» Articles » PMID: 23598200

A Piezoelectric Drop-on-demand Generator for Accurate Samples in Capillary Electrophoresis

Overview
Journal Talanta
Publisher Elsevier
Specialty Chemistry
Date 2013 Apr 20
PMID 23598200
Citations 6
Authors
Affiliations
Soon will be listed here.
Abstract

In this work, we propose a piezoelectric droplet generator for injection of well-defined amounts of sample in capillary electrophoresis. We demonstrate stable, precise and drop-on-demand droplet formation for various solutions, with precise control of waveform driving piezoelectric crystal inside the ink-jet head. By tuning the waveform, we can also manipulate the droplet size and delivery frequency. This injector was used in sampling for capillary electrophoresis. As a state-of-the-art application, the analysis of theobromine, caffeine and theophiline using micellar electrokinetic chromatography was developed. The volume of sample (single droplet) analyzed in this experiment was 179 pL (RSD=1.2%, n=10). The detection limits for caffeine, theobromine, and theophiline are 0.02, 0.08 and 0.06 mM L(-1), respectively. Compared with conventional methods, the combination of picoliter droplet dispenser with capillary electrophoresis allows precise and accurate sampling, as well as for reduced sample consumption, which will prove to be an efficient tool in quantitative separation and analysis.

Citing Articles

Intelligent Optimization Method of Piezoelectric Ejection System Design Based on Finite Element Simulation and Neural Network.

Li X, Zhao Y 3D Print Addit Manuf. 2024; 11(3):e1073-e1086.

PMID: 39359608 PMC: 11442184. DOI: 10.1089/3dp.2022.0286.


Applications of chromatographic methods in metabolomics: A review.

Ovbude S, Sharmeen S, Kyei I, Olupathage H, Jones J, Bell R J Chromatogr B Analyt Technol Biomed Life Sci. 2024; 1239:124124.

PMID: 38640794 PMC: 11618781. DOI: 10.1016/j.jchromb.2024.124124.


The Evaluation and Exploration of Piezoelectric Parameter Optimization for Droplet Ejection in Binder Jet 3D Printing Drugs.

Wang S, Han X, Gao X, Zhang H, Li C, Duan S 3D Print Addit Manuf. 2023; 10(5):1090-1100.

PMID: 37886408 PMC: 10599426. DOI: 10.1089/3dp.2022.0131.


Performance Study of Piezoelectric Injection System Based on Finite Element Simulation.

Li X, Zhao Y Micromachines (Basel). 2023; 14(4).

PMID: 37420970 PMC: 10141886. DOI: 10.3390/mi14040738.


Drop impact printing.

Modak C, Kumar A, Tripathy A, Sen P Nat Commun. 2020; 11(1):4327.

PMID: 32859927 PMC: 7455714. DOI: 10.1038/s41467-020-18103-6.