Temizci T, Bozogullari H
BMC Oral Health. 2024; 24(1):334.
PMID: 38486195
PMC: 10938812.
DOI: 10.1186/s12903-024-04016-z.
Tang C, Mercelis B, Ahmed M, Yoshihara K, Peumans M, Van Meerbeek B
J Adhes Dent. 2023; 25():241-256.
PMID: 37975313
PMC: 11734254.
DOI: 10.3290/j.jad.b4646953.
Karabulut Gencer B, Acar E, Tarcin B
Eur Oral Res. 2023; 57(1):41-48.
PMID: 37020638
PMC: 10069798.
DOI: 10.26650/eor.20231076495.
Fathy H, Hamama H, El-Wassefy N, Mahmoud S
BMC Oral Health. 2022; 22(1):635.
PMID: 36564766
PMC: 9789622.
DOI: 10.1186/s12903-022-02674-5.
Ozen F, Demirkol N, Parlar Oz O
J Adv Prosthodont. 2020; 12(3):150-156.
PMID: 32601534
PMC: 7314631.
DOI: 10.4047/jap.2020.12.3.150.
Endocrown Restoration on Postendodontics Treatment on Lower First Molar.
Irmaleny , Zuleika , Ardjanggi S, Mardiyah A, Wahjuningrum D
J Int Soc Prev Community Dent. 2019; 9(3):303-310.
PMID: 31198705
PMC: 6559040.
DOI: 10.4103/jispcd.JISPCD_399_18.
Hydroxyapatite coating effect on the bond strength between CAD/CAM materials and a resin cement.
Sagsoz O, Sagsoz N, Yurtcan M, Ozcelik N
Odontology. 2019; 107(4):491-499.
PMID: 30903321
DOI: 10.1007/s10266-019-00420-y.
Wear of resin composites: Current insights into underlying mechanisms, evaluation methods and influential factors.
Tsujimoto A, Barkmeier W, Fischer N, Nojiri K, Nagura Y, Takamizawa T
Jpn Dent Sci Rev. 2018; 54(2):76-87.
PMID: 29755618
PMC: 5944074.
DOI: 10.1016/j.jdsr.2017.11.002.
Effects of three silane primers and five adhesive agents on the bond strength of composite material for a computer-aided design and manufacturing system.
Shinohara A, Taira Y, Sakihara M, Sawase T
J Appl Oral Sci. 2018; 26:e20170342.
PMID: 29742254
PMC: 5933835.
DOI: 10.1590/1678-7757-2017-0342.
Dental biomaterials for chairside CAD/CAM: State of the art.
Lambert H, Durand J, Jacquot B, Fages M
J Adv Prosthodont. 2017; 9(6):486-495.
PMID: 29279770
PMC: 5741454.
DOI: 10.4047/jap.2017.9.6.486.
Resin Nanoceramic CAD/CAM Restoration of the Primary Molar: 3-Year Follow-Up Study.
Demirel A, Bezgin T, Akaltan F, Sari S
Case Rep Dent. 2017; 2017:3517187.
PMID: 28713601
PMC: 5496112.
DOI: 10.1155/2017/3517187.
Evaluation of the flexural strength and microhardness of provisional crown and bridge materials fabricated by different methods.
Digholkar S, Madhav V, Palaskar J
J Indian Prosthodont Soc. 2016; 16(4):328-334.
PMID: 27746595
PMC: 5062140.
DOI: 10.4103/0972-4052.191288.
Marginal and internal fit of nano-composite CAD/CAM restorations.
Park S, Yoo Y, Shin Y, Cho B, Baek S
Restor Dent Endod. 2016; 41(1):37-43.
PMID: 26877989
PMC: 4751205.
DOI: 10.5395/rde.2016.41.1.37.
Effects of air abrasion with alumina or glass beads on surface characteristics of CAD/CAM composite materials and the bond strength of resin cements.
Nobuaki A, Keiichi Y, Takashi S
J Appl Oral Sci. 2016; 23(6):629-36.
PMID: 26814465
PMC: 4716701.
DOI: 10.1590/1678-775720150261.
Influence of proximal box elevation on the marginal quality and fracture behavior of root-filled molars restored with CAD/CAM ceramic or composite onlays.
Ilgenstein I, Zitzmann N, Buhler J, Wegehaupt F, Attin T, Weiger R
Clin Oral Investig. 2014; 19(5):1021-8.
PMID: 25248949
DOI: 10.1007/s00784-014-1325-z.
Tensile bond strength of resin composite repair in vitro using different surface preparation conditionings to an aged CAD/CAM resin nanoceramic.
Stawarczyk B, Krawczuk A, Ilie N
Clin Oral Investig. 2014; 19(2):299-308.
PMID: 24930133
DOI: 10.1007/s00784-014-1269-3.
The effect of different pretreatment methods of PMMA-based crowns on the long-term tensile bond strength to dentin abutments.
Keul C, Kohen D, Eichberger M, Roos M, Gernet W, Stawarczyk B
Clin Oral Investig. 2014; 19(1):35-43.
PMID: 24585261
DOI: 10.1007/s00784-014-1215-4.
Load-bearing capacity of CAD/CAM milled polymeric three-unit fixed dental prostheses: effect of aging regimens.
Stawarczyk B, Ender A, Trottmann A, Ozcan M, Fischer J, Hammerle C
Clin Oral Investig. 2012; 16(6):1669-77.
PMID: 22209963
DOI: 10.1007/s00784-011-0670-4.
