.1371/journal.pone.0287088.
Multifunction fluorescence open source in vivo/in vitro imaging system (openIVIS).
Branning Jr J, Faughnan K, Tomson A, Bell G, Isbell S, DeGroot A
PLoS One. 2024; 19(3):e0299875.
PMID: 38498588
PMC: 10947658.
DOI: 10.1371/journal.pone.0299875.
Can I benefit from laboratory automation? A decision aid for the successful introduction of laboratory automation.
Rupp N, Ries R, Wienbruch R, Zuchner T
Anal Bioanal Chem. 2023; 416(1):5-19.
PMID: 38030885
PMC: 10758358.
DOI: 10.1007/s00216-023-05038-2.
Time- and distance-resolved robotic imaging of fluid flow in vertical microfluidic strips: a new technique for quantitative, multiparameter measurement of global haemostasis.
Sariyer R, Gill K, Needs S, Hodge D, Reis N, Jones C
Sens Diagn. 2023; 2(6):1623-1637.
PMID: 38013763
PMC: 10633108.
DOI: 10.1039/d3sd00162h.
Open Hardware for Microfluidics: Exploiting Raspberry Pi Singleboard Computer and Camera Systems for Customisable Laboratory Instrumentation.
Sariyer R, Edwards A, Needs S
Biosensors (Basel). 2023; 13(10).
PMID: 37887141
PMC: 10605846.
DOI: 10.3390/bios13100948.
Probing nanopore surface chemistry through real-time measurements of nanopore conductance response to pH changes.
Sheetz B, R Dwyer J
Rev Sci Instrum. 2023; 94(10).
PMID: 37812049
PMC: 10568641.
DOI: 10.1063/5.0155611.
Open source scientific bottle roller.
Mottaghi M, Bai Y, Kulkarni A, Pearce J
HardwareX. 2023; 15:e00445.
PMID: 37795342
PMC: 10545937.
DOI: 10.1016/j.ohx.2023.e00445.
Using Open Neuroscience to Advance Equity in the Pedagogy and Research Infrastructure in Colleges/Universities Still Financially Impacted by COVID-19: The Emergence of a Global Resource Network Aimed at Integrating Neuroscience and Society.
Maia Chagas A, Canli T, Ziadlou D, Forlano P, Samaddar S, Chua E
J Undergrad Neurosci Educ. 2023; 21(2):E2-E7.
PMID: 37588641
PMC: 10426815.
DOI: 10.59390/JVIC5712.
Processes for the 3D Printing of Hydrodynamic Flow-Focusing Devices.
Awate D, Holton S, Meyer K, Juarez J
Micromachines (Basel). 2023; 14(7).
PMID: 37512699
PMC: 10383660.
DOI: 10.3390/mi14071388.
Open-source 3-D printable autoinjector: Design, testing, and regulatory limitations.
Selvaraj A, Kulkarni A, Pearce J
PLoS One. 2023; 18(7):e0288696.
PMID: 37450496
PMC: 10348544.
DOI: 10.1371/journal.pone.0288696.
AC/off-grid photovoltaic powered open-source ball mill.
Mottaghi M, Rahman M, Kulkarni A, Pearce J
HardwareX. 2023; 14:e00423.
PMID: 37188059
PMC: 10176261.
DOI: 10.1016/j.ohx.2023.e00423.
Rapid Bacterial Motility Monitoring Using Inexpensive 3D-Printed OpenFlexure Microscopy Allows Microfluidic Antibiotic Susceptibility Testing.
Diep T, Needs S, Bizley S, Edwards A
Micromachines (Basel). 2022; 13(11).
PMID: 36422401
PMC: 9699482.
DOI: 10.3390/mi13111974.
Simple Preparation of Metal-Impregnated FDM 3D-Printed Structures.
Flores D, Noboa J, Tarapues M, Vizuete K, Debut A, Bejarano L
Micromachines (Basel). 2022; 13(10).
PMID: 36296028
PMC: 9612141.
DOI: 10.3390/mi13101675.