» Articles » PMID: 23835645

Self-assembly of Hierarchical MoSx/CNT Nanocomposites (2<x<3): Towards High Performance Anode Materials for Lithium Ion Batteries

Overview
Journal Sci Rep
Specialty Science
Date 2013 Jul 10
PMID 23835645
Citations 29
Authors
Affiliations
Soon will be listed here.
Abstract

Two dimension (2D) layered molybdenum disulfide (MoS2) has emerged as a promising candidate for the anode material in lithium ion batteries (LIBs). Herein, 2D MoSx (2 ≤ x ≤ 3) nanosheet-coated 1D multiwall carbon nanotubes (MWNTs) nanocomposites with hierarchical architecture were synthesized via a high-throughput solvent thermal method under low temperature at 200°C. The unique hierarchical nanostructures with MWNTs backbone and nanosheets of MoSx have significantly promoted the electrode performance in LIBs. Every single MoSx nanosheet interconnect to MWNTs centers with maximized exposed electrochemical active sites, which significantly enhance ion diffusion efficiency and accommodate volume expansion during the electrochemical reaction. A remarkably high specific capacity (i.e., > 1000 mAh/g) was achieved at the current density of 50 mA g(-1), which is much higher than theoretical numbers for either MWNTs or MoS2 along (~372 and ~670 mAh/g, respectively). We anticipate 2D nanosheets/1D MWNTs nanocomposites will be promising materials in new generation practical LIBs.

Citing Articles

Hydrogen Production and Li-Ion Battery Performance with MoS-SiNWs-SWNTs@ZnONPs Nanocomposites.

Machin A, Cotto M, Marquez F, Diaz-Sanchez J, Polop C, Morant C Nanomaterials (Basel). 2024; 14(23).

PMID: 39683299 PMC: 11643952. DOI: 10.3390/nano14231911.


A 2D hybrid nanocomposite: a promising anode material for lithium-ion batteries at high temperature.

Chandra Sekhar B, Soliman A, Arsalan M, Alsharaeh E Nanoscale Adv. 2024; .

PMID: 39263249 PMC: 11382551. DOI: 10.1039/d4na00424h.


Study of the Rolling Effect on MoS-Carbon Fiber Density and Its Consequences for the Functionality of Li-Ion Batteries.

Wu T, Li X, Chen B, Wang L, Wang J, Chu S Materials (Basel). 2024; 17(12).

PMID: 38930194 PMC: 11204658. DOI: 10.3390/ma17122825.


Nitrogen-doped hollow carbon sphere composite MnO as an advanced host for lithium-sulfur battery.

Wang H, Liu J, Ju W, Xu X, Chen J Sci Rep. 2024; 14(1):13714.

PMID: 38877113 PMC: 11178808. DOI: 10.1038/s41598-024-64067-8.


Insight into the Storage Mechanism of Sandwich-Like Molybdenum Disulphide/Carbon Nanofibers Composite in Aluminum-Ion Batteries.

Wang X, Zhuang R, Liu X, Hu M, Shen P, Luo J Nanomaterials (Basel). 2024; 14(5).

PMID: 38470773 PMC: 10934325. DOI: 10.3390/nano14050442.


References
1.
Sen U, Mitra S . High-rate and high-energy-density lithium-ion battery anode containing 2D MoS₂ nanowall and cellulose binder. ACS Appl Mater Interfaces. 2013; 5(4):1240-7. DOI: 10.1021/am3022015. View

2.
Shi Y, Zhou W, Lu A, Fang W, Lee Y, Hsu A . van der Waals epitaxy of MoS₂ layers using graphene as growth templates. Nano Lett. 2012; 12(6):2784-91. DOI: 10.1021/nl204562j. View

3.
Hwang H, Kim H, Cho J . MoS₂ nanoplates consisting of disordered graphene-like layers for high rate lithium battery anode materials. Nano Lett. 2011; 11(11):4826-30. DOI: 10.1021/nl202675f. View

4.
Chang Y, Lin C, Chen T, Hsu C, Lee Y, Zhang W . Highly efficient electrocatalytic hydrogen production by MoS(x) grown on graphene-protected 3D Ni foams. Adv Mater. 2012; 25(5):756-60. DOI: 10.1002/adma.201202920. View

5.
Zhan Y, Liu Z, Najmaei S, Ajayan P, Lou J . Large-area vapor-phase growth and characterization of MoS(2) atomic layers on a SiO(2) substrate. Small. 2012; 8(7):966-71. DOI: 10.1002/smll.201102654. View