Shear Bond Strengths of Different Adhesive Systems to Biodentine

Overview

Journal ScientificWorldJournal

Publisher Wiley

Specialty Biology

Date 2013 Nov 14

PMID 24222742

Citations 29

Authors

Mesut Enes Odabas

Mehmet Bani

Resmiye Ebru Tirali

Affiliations

Soon will be listed here.

Abstract

The aim of this study was to measure the shear bond strength of different adhesive systems to Biodentine with different time intervals. Eighty specimens of Biodentine were prepared and divided into 8 groups. After 12 minutes, 40 samples were randomly selected and divided into 4 groups of 10 each: group 1: (etch-and-rinse adhesive system) Prime & Bond NT; group 2: (2-step self-etch adhesive system) Clearfil SE Bond; group 3: (1-step self-etch adhesive systems) Clearfil S(3) Bond; group 4: control (no adhesive). After the application of adhesive systems, composite resin was applied over Biodentine. This procedure was repeated 24 hours after mixing additional 40 samples, respectively. Shear bond strengths were measured using a universal testing machine, and the data were subjected to 1-way analysis of variance and Scheffé post hoc test. No significant differences were found between all of the adhesive groups at the same time intervals (12 minutes and 24 hours) (P > .05). Among the two time intervals, the lowest value was obtained for group 1 (etch-and-rinse adhesive) at a 12-minute period, and the highest was obtained for group 2 (two-step self-etch adhesive) at a 24-hour period. The placement of composite resin used with self-etch adhesive systems over Biodentine showed better shear bond strength.

Citing Articles

Bond strength of resin-based restorative materials to fast-setting calcium silicate cement using different resin adhesive systems.

Ranjkesh B, Kopperud H, Lovschall H Eur J Oral Sci. 2024; 132(6):e13025.

PMID: 39462816 PMC: 11602444. DOI: 10.1111/eos.13025.

Immediate and delayed shear bond strength evaluation between root canal sealers and restorative materials: an experimental study.

Alghazaly A, Mirah M, Saleh S BMC Oral Health. 2024; 24(1):1217.

PMID: 39402532 PMC: 11475602. DOI: 10.1186/s12903-024-04993-1.

Comparative evaluations of shear bond strength of mineral trioxide aggregate, Biodentine, and calcium-enriched mixture to bulk-fill flowable composite using three different adhesive systems: An study.

Fatima A, Iftekhar H, Alam S, Tewari R, Andrabi M J Conserv Dent Endod. 2024; 27(7):706-713.

PMID: 39262590 PMC: 11385902. DOI: 10.4103/JCDE.JCDE_192_24.

Delayed vs. immediate placement of restorative materials over Biodentine and RetroMTA: a micro-shear bond strength study.

Celiksoz O, Irmak O BMC Oral Health. 2024; 24(1):130.

PMID: 38273289 PMC: 10811922. DOI: 10.1186/s12903-024-03917-3.

Comparative Evaluation of Shear Bond Strength of Tricalcium Silicate-based Materials to Composite Resin with Two Different Adhesive Systems: An Study.

Kumar V, Showkat I, Manuja N, Chaudhary S, Sinha A, Telgi C Int J Clin Pediatr Dent. 2024; 16(Suppl 3):272-277.

PMID: 38268635 PMC: 10804296. DOI: 10.5005/jp-journals-10005-2687.

References

Zhao W, Wang J, Zhai W, Wang Z, Chang J . The self-setting properties and in vitro bioactivity of tricalcium silicate. Biomaterials. 2005; 26(31):6113-21. DOI: 10.1016/j.biomaterials.2005.04.025. View

Bishara S, Ajlouni R, Laffoon J, Warren J . Effect of a fluoride-releasing self-etch acidic primer on the shear bond strength of orthodontic brackets. Angle Orthod. 2002; 72(3):199-202. DOI: 10.1043/0003-3219(2002)072<0199:EOAFRS>2.0.CO;2. View

Camilleri J . The physical properties of accelerated Portland cement for endodontic use. Int Endod J. 2007; 41(2):151-7. DOI: 10.1111/j.1365-2591.2007.01330.x. View

Lee S, Monsef M, Torabinejad M . Sealing ability of a mineral trioxide aggregate for repair of lateral root perforations. J Endod. 1993; 19(11):541-4. DOI: 10.1016/S0099-2399(06)81282-3. View

Neelakantan P, Grotra D, Subbarao C, Garcia-Godoy F . The shear bond strength of resin-based composite to white mineral trioxide aggregate. J Am Dent Assoc. 2012; 143(8):e40-5. DOI: 10.14219/jada.archive.2012.0302. View

Inoue S, Vargas M, Abe Y, Yoshida Y, Lambrechts P, Vanherle G . Microtensile bond strength of eleven contemporary adhesives to dentin. J Adhes Dent. 2002; 3(3):237-45. View

Cacciafesta V, Sfondrini M, De Angelis M, Scribante A, Klersy C . Effect of water and saliva contamination on shear bond strength of brackets bonded with conventional, hydrophilic, and self-etching primers. Am J Orthod Dentofacial Orthop. 2003; 123(6):633-40. DOI: 10.1016/s0889-5406(03)00198-7. View

de Munck J, Van Meerbeek B, Satoshi I, Vargas M, Yoshida Y, Armstrong S . Microtensile bond strengths of one- and two-step self-etch adhesives to bur-cut enamel and dentin. Am J Dent. 2004; 16(6):414-20. View

Arnold R, Combe E, Warford Jr J . Bonding of stainless steel brackets to enamel with a new self-etching primer. Am J Orthod Dentofacial Orthop. 2002; 122(3):274-6. DOI: 10.1067/mod.2002.125712. View

10.

Tran X, Gorin C, Willig C, Baroukh B, Pellat B, Decup F . Effect of a calcium-silicate-based restorative cement on pulp repair. J Dent Res. 2012; 91(12):1166-71. DOI: 10.1177/0022034512460833. View

11.

Parirokh M, Torabinejad M . Mineral trioxide aggregate: a comprehensive literature review--Part I: chemical, physical, and antibacterial properties. J Endod. 2009; 36(1):16-27. DOI: 10.1016/j.joen.2009.09.006. View

12.

Dorminey J, Dunn W, Taloumis L . Shear bond strength of orthodontic brackets bonded with a modified 1-step etchant-and-primer technique. Am J Orthod Dentofacial Orthop. 2003; 124(4):410-3. DOI: 10.1016/s0889-5406(03)00404-9. View

13.

Bayrak S, Sen Tunc E, Saroglu I, Egilmez T . Shear bond strengths of different adhesive systems to white mineral trioxide aggregate. Dent Mater J. 2009; 28(1):62-7. View

14.

Bouillaguet S, Gysi P, Wataha J, Ciucchi B, Cattani M, Godin C . Bond strength of composite to dentin using conventional, one-step, and self-etching adhesive systems. J Dent. 2001; 29(1):55-61. DOI: 10.1016/s0300-5712(00)00049-x. View

15.

Laurent P, Camps J, De Meo M, Dejou J, About I . Induction of specific cell responses to a Ca(3)SiO(5)-based posterior restorative material. Dent Mater. 2008; 24(11):1486-94. DOI: 10.1016/j.dental.2008.02.020. View

16.

Sen Tunc E, Sonmez I, Bayrak S, Egilmez T . The evaluation of bond strength of a composite and a compomer to white mineral trioxide aggregate with two different bonding systems. J Endod. 2008; 34(5):603-5. DOI: 10.1016/j.joen.2008.02.026. View

17.

Kaaden C, Powers J, Friedl K, Schmalz G . Bond strength of self-etching adhesives to dental hard tissues. Clin Oral Investig. 2002; 6(3):155-60. DOI: 10.1007/s00784-002-0170-7. View

18.

Bishara S, VonWald L, Laffoon J, Warren J . Effect of a self-etch primer/adhesive on the shear bond strength of orthodontic brackets. Am J Orthod Dentofacial Orthop. 2001; 119(6):621-4. DOI: 10.1067/mod.2001.113269. View

19.

Borges M, Matos I, Dias K . Influence of two self-etching primer systems on enamel adhesion. Braz Dent J. 2007; 18(2):113-8. DOI: 10.1590/s0103-64402007000200005. View

20.

Dammaschke T, Gerth H, Zuchner H, Schafer E . Chemical and physical surface and bulk material characterization of white ProRoot MTA and two Portland cements. Dent Mater. 2005; 21(8):731-8. DOI: 10.1016/j.dental.2005.01.019. View